SIST EN 2480:2026

SLOVENSKI STANDARD
01-januar-2026
Aeronavtika - Jeklo FE-PL2108 (36NiCrMo16) - 1250 MPa ≤ Rm ≤ 1400 MPa - Palice
- De ≤ 75 mm
Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa -
Bars - De ≤ 75 mm
Luft- und Raumfahrt - Stahl FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa -
Stangen - De ≤ 75 mm
Série aérospatiale - Acier FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa -
Barres - De ≤ 75 mm
Ta slovenski standard je istoveten z: EN 2480:2025
ICS:
49.025.10 Jekla Steels
77.140.60 Jeklene palice in drogovi Steel bars and rods
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 2480
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2025
EUROPÄISCHE NORM
ICS 49.025.10 Supersedes EN 2480:2008
English Version
Aerospace series - Steel 36NiCrMo16 (1.6773) - 1 250 MPa
≤ Rm ≤ 1 400 MPa - Bars - De ≤ 75 mm
Série aérospatiale - Acier 36NiCrMo16 (1.6773) - 1 250 Luft- und Raumfahrt - Stahl 36NiCrMo16 (1.6773) - 1
MPa ≤ Rm ≤ 1 400 MPa - Barres - De ≤ 75 mm 250 MPa ≤ Rm ≤ 1 400 MPa - Stangen - De ≤ 75 mm
This European Standard was approved by CEN on 5 October 2025.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2480:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

European foreword
This document (EN 2480:2025) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by May 2026, and conflicting national standards shall be withdrawn at
the latest by May 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 2480:2008.
— overall editorial improvements to comply with the EN 4500 series;
— addition of a bibliography;
— update of Clause 2: EN 4258 and EN 4500-005 were moved to the bibliography;
— addition of a designation and title to the table;
— addition of line 4.3 “Further intended processing” and line 5.2 “Dimensional standard” as per
EN 4500-001;
— addition of information on line 20 “Impact strength”: the type of resilience (KV) and the unit (J)
were not specified. Technical modifications regarding the temperature of the creep tests.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
follow
...