SIST EN 15534-6:2015/oprA1:2017
(Amendment)Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
This part of EN 15534 specifies the characteristics of fencing profiles and elements made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC).
It is applicable to fencing profiles and elements for non-structural fencing systems.
The security systems, perimeter protections, handrails and load bearing applications are out of the scope of this part of EN 15534.
Any systems made from profiles in the scope of this part of EN 15534 that are affected by regulations are under the responsibility of the system supplier.
EN 15534 1 specifies some of the test methods relevant to this part of EN 15534.
NOTE For editorial reasons, in EN 15534 the abbreviation “WPC” is used for “composites made from cellulose-based materials and thermoplastics”.
Verbundwerkstoffe aus cellulosehaltigen Materialien und Thermoplasten (üblicherweise Holz-Polymer-Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe (NFC) genannt) - Teil 6: Anforderungen an Zaunprofile und -elemente
Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 6 : Spécifications relatives aux profiles et éléments pour clôture
Kompoziti iz materialov na osnovi celuloze in plastomerov (navadno imenovani lesno-polimerni kompoziti (WPC) ali kompoziti iz naravnih vlaken (NFC)) - 6. del: Specifikacije za profile ograj in elementov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 15534-6:2015/oprA1:2017
01-marec-2017
Kompoziti iz materialov na osnovi celuloze in plastomerov (navadno imenovani
lesno-polimerni kompoziti (WPC) ali kompoziti iz naravnih vlaken (NFC)) - 6. del:
Specifikacije za profile ograj in elementov
Composites made from cellulose-based materials and thermoplastics (usually called
wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6:
Specifications for fencing profiles and elements
Verbundwerkstoffe aus cellulosehaltigen Materialien und Thermoplasten (üblicherweise
Holz-Polymer-Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe (NFC) genannt) -
Teil 6: Anforderungen an Zaunprofile und -elemente
Composites à base de matières cellulosiques et de thermoplastiques (communément
appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle
(NFC)) - Partie 6 : Spécifications relatives aux profiles et éléments pour clôture
Ta slovenski standard je istoveten z: EN 15534-6:2015/prA1
ICS:
79.080 Polizdelki iz lesa Semi-manufactures of timber
83.140.99 Drugi izdelki iz gume in Other rubber and plastics
polimernih materialov products
SIST EN 15534-6:2015/oprA1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 15534-6:2015/oprA1:2017
---------------------- Page: 2 ----------------------
SIST EN 15534-6:2015/oprA1:2017
DRAFT
EUROPEAN STANDARD
EN 15534-6:2015
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2017
ICS 79.080; 83.140.99
English Version
Composites made from cellulose-based materials and
thermoplastics (usually called wood-polymer composites
(WPC) or natural fibre composites (NFC)) - Part 6:
Specifications for fencing profiles and elements
Composites à base de matières cellulosiques et de Verbundwerkstoffe aus cellulosehaltigen Materialien
thermoplastiques (communément appelés composites und Thermoplasten (üblicherweise Holz-Polymer-
bois-polymères (WPC) ou composites fibres d'origine Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe
naturelle (NFC)) - Partie 6 : Spécifications relatives aux (NFC) genannt) - Teil 6: Anforderungen an Zaunprofile
profiles et éléments pour clôture und -elemente
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 249.
This draft amendment A1, if approved, will modify the European Standard EN 15534-6:2015. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15534-6:2015/prA1:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 15534-6:2015/oprA1:2017
EN 15534-6:2015/prA1:2017 (E)
Contents Page
European foreword . 3
1 Modification to B.2, Apparatus . 4
2 Modifications to B.5, Procedure .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.