iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60240-1:2001

(Main)

Characteristics of electric infra-red emitters for industrial heating -- Part 1: Short wave infra-red emitters

Characteristics of electric infra-red emitters for industrial heating -- Part 1: Short wave infra-red emitters

This part deals with bulb reflector infra-red lamps and tubular emitters.

Eigenschaften von elektrischen Infrarotstrahlen für Heizzwecke -- Teil 1: Kurzwellen-Infrarotstrahler

Caractéristiques des émetteurs électriques d'infrarouge pour chauffage industriel -- Partie 1: Emetteurs d'infrarouge court

Cette partie est applicable aux lampes infrarouges à réflecteur incorporé ainsi qu'aux émetteurs tubulaires.

Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters

General Information

Status
Published
Publication Date
31-Aug-2001
ICS
97.100.10 - Electric heaters
Technical Committee
I09 - Imaginarni 09
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2001
Due Date
01-Sep-2001
Completion Date
01-Sep-2001
Ref Project
EN 60240-1:1994 - Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters

Buy Standard

EN 60240-1:2001EN 60240-1:2001
PreviousNext
Standard
EN 60240-1:2001
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60240-1:2001
01-september-2001
Characteristics of electric infra-red emitters for industrial heating - Part 1: Short
wave infra-red emitters
Characteristics of electric infra-red emitters for industrial heating -- Part 1: Short wave
infra-red emitters
Eigenschaften von elektrischen Infrarotstrahlen für Heizzwecke -- Teil 1: Kurzwellen-
Infrarotstrahler
Caractéristiques des émetteurs électriques d'infrarouge pour chauffage industriel --
Partie 1: Emetteurs d'infrarouge court
Ta slovenski standard je istoveten z: EN 60240-1:1994
ICS:
97.100.10 (OHNWULþQLJUHOQLNL Electric heaters
SIST EN 60240-1:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60240-1:2001

---------------------- Page: 2 ----------------------

SIST EN 60240-1:2001

---------------------- Page: 3 ----------------------

SIS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60519-12:2018(Main)
Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infrared electroheating
EN IEC 60519-12:2018

IEC 60519 specifies safety requirements for industrial electroheating equipment and installations in which infrared radiation - usually generated by infrared emitters - is significantly dominating over heat convection or heat conduction as means of energy transfer to the workload. A further limitation of the scope is that the infrared emitters have a maximum spectral emission at longer wavelengths than 780 nm in air or vacuum, and are emitting wideband continuous spectra such as by thermal radiation or high pressure arcs. IEC 60519-1:2015 defines infrared as radiation within the frequency range between 400 THz and 300 GHz. This corresponds to a wavelength range between 780 nm and 10 μm in vacuum. Industrial infrared heating commonly uses thermal infrared sources with rated temperatures between 500 °C and 3 000 °C; the emitted radiation from these sources dominates in the wavelength range between 780 nm and 10 μm. Since substantial emission of thermal emitters can extend either to wavelengths below 780 nm or above 3 000 nm, the safety aspects of emitted visible light and emission at wavelengths longer than 3 000 nm are also considered in this document. This standard is not applicable to:  - infrared installations with lasers or light-emitting diodes (LEDs) as main sources - they are covered by IEC 62471:2006 and IEC 60825-1:2014;  - appliances for use by the general public;  - appliances for laboratory use - they are covered by IEC 61010-1:2010;  - electroheating installations where resistance heated bare wires, tubes or bars are used as heating elements, and infrared radiation is not a dominant side effect of the intended use, covered by IEC 60519-2:2006;  - infrared heating equipment with a nominal combined electrical power of the infrared emitters of less than 250 W;  - handheld infrared equipment. Industrial infrared electroheating equipment under the scope of this standard typically uses the Joule effect for the conversion of electric energy into infrared radiation by one or several sources. Radiation is then emitted from one or several elements onto the material to be treated. Such infrared heating elements are in particular:  - thermal infrared emitters in the form of tubular, plate-like or otherwise shaped ceramics with a resistive element inside;  - infrared quartz glass tube or halogen lamp emitters with a hot filament as a source;  - non insulated elements made from molybdenum disilicide, silicon carbide, graphite, ironchromium- aluminium alloys, refractory metals or comparable materials;  - wide-spectrum arc lamps.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60335-2-53:2012/A1:2023(Amendment)
Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and infrared cabins (IEC 60335-2-53:2011/A1:2017 + COR1:2017)
EN 60335-2-53:2011/A1:2023

