iTeh Standards logo
EURUSD
Your shopping cart is empty.
SIST

SIST EN IEC 61439-1:2021/AC:2022

(Corrigendum)

Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC 61439-1:2020/COR1:2021)

Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC 61439-1:2020/COR1:2021)

IEC Corrected version

Niederspannungs-Schaltgerätekombinationen - Teil 1: Allgemeine Festlegungen (IEC 61439-1:2020/COR1:2021)

Ensembles d’appareillage à basse tension - Partie 1: Règles générales (IEC 61439-1:2020/COR1:2021)

Sestavi nizkonapetostnih stikalnih in krmilnih naprav - 1. del: Splošna pravila - Popravek AC (IEC 61439-1:2020/COR1:2021)

General Information

Status
Published
Publication Date
02-Feb-2022
ICS
29.130.20 - Low voltage switchgear and controlgear
Technical Committee
SKA - Switchgear and control gear
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2022
Due Date
08-Apr-2022
Completion Date
03-Feb-2022
Directive
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Mandate
M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
Ref Project
EN IEC 61439-1:2021/AC:2022-01 - Low-voltage switchgear and controlgear assemblies - Part 1: General rules

Relations

Corrects
SIST EN IEC 61439-1:2021 - Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC 61439-1:2020)
Effective Date
21-Dec-2021
SIST EN IEC 61439-1:2021/AC:2022SIST EN IEC 61439-1:2021/AC:2022
PreviousNext
Corrigendum
SIST EN IEC 61439-1:2021/AC:2022
English and French language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2022
Sestavi nizkonapetostnih stikalnih in krmilnih naprav - 1. del: Splošna pravila -
Popravek AC (IEC 61439-1:2020/COR1:2021)
Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC 61439-
1:2020/COR1:2021)
Niederspannungs-Schaltgerätekombinationen - Teil 1: Allgemeine Festlegungen (IEC
61439-1:2020/COR1:2021)
Ensembles d’appareillage à basse tension - Partie 1: Règles générales (IEC 61439-
1:2020/COR1:2021)
Ta slovenski standard je istoveten z: EN IEC 61439-1:2021/AC:2022-01
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61439-
1:2021/AC:2022-01
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2022
ICS 29.130.20
English Version
Low-voltage switchgear and controlgear assemblies - Part 1:
General rules
(IEC 61439-1:2020/COR1:2021)
Ensembles d'appareillage à basse tension - Partie 1: Niederspannungs-Schaltgerätekombinationen - Teil 1:
Règles générales Allgemeine Festlegungen
(IEC 61439-1:2020/COR1:2021) (IEC 61439-1:2020/COR1:2021)
This corrigendum becomes effective on 21 January 2022 for incorporation in the English language version of the EN.

European Committee for Electrotechnical Standar
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

Frequently Asked Questions

SIST EN IEC 61439-1:2021/AC:2022 is a corrigendum published by the Slovenian Institute for Standardization (SIST). Its full title is "Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC 61439-1:2020/COR1:2021)". This standard covers: IEC Corrected version

IEC Corrected version

SIST EN IEC 61439-1:2021/AC:2022 is classified under the following ICS (International Classification for Standards) categories: 29.130.20 - Low voltage switchgear and controlgear. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN IEC 61439-1:2021/AC:2022 has the following relationships with other standards: It is inter standard links to SIST EN IEC 61439-1:2021. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

SIST EN IEC 61439-1:2021/AC:2022 is associated with the following European legislation: EU Directives/Regulations: 2014/35/EU; Standardization Mandates: M/511. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

You can purchase SIST EN IEC 61439-1:2021/AC:2022 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.

The article is about the corrected version of IEC 61439-1:2020/COR1:2021 standard, titled "Low-voltage switchgear and controlgear assemblies - Part 1: General rules." This standard provides general rules for low-voltage switchgear and controlgear assemblies. The corrected version, SIST EN IEC 61439-1:2021/AC:2022, includes corrections to the original version of the standard.

