SIST EN 2591-6402:2004
(Main)Aerospace series - Elements of electrical and optical connection - Test methods - Part 6402: Optical elements - Shock
Aerospace series - Elements of electrical and optical connection - Test methods - Part 6402: Optical elements - Shock
This standard specifies a method of assessing the ability of optical connection elements (including permanent connections) and fibre optic couplers to withstand specified severities of mechanical shock.
It shall be used together with EN 2591-100.
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 6402: Optische Verbindungselemente - Stöße
Diese Norm legt ein Verfahren zum Nachweis der Widerstandsfähigkeit von optischen Verbindungselementen (einschließlich dauerhaften Verbindungen) und LWL-Kopplern gegenüber mechanischen Stößen mit vorgegebenem Schärfegrad fest.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6402 : Organes optiques - Chocs
La présente norme prescrit une méthode pour déterminer la capacité pour des éléments de connexion optique (y compris les connexions permanentes) et des coupleurs à fibre optiques à résister à des chocs mécaniques à une sévérité spécifiée.
Elle doit être utilisée conjointement avec EN 2591-100.
Aerospace series - Elements of electrical and optical connection - Test methods - Part 6402: Optical elements - Shock
General Information
- Status
- Published
- Publication Date
- 30-Apr-2004
- Technical Committee
- I08 - Imaginarni 08
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-May-2004
- Due Date
- 01-May-2004
- Completion Date
- 01-May-2004
Overview
EN 2591-6402:2001 - part of the CEN/AECMA aerospace series - specifies a method for assessing the ability of optical connection elements (including permanent connections) and fibre optic couplers to withstand mechanical shock. Intended to be used together with EN 2591-100 (General), the standard defines the test scope, specimen preparation references, monitoring methods and final inspection requirements needed for shock qualification of aerospace optical components.
Key Topics
- Scope and purpose: Verifies resistance of optical elements and fibre optic couplers to specified severities of mechanical shock relevant to aerospace systems.
- Test-to standards linkage: Designed to be used with EN 2591-100 and references multiple EN 2591 parts for detailed procedures and measurements.
- Specimen preparation: Refers to EN 2591-402 for preparation and requires specification of details such as maximum insertion loss, allowable optical discontinuity, cable/fibre type and length, and mounting/termination methods.
- Apparatus and instrumentation: Test apparatus and measurement techniques are referenced to EN 2591-402 and EN 2591-602; do not invent or alter apparatus requirements without consulting those parts.
- Test procedure: Shock is applied along the three tri-rectangular axes; optical discontinuity monitoring during shock shall be performed in accordance with EN 2591-602 Method B unless otherwise specified by the product standard.
- Initial and final measurements: Initial checks and final acceptance testing (visual inspection, insertion loss, mating/unmating force as applicable) are carried out in line with EN 2591‑402, EN 2591‑6101, EN 2591‑601 and EN 2591‑408.
- Conformance criteria: Products must meet the maximum insertion loss and optical discontinuity limits specified in the product technical specification.
Applications
- Qualification and verification of aerospace optical connectors, permanent splices and fibre-optic couplers used in aircraft, spacecraft and related aerospace systems.
- Acceptance testing by aerospace manufacturers, OEMs, test laboratories and quality/assurance teams to ensure optical interconnect reliability under shock environments.
- Procurement and specification: buyers and systems engineers can reference EN 2591-6402 when defining shock resistance requirements for optical components in aerospace projects.
Related Standards
- EN 2591-100 - Aerospace series: Test methods - Part 100: General
- EN 2591-402 - Test methods: Shock (general mechanical shock procedures)
- EN 2591-602 - Optical elements: Variation of attenuation and optical discontinuity (Method B referenced)
- EN 2591-601 - Optical elements: Insertion loss
- EN 2591-6101 - Optical elements: Visual examination
- EN 2591-408 - Mating and unmating forces
Keywords: EN 2591-6402, aerospace optical connectors, shock testing, fibre optic couplers, optical discontinuity, insertion loss, AECMA, CEN.
Frequently Asked Questions
SIST EN 2591-6402:2004 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Elements of electrical and optical connection - Test methods - Part 6402: Optical elements - Shock". This standard covers: This standard specifies a method of assessing the ability of optical connection elements (including permanent connections) and fibre optic couplers to withstand specified severities of mechanical shock. It shall be used together with EN 2591-100.
This standard specifies a method of assessing the ability of optical connection elements (including permanent connections) and fibre optic couplers to withstand specified severities of mechanical shock. It shall be used together with EN 2591-100.
SIST EN 2591-6402:2004 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
You can purchase SIST EN 2591-6402:2004 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2004
Aerospace series - Elements of electrical and optical connection - Test methods -
Part 6402: Optical elements - Shock
Aerospace series - Elements of electrical and optical connection - Test methods - Part
6402: Optical elements - Shock
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren -
Teil 6402: Optische Verbindungselemente - Stöße
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais -
Partie 6402 : Organes optiques - Chocs
Ta slovenski standard je istoveten z: EN 2591-6402:2001
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 2591-6402
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2001
ICS 49.060
English version
Aerospace series - Elements of electrical and optical connection
- Test methods - Part 6402: Optical elements - Shock
Série aérospatiale - Organes de connexion électrique et Luft- und Raumfahrt - Elektrische und optische
optique - Méthodes d'essais - Partie 6402: Organes Verbindungselemente - Prüfverfahren - Teil 6402: Optische
optiques - Chocs Elemente - Stöße
This European Standard was approved by CEN on 5 August 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2591-6402:2001 E
worldwide for CEN national Members.
Foreword
This European Standard has been prepared by the European Association of Aerospace Manufacturers
(AECMA).
After inquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national stand
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...