SIST EN 4644-133:2012

SLOVENSKI STANDARD
01-januar-2012
$HURQDYWLND.RQHNWRUSUDYRNRWQLHOHNWULþQLLQRSWLþQLPRGXODUQLSUDYRNRWQL
NRQWDNWQLYORåNLVWDOQDGHORYQDWHPSHUDWXUDƒ&DOLƒ&GHO)LNVQL
NRQHNWRUMLYHOLNRVWL]DSULNOMXþHYDQMHQDSUDYH6WDQGDUG]DL]GHOHN
Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular
inserts, operating temperature 175 °C (or 125 °C) continuous - Part 133: Size 3
receptacle for rack and panel application - Product standard
Luft- und Raumfahrt - Elektrische und optische Rechtecksteckverbinder, modular,
rechteckige Kontakteinsätze, Dauerbetriebstemperatur 175 °C (oder 125 °C) konstant -
Teil 133: Fester Steckverbinder, Größe 3, Geräteeinschub - Produktnorm
Série aérospatiale - Connecteur, électrique et optique, rectangulaire, modulaire, à inserts
rectangulaires, température de fonctionnement 175 °C (ou 125 °C) continu - Partie 133:
Embase, taille 3, pour applications rackables - Norme de produit
Ta slovenski standard je istoveten z: EN 4644-133:2011
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 4644-133
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2011
ICS 49.060; 49.090
English Version
Aerospace series - Connector, electrical and optical,
rectangular, modular, rectangular inserts, operating temperature
175 °C (or 125 °C) continuous - Part 133: Size 3 receptacle for
rack and panel application - Product standard
Série aérospatiale - Connecteur, électrique et optique,
Luft- und Raumfahrt - Elektrische und optische
rectangulaire, modulaire, à inserts rectangulaires, Rechtecksteckverbinder, modular, rechteckige
température de fonctionnement 175 °C (ou 125 °C) continu Kontakteinsätze, Dauerbetriebstemperatur 175 °C (oder
- Partie 133: Embase, taille 3, pour applications rackables - 125 °C) konstant - Teil 133: Fester Steckverbinder, Größe
Norme de produit 3, Geräteeinschub - Produktnorm
This European Standard was approved by CEN on 22 July 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4644-133:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Required characteristics .4
4.1 Dimensions and recommended panel cut out .4
4.2 Mass .7
4.3 Panel cut-out coding .7
5 Designation .9
6 Marking .9
7 Technical specification .9

Foreword
This document (EN 4644-133:2011) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorseme
...