SIST EN 477:2018
(Main)Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to impact of profiles by falling mass
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to impact of profiles by falling mass
This European Standard specifies a method for determining the resistance to impact by a falling mass at −10 °C of unplasticized poly(vinyl chloride) (PVC-U) profiles.
It is also applicable to PVC-based profiles at specified temperatures/test conditions.
Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) - Bestimmung der Stoßfestigkeit von Profilen mittels Fallbolzen
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Stoßfestigkeit von Profilen aus weich-macherfreiem Polyvinychlorid (PVC-U) mittels Fallbolzen bei −10 °C fest.
Es ist auch für PVC-basierte Profile bei vorgegebenen Temperaturen/Prüfbedingungen anwendbar.
Profilés de poly(chlorure de vinyle) non plastifié (PVC-U) - Détermination de la résistance aux chocs par masse tombante des profilés
La présente Norme européenne spécifie une méthode de détermination de la résistance au choc des profilés en poly(chlorure de vinyle) non plastifié (PVC-U) au moyen d’une masse tombante, à une température de −10 °C.
Elle s’applique également aux profilés à base de PVC à des températures/dans des conditions d’essai spécifiées.
Polimerni materiali - Profili na osnovi polivinilklorida (PVC) - Ugotavljanje odpornosti profilov proti učinku padajoče mase
Ta evropski standard določa metodo za ugotavljanje odpornosti proti učinku padajoče mase neprevlečenih profilov iz trdega polivinilklorida (PVC-U) pri −10 °C.
Uporablja se tudi za profile na osnovi PVC pri določenih temperaturah/preskusnih pogojih.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 477:2018
01-april-2018
1DGRPHãþD
SIST EN 477:2000
3ROLPHUQLPDWHULDOL3URILOLQDRVQRYLSROLYLQLONORULGD 39& 8JRWDYOMDQMH
RGSRUQRVWLSURILORYSURWLXþLQNXSDGDMRþHPDVH
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to
impact of profiles by falling mass
Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) - Bestimmung der Stoßfestigkeit
von Profilen mittels Fallbolzen
Profilés de poly(chlorure de vinyle) non plastifié (PVC-U) - Détermination de la résistance
aux chocs par masse tombante des profilés
Ta slovenski standard je istoveten z: EN 477:2018
ICS:
83.140.99 Drugi izdelki iz gume in Other rubber and plastics
polimernih materialov products
SIST EN 477:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 477:2018
---------------------- Page: 2 ----------------------
SIST EN 477:2018
EN 477
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2018
EUROPÄISCHE NORM
ICS 83.080.20; 83.140.99 Supersedes EN 477:1995
English Version
Plastics - Poly(vinyl chloride) (PVC) based profiles -
Determination of the resistance to impact of profiles by
falling mass
Plastiques - Profilés à base de poly(chlorure de vinyle) Kunststoffe - Profile auf Basis von Polyvinylchlorid
(PVC) - Détermination de la résistance aux chocs par (PVC) - Bestimmung der Stoßfestigkeit von Profilen
masse tombante des profilés mittels Fallbolzens
This European Standard was approved by CEN on 6 December 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 477:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 477:2018
EN 477:2018 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
6 Test specimens . 5
7 Conditioning . 6
8 Procedure. 6
9 Expression of results . 6
10 Test report . 7
2
---------------------- Page: 4 ----------------------
SIST EN 477:2018
EN 477:2018 (E)
European foreword
This document (EN 477:2018) has been prepared by Technical Committee CEN/TC 249 “Plastics”, the
secretariat of which is held by NBN.
This Eur
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.