기사 제목: SIST EN IEC 61439-1:2021/AC:2022 - 저전압 스위치기어 및 제어기어 어셈블리 - 제1부: 일반 규칙 (IEC 61439-1:2020/COR1:2021) 기사 내용: IEC 수정판 이 기사는 저전압 스위치기어 및 제어기어 어셈블리에 대한 국제 전기기술위원회 (IEC) 표준 61439-1:2020의 수정판에 대해 논의하고 있습니다. 업데이트된 버전은 SIST EN IEC 61439-1:2021/AC:2022로 제목이 지정되었으며, 이는 이러한 유형의 장치에 대한 일반 규칙을 포함하고 있습니다.

記事のタイトル：SIST EN IEC 61439-1:2021/AC:2022 - 低電圧のスイッチギアおよび制御ギアの組立て - パート1：一般的な規則（IEC 61439-1：2020/COR1：2021） 記事の内容：IEC訂正版 この記事は、IEC 61439-1：2020/COR1：2021規格の訂正版についての内容です。この規格は、低電圧のスイッチギアおよび制御ギアの組立てに関する一般的な規則を提供しています。訂正版であるSIST EN IEC 61439-1：2021/AC：2022には、元の規格に対する修正が含まれています。

記事のタイトル：SIST EN IEC 61439-1：2021/AC：2022 - 低電圧スイッチギアおよび制御ギアアセンブリ- 第1部：一般的な規則（IEC 61439-1：2020 / COR1：2021） 記事の内容：IEC修正版 この記事は、低電圧スイッチギアおよび制御ギアアセンブリに関する国際電気標準委員会（IEC）規格61439-1：2020の修正版について議論しています。更新されたバージョンはSIST EN IEC 61439-1：2021/AC：2022というタイトルであり、これにはこの種の装置の一般的な規則が含まれています。

The article discusses the corrected version of the International Electrotechnical Commission (IEC) standard 61439-1:2020 for low-voltage switchgear and controlgear assemblies. The updated version is titled SIST EN IEC 61439-1:2021/AC:2022 and includes general rules for these types of devices.

기사 제목: SIST EN IEC 61439-1:2021/AC:2022 - 저전압 스위치기어 및 제어기어 어셈블리 - 제 1 부: 일반 규칙 (IEC 61439-1:2020/COR1:2021) 기사 내용: IEC 수정판 이 기사는 IEC 61439-1:2020/COR1:2021 표준의 수정판에 대한 내용입니다. 해당 표준은 저전압 스위치기어 및 제어기어 어셈블리에 대한 일반 규칙을 제공합니다. 수정판인 SIST EN IEC 61439-1:2021/AC:2022에는 원본 표준에 대한 수정 사항이 포함되어 있습니다.

This May Also Interest You

SIST
SIST EN IEC 62683-2-2:2026(Main)
Low-voltage switchgear and controlgear - Product data and properties for information exchange - Engineering data - Part 2-2: Switchgear and controlgear assembly objects for building information modelling (IEC 62683-2-2:2025)
EN IEC 62683-2-2:2025

IEC 62683-2-2:2025 specifies the building information modelling (BIM) with the physical characteristics and technical services of low-voltage switchgear and controlgear assemblies to be used mainly for the construction phase of the building and also for delivering data for operation.
This document covers all types of assemblies covered by the IEC 61439 series which can be installed in a building.
Busbar trunking systems defined by IEC 61439-6 are under consideration for a next edition.
These BIM object models, registered in IEC CDD, are intended to supply the process defined by ISO 16739 series.
This document does not cover:
– the build-in components included within the assembly such as switchgear and controlgear,
– safety related control system of machinery,
– the detailed electrical and mechanical configuration of the assembly
– logistic information.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63208:2025(Main)
Low-voltage switchgear and controlgear and their assemblies - Security requirements (IEC 63208:2025)
EN IEC 63208:2025

