iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60310:2001

(Main)

Railway applications - Traction transformers and inductors on rolling stock

Railway applications - Traction transformers and inductors on rolling stock

Applies to traction transformers on single-phase a.c. line-side powered vehicles and to the various types of inductors inserted in the power or auxiliary circuits of electric vehicles including interference suppression inductors.

Bahnanwendungen - Transformatoren und Drosselspulen auf Bahnfahrzeugen

Applications ferroviaires - Transformateurs de traction et inductances du matériel roulant

S'applique aux transformateurs de traction des véhicules moteurs à courant monophasé côté ligne et aux divers types d'Inductances insérées dans les circuits de puissance ou auxiliaires des véhicules moteurs électriques y compris les inductances d'antiparasitage.

Železniške naprave – Transformatorji vlečnih tokokrogov in dušilke na vlečnih sredstvih

General Information

Status
Withdrawn
Publication Date
31-Jan-2001
Withdrawal Date
31-Aug-2004
ICS
29.180 - Transformers. Reactors
29.280 - Electric traction equipment
Technical Committee
ŽEN - Electrical applications for railways
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Sep-2004
Due Date
01-Sep-2004
Completion Date
01-Sep-2004
Mandate
M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
Ref Project
EN 60310:1996 - Railway applications - Traction transformers and inductors on rolling stock

Relations

Revised
SIST EN 60310:2004 - Railway applications - Traction transformers and inductors on board rolling stock
Effective Date
13-May-2010
Replaced By
SIST EN 60310:2004 - Railway applications - Traction transformers and inductors on board rolling stock
Effective Date
28-Jan-2023

Buy Standard

EN 60310:2001EN 60310:2001
PreviousNext
Standard
EN 60310:2001
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60310:2001
01-februar-2001
äHOH]QLãNHQDSUDYH±7UDQVIRUPDWRUMLYOHþQLKWRNRNURJRYLQGXãLONHQDYOHþQLK
VUHGVWYLK
Railway applications - Traction transformers and inductors on rolling stock
Bahnanwendungen - Transformatoren und Drosselspulen auf Bahnfahrzeugen
Applications ferroviaires - Transformateurs de traction et inductances du matériel roulant
Ta slovenski standard je istoveten z: EN 60310:1996
ICS:
29.180 Transformatorji. Dušilke Transformers. Reactors
29.280 (OHNWULþQDYOHþQDRSUHPD Electric traction equipment
SIST EN 60310:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60310:2001

---------------------- Page: 2 ----------------------

SIST EN 60310:2001

---------------------- Page: 3 ------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50238-1:2021(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 1: General
EN 50238-1:2019

This European Standard describes a process to demonstrate compatibility between Rolling Stock (RST) and Train Detection Systems (TDS) for specific routes. It references the methods of measurement of interference currents and magnetic fields, the methods of measurement of the susceptibility of train detection systems and the characterization of traction power supplies. The process described in this standard is equally applicable to mainline, lightrail and metro type railways.
The basic parameters of compatibility for mainline railways are covered by the ERA Interface document (ERA/ERTMS/033281).
It should be noted that the demonstration of compatibility between the rolling stock and infrastructure with respect to physical dimensions is not detailed in this standard.
Under the Interoperability Directive, two stages of compatibility are defined. The first stage is for authorization for putting into service against generic limits, and the second stage - for putting into use, when specific limits for compatibility with TDS are addressed which are outside the general limits or non interoperable TDS are installed on the line over which the RST will run.
Compatibility requirements for non-mainline or isolated light rail/metro type lines are addressed in one stage of authorization.
This European Standard is not generally applicable to those combinations of rolling stock, traction power supply and train detection system which were accepted as compatible prior to the issue of this European Standard. However, as far as is reasonably practicable, this European Standard may be applied to modifications of rolling stock, traction power supply or train detection systems which may affect compatibility.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50329:2003/A1:2010(Amendment)
Railway applications - Fixed installations - Traction transformers
EN 50329:2003/A1:2010

Covers specific characteristics of traction transformers as defined in 1.3.1, used in traction substation or along the track for the supply of power to a.c. and d.c. traction systems or to provide power to auxiliary services. Traction transformers are either: single-phase traction transformers; - single-, three or poly-phase rectifier-transformers or converter/inverter-transformers for d.c. or a.c. contact line; single phase auto-transformers for traction power supply; single- or three phase auxiliary transformers at traction supply voltage.

