SIST EN 12390-13:2021
(Main)Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
This document specifies the method for the determination of the secant modulus of elasticity in compression of hardened concrete on test specimens which can be cast or taken from a structure.
The test method allows the determination of two secant moduli of elasticity: the initial modulus, EC,0 measured at first loading and the stabilized modulus, EC,S measured after three loading cycles.
Two different test methods are given. The first (Method A) is for determination of both initial and stabilized moduli, the second (Method B) is for determination of stabilized modulus only.
Prüfung von Festbeton - Teil 13: Bestimmung des Elastizitätsmoduls unter Druckbelastung (Sekantenmodul)
Dieses Dokument legt das Verfahren zur Bestimmung des Elastizitätsmoduls von Festbeton als Sekantenmodul unter Druckbelastung unter Verwendung von in Form hergestellten oder aus Bauwerken entnommenen Probekörpern fest.
Dieses Prüfverfahren ermöglicht die Bestimmung von zwei Elastizitätsmoduln: dem anfänglichen Modul EC,0, der bei der ersten Belastung, und dem stabilisierten Modul EC,S, der nach drei Belastungszyklen gemessen wird.
Es werden zwei unterschiedliche Prüfverfahren angegeben. Das erste Verfahren (Verfahren A) dient zur Bestimmung sowohl des anfänglichen als auch des stabilisierten Elastizitätsmoduls, während das zweite Verfahren (Verfahren B) nur zur Bestimmung des stabilisierten Elastizitätsmoduls dient.
Essais pour béton durci - Partie 13 : Détermination du module sécant d’élasticité en compression
Le présent document spécifie la méthode de détermination du module sécant d’élasticité en compression du béton durci, en utilisant des éprouvettes pouvant avoir été moulées ou prélevées dans une structure.
La méthode d’essai permet de déterminer deux modules sécants d’élasticité : le module initial, EC,0, mesuré lors de la première application de la charge et le module stabilisé, EC,S, mesuré après trois cycles de chargement.
Deux méthodes d’essai différentes sont indiquées. La première (méthode A) porte sur la détermination à la fois du module initial et du module stabilisé, la seconde (méthode B) concerne la détermination du module stabilisé uniquement.
Preskušanje strjenega betona - 13. del: Določanje sekantnega modula elastičnosti pri tlačni obremenitvi
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12390-13:2021
01-september-2021
Nadomešča:
SIST EN 12390-13:2014
Preskušanje strjenega betona - 13. del: Določanje sekantnega modula elastičnosti
pri tlačni obremenitvi
Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in
compression
Prüfung von Festbeton - Teil 13: Bestimmung des Elastizitätsmoduls unter
Druckbelastung (Sekantenmodul)
Essais pour béton durci - Partie 13 : Détermination du module sécant d’élasticité en
compression
Ta slovenski standard je istoveten z: EN 12390-13:2021
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 12390-13:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12390-13:2021
---------------------- Page: 2 ----------------------
SIST EN 12390-13:2021
EN 12390-13
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2021
EUROPÄISCHE NORM
ICS 91.100.30 Supersedes EN 12390-13:2013
English Version
Testing hardened concrete - Part 13: Determination of
secant modulus of elasticity in compression
Essais pour béton durci - Partie 13 : Détermination du Prüfung von Festbeton - Teil 13: Bestimmung des
module sécant d'élasticité en compression Elastizitätsmoduls unter Druckbelastung
(Sekantenmodul)
This European Standard was approved by CEN on 7 June 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12390-13:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12390-13:2021
EN 12390-13:2021 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions, symbols and abbrivations . 5
3.1 Terms and definitions . 5
3.2 Symbols and abbreviations . 6
4 Principle . 7
5 Apparatus . 7
5.1 Test machine . 7
5.2 Instrumentation . 7
5.3 Gauge length. 8
6 Test specimens . 8
6.1 Shape and dimensions of specimens .
...
SLOVENSKI STANDARD
oSIST prEN 12390-13:2019
01-november-2019
Preskušanje strjenega betona - 13. del: Določanje sekantnega modula elastičnosti
pri tlačni obremenitvi
Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in
compression
Prüfung von Festbeton - Teil 13: Bestimmung des Elastizitätsmoduls unter
Druckbelastung (Sekantenmodul)
Essais pour béton durci - Partie 13 : Détermination du module sécant d’élasticité en
compression
Ta slovenski standard je istoveten z: prEN 12390-13
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
oSIST prEN 12390-13:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12390-13:2019
---------------------- Page: 2 ----------------------
oSIST prEN 12390-13:2019
DRAFT
EUROPEAN STANDARD
prEN 12390-13
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2019
ICS 91.100.30 Will supersede EN 12390-13:2013
English Version
Testing hardened concrete - Part 13: Determination of
secant modulus of elasticity in compression
Essais pour béton durci - Partie 13: Détermination du Prüfung von Festbeton - Teil 13: Bestimmung des
module sécant d¿élasticité en compression Elastizitätsmoduls unter Druckbelastung
(Sekantenmodul)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 104.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12390-13:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12390-13:2019
prEN 12390-13:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms, definitions, symbols and abbrivations . 4
3.1 Terms and definitions . 4
3.2 Symbols and abbreviations . 5
4 Principle . 6
5 Apparatus . 6
5.1 Test machine . 6
5.2 Instrumentation . 6
5.3 Gauge length.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.