IEC 63208:2025 This document applies to the main functions of switchgear and controlgear and their assemblies, called equipment, in the context of operational technology (OT 3.1.34). It is applicable to equipment with wired or wireless data communication means and their physical accessibility, within their limits of environmental conditions. It is intended to achieve the appropriate physical and cybersecurity mitigation against vulnerabilities to security threats.
This document provides requirements on the appropriate:
– security risk assessment to be developed including the attack levels, the typical threats, the impact assessment and the relationship with safety;
– levels of exposure of the communication interface and the determination of the equipment security level;
– assessment of the exposure level of the communication interfaces;
– assignment of the required security measures for the equipment;
– countermeasures for the physical access and the environment derived from ISO/IEC 27001;
– countermeasures referring to IEC 62443-4-2 with their criteria of applicability;
– user instructions for installation, operation and maintenance;
– conformance verification and testing, and – security protection profiles by family of equipment (Annex E to Annex I).
In particular, it focuses on potential vulnerabilities to threats resulting in:
– unintended operation, which can lead to hazardous situations;
– unavailability of the protective functions (overcurrent, earth fault, etc.);
– other degradation of main function.
It also provides guidance on the cybersecurity management with the:
– roles and responsibilities (Table 4);
– typical architectures (Annex A);
– use cases (Annex B);
– development methods (Annex C);
– recommendations to be provided to users and for integration into an assembly (Annex D);
– bridging references to cybersecurity management systems (Annex K).
This document does not cover security requirements for:
– information technology (IT);
– industrial automation and control systems (IACS), engineering workstations and their software applications;
– critical infrastructure or energy management systems;
– network device (communication network switch or virtual private network terminator), or
– data confidentiality other than for critical security parameters;
– design lifecycle management. For this aspect, see IEC 62443-4-1, ISO/IEC 27001 or other security lifecycle management standards.

  • Standard
    131 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-5-7:2025(Main)
Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Proximity devices with analogue output (IEC 60947-5-7:2024)
EN IEC 60947-5-7:2025

IEC 60947-5-7:2024 states the requirements for proximity devices that correspond to the scope of IEC 60947-5-2:2019 with analog output (PDAO) and/or a digital output to transmit a corresponding digital value representing the detected sensing input. These devices can provide additional parameters.
This second edition cancels and replaces the first edition published in 2003. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) New structure;
b) Update and expansion of definitions on analog output properties;
c) Expanded performance requirements on analog output;
d) Update and new normative references;
e) Update of EMC requirements;
f) Harmonization with IEC 62828 series;
g) Harmonization with IEC 62683 and IEC 61987 definitions;
h) Harmonization with IEC 61131-2 requirements;
i) Update of the Annex A (former Annex G), Example of the determination of the conformity;
j) New Annex B, Overview tests and influence quantities;
k) New Annex C, Additional requirements for proximity switches with analog output incorporating a built-in communication interface complying with IEC 61131-9;
l) New Annex D, Main characteristics for proximity devices with analog output.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61095:2025(Main)
Electromechanical contactors for household and similar purposes (IEC 61095:2023)
EN IEC 61095:2025

IEC 61095:2023 is available as IEC 61095:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 61095:2023 applies to electromechanical air break contactors for household and similar purposes provided with main contacts intended to be connected to circuits the rated voltage of which does not exceed 440 V AC (between phases) with rated operational currents less than or equal to 63 A for utilization category AC-7a, and 32 A for utilization categories AC‑7b, AC‑7c and AC-7d (expressed in rated power), and rated conditional short-circuit current less than or equal to 6 kA. This third edition cancels and replaces the second edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) addition of requirements for screwless terminals;
b) addition of requirements for the switching of LED lamps. Contactors for domestic and similar applications can be used for controlling lighting loads which is increasingly using LED lamp technology. A specific category for contactors is created: AC-7d. Requirements and tests are added to cover this market development, mainly for making and breaking and conventional operational performance;
c) addition of requirements for contactors with electronically controlled electromagnet. Household contactors with electronically controlled electromagnet are available for years on the market. To fully cover such device, requirements and tests are added, dealing mainly with operating limits, behaviour in abnormal conditions, breakdown of components, EMC tests, etc.
d) embedded software. More and more contactors are incorporating electronic circuits with embedded software. A reference is provided to guide the design of the software.