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50329:2003(Main)
Railway applications - Fixed installations - Traction transformers
EN 50329:2003

This European Standard covers specific characteristics of traction transformers as defined in 1.3.1, used in traction substation or along the track for the supply of power to a.c. and d.c. traction systems or to provide power to auxiliary services. Traction transformers are either
-   single-phase traction transformers,
-   single-, three- or poly-phase rectifier-transformers or converter/inverter-transformers for d.c. or a.c. contact line,
-   single phase auto-transformers for traction power supply,
-   single- or three-phase auxiliary transformers at traction supply voltage.
Transformers feeding a.c. contact lines are covered by EN 60076. Dry-type transformers are covered by HD 464. These standards are valid with the additional requirements given in this document.
For transformers feeding contact lines through static converters EN 61378-1 may assist, but modified or additional requirements are given in this document.
NOTE   Transformers mounted on-board traction vehicles are covered by EN 60310 and are excluded from the scope of this document.
Electromagnetic compatibility is ruled by EN 60076-1 which states that a transformer may be considered a passive element in this respect.
Some accessories however are subject to EMC requirements and shall comply with EN 50121-5.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50238-1:2021(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 1: General
EN 50238-1:2019

This European Standard describes a process to demonstrate compatibility between Rolling Stock (RST) and Train Detection Systems (TDS) for specific routes. It references the methods of measurement of interference currents and magnetic fields, the methods of measurement of the susceptibility of train detection systems and the characterization of traction power supplies. The process described in this standard is equally applicable to mainline, lightrail and metro type railways.
The basic parameters of compatibility for mainline railways are covered by the ERA Interface document (ERA/ERTMS/033281).
It should be noted that the demonstration of compatibility between the rolling stock and infrastructure with respect to physical dimensions is not detailed in this standard.
Under the Interoperability Directive, two stages of compatibility are defined. The first stage is for authorization for putting into service against generic limits, and the second stage - for putting into use, when specific limits for compatibility with TDS are addressed which are outside the general limits or non interoperable TDS are installed on the line over which the RST will run.
Compatibility requirements for non-mainline or isolated light rail/metro type lines are addressed in one stage of authorization.
This European Standard is not generally applicable to those combinations of rolling stock, traction power supply and train detection system which were accepted as compatible prior to the issue of this European Standard. However, as far as is reasonably practicable, this European Standard may be applied to modifications of rolling stock, traction power supply or train detection systems which may affect compatibility.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50329:2003/A1:2010(Amendment)
Railway applications - Fixed installations - Traction transformers
EN 50329:2003/A1:2010

Covers specific characteristics of traction transformers as defined in 1.3.1, used in traction substation or along the track for the supply of power to a.c. and d.c. traction systems or to provide power to auxiliary services. Traction transformers are either: single-phase traction transformers; - single-, three or poly-phase rectifier-transformers or converter/inverter-transformers for d.c. or a.c. contact line; single phase auto-transformers for traction power supply; single- or three phase auxiliary transformers at traction supply voltage.

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50329:2003(Main)
Railway applications - Fixed installations - Traction transformers
EN 50329:2003

This European Standard covers specific characteristics of traction transformers as defined in 1.3.1, used in traction substation or along the track for the supply of power to a.c. and d.c. traction systems or to provide power to auxiliary services. Traction transformers are either
-   single-phase traction transformers,
-   single-, three- or poly-phase rectifier-transformers or converter/inverter-transformers for d.c. or a.c. contact line,
-   single phase auto-transformers for traction power supply,
-   single- or three-phase auxiliary transformers at traction supply voltage.
Transformers feeding a.c. contact lines are covered by EN 60076. Dry-type transformers are covered by HD 464. These standards are valid with the additional requirements given in this document.
For transformers feeding contact lines through static converters EN 61378-1 may assist, but modified or additional requirements are given in this document.
NOTE   Transformers mounted on-board traction vehicles are covered by EN 60310 and are excluded from the scope of this document.
Electromagnetic compatibility is ruled by EN 60076-1 which states that a transformer may be considered a passive element in this respect.
Some accessories however are subject to EMC requirements and shall comply with EN 50121-5.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-4:2023(Main)
Extenders - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:2022)
EN ISO 3262-4:2023

This document specifies requirements and corresponding methods of test for whiting.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63044-4:2021/AC:2023(Corrigendum)
Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS
EN IEC 63044-4:2021/AC:2023-07
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day