97.100.10 - Electric heaters

IEC 60675-3:2020 applies to electric direct-acting room heaters.
This document defines performance characteristics related to the radiant effect and specifies methods for measuring the radiation efficiency for the information of users.
This document is used to measure the radiation efficiency of direct-acting room heaters.
This International Standard is to be used in conjunction with IEC 60675:1994, IEC 60675:1994/AMD1:1998 and IEC 60675:1994/AMD2:2018.

IEC 60675-2:2020 applies to electric direct-acting room heaters.
This document defines performance characteristics related to the radiant effect and specifies methods for measuring the radiant factor for the information of users.
This document is used to measure the radiant factor of direct-acting room heaters.
This International Standard is to be used in conjunction with IEC 60675:1994, IEC 60675:1994/AMD1:1998 and IEC 60675:1994/AMD2:2018.

2018-09-14 CV: Positive assessment expected (info from NAC) but not yet uploaded on HAS Livelink folder -- BT doc for publication awaiting official assessment
2018-08-12 CV: New assessment requested

This clause of part 1 is applicable except as follows.
Addition:
This standard applies to open outlet, single point of use, electric instantaneous water heaters intended for household or similar use, for showering purposes without downstream mixing.
This standard only specifies tests for the assessment of energy efficiency.
This standard does not apply to electrical instantaneous water heaters covered by other parts of this series of standards.

This clause of Part 1 is applicable with the following exception:
This European Standard applies to electrical instantaneous water heaters designed to operate as multifunctional appliances with electric rated power >2 kW.
This European Standard specifies tests for the assessment of the performance.

This European Standard applies to electric instantaneous water heaters for domestic hot water heating for household and similar applications, which show both of the following characteristics:
–   fulfilling at least one load pattern from Annex A;
–   heating up to temperatures below the boiling temperature.
This European Standard specifies terms, definitions and measurement methods for the assessment of energy efficiency.
This European Standard does not take into account requirements regarding t...view more

This European Standard applies to electrical underfloor heating of dwellings and all other buildings whose use corresponds to dwellings or is at least similar, having a maximum load bearing in use of 4 kN/m².  This European Standard defines the main characteristics of electrical underfloor heating and establishes the method of testing of these characteristics as information for the user. This European Standard does not deal with: -   installation and safety requirements; DIN VDE 0100-723.

EN-IEC 60335-2-71 deals with the safety of all kinds of electrical heating appliances used for livestock rearing and breeding, such as: heat-radiating appliances, electrical sittinghens, incubators, chicken breeding units and heating plates for animals, the rated voltage of the appliances being not more than 250 V for single-phase appliances and 480 V for other appliances.

IEC 60335-2-71:2018 deals with the safety of all kinds of electrical heating appliances used for livestock rearing and breeding, such as: heat-radiating appliances, electrical sitting-hens, incubators, chicken breeding units and heating plates for animals, the rated voltage of the appliances being not more than 250 V for single-phase appliances and 480 V for other appliances. This standard applies to heating appliances used for livestock rearing and breeding that include an electrical motor. Thi...view more

Deals with the safety of electric thermal-storage room heaters intended to heat the room in which they are located, their rated voltage being not more than 250 V for single phase and 480 V for other appliances.

This standard applies to electric direct-acting room heaters. They may be portable, stationary, fixed, or built-in.
It does not apply to:
- thermal-storage room heaters (EN 60531);
- heating appliances incorporated in the building structure;
- central heating systems;
- heaters connected to an air duct;
- wall-paper, carpets or drapes incorporating flexible heating elements;
- sauna stoves.
This standard defines the main performance characteristics of direct-acting room heaters and ...view more

This standard spplies to electric storage heaters having a daily operating cycle and intended to heat the room in which they are located.

2019-01-16 CV: LVD assessment  uploaded on HAS tool on 2018-12-29 (deadline: 2019-02-04). If positively assessed, project can proceed to BT (1 month consultation) for the approval of the new Annex ZZ
2017-05-02: D156/C084 - Ratified standards not being made available.
2017-09-07: publication pending due to missing Annex ZZ

IEC 60335-2-96:2019 is available as IEC 60335-2-96:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60335-2-96:2019 deals with the safety of flexible sheet heating elements intended to be incorporated into floors and walls below 1,2 m and above 2,3 m and in ceilings, their rated voltage being not more than 250 V for single-phase installations and 480 V for other installations.
Flexible s...view more

IEC TS 63070:2019 is applicable to ultrasonic equipment designed for the medical field of application. It covers both diagnostic and therapeutic (physiotherapy and HITU) equipment.
This document describes transducer evaluation by the infrared imaging technique using a split TMM-phantom for qualitative and quantitative estimation of temperature distributions in tissue-mimicking material, resulting from absorption of ultrasound and from heating of the transducer itself.
This document also descri...view more

This standard applies to electric direct -acting room heaters. They may be portable,
stationary, fixed, or built-in.
It does not apply to:
— thermal-storage room heaters (IEC 531);
- heating appliances incorporated in the building structure;
- central heating systems;
— heaters connected to an air duct;
- wall-paper, carpets or drapes incorporating flexible heating elements.
This standard defines the main performance characteristics of direct-acting room
heaters and specifies methods fo...view more

IEC 60519 specifies safety requirements for industrial electroheating equipment and installations in which infrared radiation - usually generated by infrared emitters - is significantly dominating over heat convection or heat conduction as means of energy transfer to the workload. A further limitation of the scope is that the infrared emitters have a maximum spectral emission at longer wavelengths than 780 nm in air or vacuum, and are emitting wideband continuous spectra such as by thermal radia...view more