  • Standard
    146 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62626-1:2025(Main)
Low-voltage switchgear and controlgear enclosed equipment - Part 1: Additional requirements for enclosed switch-disconnectors in accordance with IEC 60947-3 - Isolation of electrical equipment during repair and maintenance work in specific applications (IEC 62626-1:2023)
EN IEC 62626-1:2025

IEC 62626-1:2023 is available as IEC 62626-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 62626-1:2023 applies to enclosed switches-disconnectors with rated voltages up to 1 000 V AC for repair and maintenance work or cleaning work in load circuits. Devices within the scope of this document are switch-disconnectors in accordance with IEC 60947-3 with specific additional requirements. Enclosed switch-disconnectors in this document are suitable for isolation in accordance with the IEC 60947 series and are not equipped with means for remote control or automatic switching to avoid unexpected or accidental start. These devices are not used for operational switching, for example quick start and stop, jogging. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) update of this document based on IEC 60947-1:2020.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-4-1:2025(Main)
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2023)
EN IEC 60947-4-1:2025

IEC 60947-4-1:2023 is applicable to the following equipment:
- electromechanical contactors and starters including motor protective switching devices (MPSD and IMPSD);
- actuators of contactor relays;
- contacts dedicated exclusively to the coil circuit of the contactor or the contactor relay;
- dedicated accessories (e.g. dedicated wiring, dedicated latch accessory);
intended to be connected to distribution circuits, motors circuits and other load circuits, the rated voltage of which does not exceed 1 000 V AC or 1 500 V DC.
This fifth edition cancels and replaces the fourth edition published in 2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) objective in the scope;
b) instantaneous only motor protective switching device IMPSD (3.5.33);
c) kinds of equipment (5.2.1);
d) methods of overload protection of motors (5.2.6);
e) adoption of the AC-7d from IEC 61095:2023 (in 5.4.2);
f) separately mounted overload relay of a starter (in 5.7.3 b));
g) starter and contactor suitable for use downstream to basic drive module (6.1.2 w));
h) reference to IEC TS 63058 for environmental aspects (in 6.4);
i) wiring subject to movement (in 8.1.3);
j) use of voltage transient limiting device (8.1.18);
k) accessible parts subject to temperature limits (in 8.2.2.3);
l) reference to Annex X of IEC 60947-1:2020 for the co-ordination of MPSD with SCPD (8.2.5.4);
m) reference to IEC TR 63216 with different EMC environments (8.3.1);
n) reference to IEC TR 63201 for the embedded software design (8.4);
o) reference to IEC TS 63208 for cybersecurity aspects (8.5);
p) update and completion of the measurement method of the power consumption of the electromagnet (9.3.3.2.1.2);
q) update of Annex C including rational about AC-3e;
r) determination of the critical load current for photovoltaic applications (M.8.7).

  • Standard
    191 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-9-2:2025(Main)
Low-voltage switchgear and controlgear - Part 9-2: Active arc-fault mitigation systems - Optical-based internal arc-detection and mitigation devices (IEC 60947-9-2:2021)
EN IEC 60947-9-2:2025

