Domestic furniture - Beds and mattresses - Methods of measurement and recommended tolerances

This European Standard describes methods of measurement for the determination of the dimensions of all types of domestic mattresses, bed frames, divans and bed bases intended for adult size. However, it does not apply to air beds and water beds nor to mattress pads that are placed on top of the main support mattress. It also includes recommended tolerances based on any nominal dimension in order to ensure the correct fit between the bed components.

Wohnmöbel - Betten und Matratzen - Meßverfahren und Toleranzempfehlungen

Diese Europäische Norm beschreibt Prüfverfahren zur Bestimmung der Maße aller Arten von Matratzen, Bettrahmen, Polsterliegen und Bettböden für Erwachsenen-Betten. Sie gilt jedoch nicht für Luftmatratzen und Wasserbetten oder Auflagen, die auf die Hauptmatratze aufgelegt werden. Die Norm enthält ferner Toleranzempfehlungen, die auf die jeweiligen Nennmaße bezogen sind, so daß die verschiedenen Bett-Einzelteile beim Zusammenbau einwandfrei zusammenpassen.

Ameublement domestique - Lits et matelas - Méthodes de mesure et tolérances recommandées

Cette norme européenne décrit les méthodes de mesure pour la détermination des dimensions de tous les types de matelas, lits, divans, sommiers destinés à la taille adulte. Elle ne s'applique pas, cependant, aux matelas à air et à eau, ni au sur-matelas placé au-dessus d'un matelas support principal. Elle comprend aussi les tolérances recommandées, en partant de toute dimension nominale, en vue d'assurer un assemblage correct des différents éléments d'une literie.

Pohištvo za domačo uporabo - Postelje in posteljni vložki - Metode merjenja in priporočene tolerance

General Information

Status
Published
Publication Date
31-Mar-1996
ICS
97.140 - Furniture
Technical Committee
POH - Furniture
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Apr-1996
Due Date
01-Apr-1996
Completion Date
01-Apr-1996
Ref Project
EN 1334:1996 - Domestic furniture - Beds and mattresses - Methods of measurement and recommended tolerances

Overview - EN 1334:1996 (Beds and mattresses measurement)

EN 1334:1996 is a CEN European Standard that specifies methods of measurement and recommended tolerances for domestic beds and mattresses intended for adult sizes. The standard covers the determination of dimensions for mattresses, bed frames, divans and bed bases, and provides tolerance values based on nominal dimensions to ensure correct fit and interchangeability of bed components. It explicitly excludes air beds, water beds and mattress pads placed on top of the main support mattress.

Key topics and requirements

  • Scope and applicability: Measurement rules apply to all types of domestic mattresses and bed-support components for adults; excludes air/water beds and mattress pads.
  • Methods of measurement: Standardised procedures for determining linear dimensions of mattresses, bed frames, divans and bases (ensuring repeatable, comparable results).
  • Nominal dimensions and tolerances: Recommended tolerance bands tied to the nominal dimension to manage manufacturing variability and ensure component fit.
  • Component fit and interchangeability: Focus on dimensional compatibility between mattress and support structures to avoid poor fit, overhang, or gaps.
  • Language and classification: Identified under furniture ICS codes (e.g., ICS 97.140), and published as a European (CEN) document.

(Note: EN 1334:1996 defines measurement and tolerance principles; consult the full standard for exact measurement procedures and numerical tolerances.)

Applications - who uses EN 1334:1996

  • Bed and mattress manufacturers - to set production tolerances and quality-control criteria.
  • Furniture designers and engineers - to design components that fit standard mattress sizes and supports.
  • Retailers and distributors - to verify product dimensions and ensure advertised sizes meet expected tolerances.
  • Testing laboratories and quality inspectors - to perform repeatable dimensional checks and certify compliance.
  • Procurement and specification writers - to write clear purchase specifications for contract bedding (hotels, healthcare).
  • Aftermarket and replacement part suppliers - to ensure replacement bases, slats or frames match mattress dimensions.

Related standards and practical notes

  • EN 1334 complements other European furniture standards addressing safety, performance and testing. For comprehensive compliance, pair EN 1334 dimensional rules with applicable furniture safety and performance standards and national regulations.
  • Using EN 1334 helps improve product compatibility, reduce returns, and support international trade by harmonising mattress and bed component dimensions across Europe.

Keywords: EN 1334:1996, domestic furniture standard, beds and mattresses measurement, mattress tolerances, bed frame dimensions, CEN standard, nominal dimensions, mattress sizing, component fit.

Frequently Asked Questions

SIST EN 1334:1996 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Domestic furniture - Beds and mattresses - Methods of measurement and recommended tolerances". This standard covers: This European Standard describes methods of measurement for the determination of the dimensions of all types of domestic mattresses, bed frames, divans and bed bases intended for adult size. However, it does not apply to air beds and water beds nor to mattress pads that are placed on top of the main support mattress. It also includes recommended tolerances based on any nominal dimension in order to ensure the correct fit between the bed components.

This European Standard describes methods of measurement for the determination of the dimensions of all types of domestic mattresses, bed frames, divans and bed bases intended for adult size. However, it does not apply to air beds and water beds nor to mattress pads that are placed on top of the main support mattress. It also includes recommended tolerances based on any nominal dimension in order to ensure the correct fit between the bed components.

SIST EN 1334:1996 is classified under the following ICS (International Classification for Standards) categories: 97.140 - Furniture. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 1334:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wohnmöbel - Betten und Matratzen - Meßverfahren und ToleranzempfehlungenAmeublement domestique - Lits et matelas - Méthodes de mesure et tolérances recommandéesDomestic furniture - Beds and mattresses - Methods of measurement a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...