The contents of the corrigendum of March 2017 have been included in this copy.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60335-2-53:2012/A11:2023(Amendment)
Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and infrared cabins
EN 60335-2-53:2011/A11:2023

IEC 60335-2-53:2011 deals with the safety of electric sauna heating appliances and infrared emitting units having a rated power input not exceeding 20 kW, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. The appliances covered by this standard are intended for use in the home and in public saunas located in blocks of flats, hotels and similar locations. This standard also deals with the safety of electric sauna heating appliances provided with a humidifier unit, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. The room air is humidified by evaporating or atomising water. This fourth edition cancels and replaces the third edition published in 2002 and its Amendment 1 (2007). It constitutes a technical revision. The principal changes in this edition as compared with the third edition of IEC 60335-2-53 are as follows:  - the scope is changed to cover infrared cabins;  - additional requirements for recessed sauna heaters are added;  - requirements of electronic interlocks are added (22.108).  The attention of National Committees is drawn to the fact that equipment organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication.   This publication is to be read in conjunction with IEC 60335-1:2010.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60335-2-53:2012/A2:2023(Amendment)
Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and infrared cabins (IEC 60335-2-53:2011/A2:2021)
EN 60335-2-53:2011/A2:2023

This standard deals with the safety of electric sauna heating appliances and infrared emitting units having a rated power input not exceeding 20 kW, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60335-2-81:2023(Main)
Household and similar electrical appliances - Safety -- Part 2-81: Particular requirements for foot warmers and heating mats (IEC 60335-2-81:2015)
EN IEC 60335-2-81:2023

IEC 60335-2-81:2015 deals with the safety of electric foot warmers and heating mats for household and similar purposes, their rated voltage being not more than 250 V. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction. It also does not take into account children playing with the appliance. It was established on the basis of the fifth edition (2010) of that standard. This third edition cancels and replaces the second edition published in 2002, its Amendment 1 (2007) and its Amendment 2 (2011). It constitutes a technical revision. The principal changes in this edition as compared with the second edition of IEC 60335-2-81 are as follows (minor changes are not listed):
- requirements for washable appliances (5.3, 7.1, 7.6, 7.12);
- requirements for controls in flexible cords (15.1.1, 24.2) and requirements for appliance inlets (22.105, 24.1.5, 29.1.3). The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this standard be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of its publication.
Key words: Foot warmer, heating element, heating mat

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60335-2-81:2023/A2:2023(Amendment)
Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats (IEC 60335-2-81:2015/A2:2020)
EN IEC 60335-2-81:2023/A2:2023

This European Standard deals with the safety of electric foot warmers and heating mats for household and similar purposes, their rated voltage being not more than 250 V.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60335-2-81:2023/A1:2023(Amendment)
Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats (IEC 60335-2-81:2015/A1:2017)
EN IEC 60335-2-81:2023/A1:2023

NEXT ACTION: TB ACTION by 2021-01-31 (TC to send text after drop of voting results - D167/C064)
HAS ASSESSMENT BY 2019-09-27
2019-01-23 CV: blocked until ratification of pr64193 is completed

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12098-3:2023(Main)
Energy Performance of Buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8
EN 12098-3:2022

This European Standard applies to electronic control equipment for heating systems with direct electrical emission, which have an integrated outside compensated function and or optimum start/stop function.
This control equipment controls the distribution and/or the generation of heat in relation to the outside temperature and time and other reference variables.
This European Standard also covers controllers that contain an integrated optimum start or an optimum start-stop control function. The controller modulates heating or control modes of electronic individual zone or emitter control equipment.
Safety requirements on heating systems remain unaffected by this standard. The dynamic behaviour of the local thermostats, sensors, or actuators is not covered in this standard.
A multi-distribution and/or multi-generation system needs a coordinated solution to prevent undesired interaction and is not part of this standard.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.
NOTE 1   In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2   The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60335-2-30:2010/A2:2022(Amendment)
Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters
EN 60335-2-30:2009/A2:2022

This European Standard deals with the safety of electric room heaters for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. This standard also deals with the safety of electric heaters intended for the heating of driver and passenger compartments of motor vehicles when they are stationary, their rated voltage being not more than 250 V.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60335-2-30:2010/A13:2022(Amendment)
Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters
EN 60335-2-30:2009/A13:2022

2021-06-03: This prAD includes common mods to EN 60335-2-30:2009/A2 (PR=74100)

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day