This document covers internal arc-fault control devices, hereinafter referred to as IACD, which
are intended to:
- detect internal arc-faults in low-voltage switchgear and controlgear assemblies, by
processing (at a minimum) the optical effect of an internal arc-fault, and
- operate mitigation device (either external or combined)
in order to minimize the effects of the internal arc-fault (see Figure 1).
For the purpose of this document the terms "light" or "optical" covers more than visible spectra.
They may cover also, for example, infrared or ultraviolet electromagnetic radiations (see
Annex D).
For combined-type IACD, this document is considered in addition to the relevant product
standard for internal arc-fault mitigation devices (IARD per IEC TS 63107:2020). Compliance
to the relevant product standard is mandatory and cannot be claimed by testing to this document
alone.
NOTE 1 Low-voltage switchgear and controlgear assemblies are usually described by IEC 61439 series.
[Figure 1]
Therefore, this document covers the following:
- internal arc-fault control device (stand-alone, multifunction or combined);
- one or more associated sensor(s) used to detect optical effect of the internal arc-fault;
- sensor(s), sensing another physical effect, to confirm the fault;
- associated or combined mitigation device.
An IACD is not intended to trigger under normal operation of low-voltage switchgear and
controlgear (i.e. absence of internal arc-fault), including normal arcing associated with
operation of disconnecting and switching devices.
This document only covers the following methods:
- optical detection of the light caused by an internal arc-fault;
- optional confirmation of internal arc-fault by line current measurement.
Many different conductive materials could be used in LV assemblies (e.g. steel, copper,
aluminium). Nevertheless, tests specified in this document are deemed to represent the most
critical and challenging conditions for arc-detection and cover all combinations of conductive
materials.
NOTE 2 Compared to other materials (e.g. steel, aluminium), copper leads to a lower optical radiation energy.
The rated voltage of the assembly in which an IACD is installed does not exceed 1 000 V AC.
Such devices are designed to be operated and maintained by skilled persons only.
This document does not cover:
- DC internal arc-fault detection and control;
- overcurrent relays;
- AFDD (arc-fault detection devices) as defined by IEC 62606;
- guidance on installation within assemblies;
NOTE 3 The integration of an IACD into an assembly is described in IEC TS 63107.
- use with additional measures needed for installation and operation within explosive
atmospheres. These are given in IEC 60079 series documents;
- requirements for embedded software and firmware design rules; for this subject, the
manufacturer is responsible for taking additional safety measures;
NOTE 4 IEC TR 63201 describes rules for firmware and embedded software development preventing errors in
software.
- cybersecurity aspects; for this subject, the manufacturer is responsible for taking additional
safety measures;
NOTE 5 See IEC TS 63208.
- mobile applications.
NOTE 6 Even when addressing internal arc-fault mitigation devices, this document does not supersede any other
relevant product standard (e.g. IEC 60947-2 or IEC 60947-9-1).
NOTE 7 DC arcing fault phenomena are under consideration. Further investigation is needed to comprehend DC
arcing phenomena and required sensing.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-3:2021/A1:2025(Amendment)
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2020/AMD1:2025)
EN IEC 60947-3:2021/A1:2025
  • Amendment
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-7-1:2025(Main)
Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors (IEC 60947-7-1:2025)
EN IEC 60947-7-1:2025

IEC 60947-7-1:2025 specifies requirements for terminal blocks and test disconnect terminal blocks according to Annex D with screw-type or screw-less-type clamping units primarily intended for industrial or similar use and to be fixed to a support to provide electrical and mechanical connection between copper conductors. It applies to terminal blocks intended to connect round copper conductors, with or without special preparation, having a cross-section between 0,05 mm2/30 AWG and 300 mm2/600 kcmil, intended to be used in circuits of a rated voltage not exceeding 1 000 V AC up to 1 000 Hz or 1 500 V DC. The tests on terminal blocks are made with AC or DC supply as required in relevant clauses of this document.
This fourth edition cancels and replaces the third edition published in 2009. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Scope extension for smaller conductor cross-sections;
b) Implementation of a contact pressure via insulation material (CoPI) test;
c) Introduction of new informative Annex E for larger cross-sections;
d) Reorganisation of all tables merged into two tables for electrical and mechanical values;
e) Implementation of AWG-sizes conductor types as an equivalent type of metric conductor with examples in Annex C;
f) Reorganisation of Annex D test disconnect terminal blocks to enhance readability;
g) Introduction of new informative Annex A for main characteristics of terminal blocks.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-5-1:2025(Main)
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (IEC 60947-5-1:2024)
EN IEC 60947-5-1:2025

IEC 60947-5-1:2024 applies to control circuit devices and switching elements intended for controlling, signalling, interlocking, etc., of switchgear and controlgear.
It applies to control circuit devices having a rated voltage not exceeding 1 000 V AC (at a frequency not exceeding 1 000 Hz) or 600 V DC.
This fifth edition cancels and replaces the fourth edition published in 2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) update of the scope structure and exclusions;
b) requirements for control circuits;
c) update of the normal service conditions (e.g. shock and vibration);
d) update of information and marking requirements including environmental information requirements referencing IEC TS 63058:2021;
e) update of the constructional requirements and the corresponding tests considering safety aspects (e.g. artificial optical radiation, security aspects, limited energy source, stored charge energy circuit);
f) update of the EMC requirements according to the generic documents;
g) new requirements for reed contact magnetic switches in Annex D;
h) requirements for class II circuit devices achieved by double or reinforced insulation in Annex F;
i) update of pull-out tests in Annex G;
j) information requirements for audible signalling device in Annex J;
k) insertion of new Annex O.

  • Standard
    136 pages
    English language
    sale 10% off
    e-Library read for
    1 day