SIST EN 50131-2-7-3:2012/IS1:2014
Alarm systems - Intrusion and hold-up systems -- Part 2-7-3: Intrusion detectors - Glass break detectors (active)
Alarm systems - Intrusion and hold-up systems -- Part 2-7-3: Intrusion detectors - Glass break detectors (active)
This European standard is for active surface mounted glass break detectors installed in buildings and provides for security Grades 1 to 4 (see EN 50131-1), specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV (see EN 50130-5). This European standard does not include requirements for active surface mounted glass break detectors intended for use outdoors. A detector shall fulfil all the requirements of the specified Grade. Functions additional to the mandatory functions specified in this standard may be included in the detector, providing they do not adversely influence the correct operation of the mandatory functions. This European standard does not apply to system interconnections.
Alarmanlagen - Einbruch- und Überfallmeldeanlagen -- Teil 2-7-3: Einbruchmelder - Glasbruchmelder (Aktiv)
Systèmes d’alarme - Systèmes d'alarme contre l’intrusion et les hold-up -- Partie 2-7-3: Détecteurs d'intrusion - Détecteurs bris de glace (actifs)
La présente Norme Européenne concerne les détecteurs de bris de glace actifs montés en surface installés dans les bâtiments, décrit les détecteurs câblés ou sans fil spécifiques ou non des Grades de protection 1 à 4 (voir l'EN 50131-1) et utilise les classes d’environnement I à IV (voir l'EN 50130-5). Elle ne traite pas des exigences des détecteurs de bris de glace actifs montés en surface destinés à une utilisation à l'extérieur. Un détecteur doit satisfaire à toutes les exigences du Grade spécifié. Des fonctions supplémentaires aux fonctions obligatoires spécifiées dans la présente norme peuvent être incluses dans le détecteur, à condition qu'elles ne nuisent pas au bon fonctionnement des fonctions obligatoires. La présente Norme Européenne ne s'applique pas aux interconnexions de systèmes.
Alarmni sistemi - Sistemi za javljanje vloma in ropa - 2-7-3. del: Zahteve za javljalnike vloma - Javljalniki loma stekla (aktivni) - Dopolnilo IS1
Ta evropski standard se uporablja za aktivne javljalnike loma stekla, nameščene na površino zgradb, določa varnostne razrede od 1 do 4 in lastnosti specifičnih in nespecifičnih kabelskih ali brezžičnih javljalnikov ter uporablja okoljske razrede od I do IV. Ta evropski standard ne vključuje zahtev za aktivne javljalnike loma stekla, nameščene na površino, ki so namenjeni za uporabo na prostem. Javljalnik mora izpolnjevati vse zahteve posameznega razreda. Poleg obveznih funkcij, ki so opredeljene v tem standardu, ima lahko javljalnik tudi dodatne funkcije, pri čemer te ne smejo negativno vplivati na pravilno delovanje obveznih funkcij. Ta evropski standard se ne uporablja za medsebojne povezave sistemov.
General Information
- Status
- Published
- Publication Date
- 11-Mar-2014
- Technical Committee
- EAL - Alarm systems
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 10-Mar-2014
- Due Date
- 15-May-2014
- Completion Date
- 12-Mar-2014
Relations
- Effective Date
- 01-Apr-2014
- Effective Date
- 28-Jan-2023
Overview
EN 50131-2-7-3:2012/IS1:2014 is a CLC/CENELEC European standard for active surface-mounted glass break detectors used in building alarm systems. It specifies performance and test requirements to support security Grades 1–4 (per EN 50131-1) and covers both wired and wireless (specific or non-specific) devices across environmental Classes I–IV (per EN 50130-5). This standard applies to indoor surface-mounted detectors only and does not cover outdoor glass break detectors or system interconnections.
Key topics and technical requirements
- Scope and applicability: Active surface-mounted glass break detectors for installation in buildings; not for outdoor use.
- Security Grade compliance: Devices must meet all requirements of the declared Grade (1–4) as defined by EN 50131-1.
- Environmental classes: Devices are assessed to EN 50130-5 environmental Classes I–IV to ensure reliable operation in specified conditions.
- Wiring options: Supports specific or non-specific wired and wire-free detectors.
- Mandatory vs. optional functions: Additional functions may be included provided they do not adversely affect mandatory functions.
- Test magnet specification (IS1 / Annex C): Interpretation Sheet permits using a NeoDym (NdFeB N40) test magnet instead of AlNiCo for reproducible interference testing. Key magnet parameters referenced:
- Remanence: B_r min 1 275 mT ±2%
- Energy product: (BH)max 310 kJ/m³ ±3%
- Polarization working point: 0.835 T ±2%
- Calibration and measurements follow EN/IEC magnetic material standards (EN 60404-5, EN 60404-14, IEC 60404-8-1).
- Calibration recommendation: Use accredited test houses for magnet adjustment and calibration to ensure reproducible test results.
Applications and users
Practical applications include interior protection of:
- Commercial windows and shopfronts
- Office and retail premises
- Museums, banks, and showrooms
- Residential properties where surface-mounted active glass-break protection is required
Key users:
- Security product manufacturers and R&D teams
- Test houses and certification bodies
- Alarm system designers and integrators
- Installers and risk-assessment consultants
Related standards
- EN 50131-1 - System requirements and security Grades
- EN 50130-5 - Environmental test classes for alarm systems
- EN/IEC 60404 series - Magnetic materials measurement and calibration
EN 50131-2-7-3:2012/IS1:2014 ensures consistent, reproducible performance and testing of active surface-mounted glass break detectors, helping manufacturers and installers meet defined security Grades and environmental requirements. Keywords: EN 50131-2-7-3, glass break detectors, active surface mounted, alarm systems, security Grade, NdFeB test magnet, CENELEC.
Frequently Asked Questions
SIST EN 50131-2-7-3:2012/IS1:2014 is a addendum published by the Slovenian Institute for Standardization (SIST). Its full title is "Alarm systems - Intrusion and hold-up systems -- Part 2-7-3: Intrusion detectors - Glass break detectors (active)". This standard covers: This European standard is for active surface mounted glass break detectors installed in buildings and provides for security Grades 1 to 4 (see EN 50131-1), specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV (see EN 50130-5). This European standard does not include requirements for active surface mounted glass break detectors intended for use outdoors. A detector shall fulfil all the requirements of the specified Grade. Functions additional to the mandatory functions specified in this standard may be included in the detector, providing they do not adversely influence the correct operation of the mandatory functions. This European standard does not apply to system interconnections.
This European standard is for active surface mounted glass break detectors installed in buildings and provides for security Grades 1 to 4 (see EN 50131-1), specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV (see EN 50130-5). This European standard does not include requirements for active surface mounted glass break detectors intended for use outdoors. A detector shall fulfil all the requirements of the specified Grade. Functions additional to the mandatory functions specified in this standard may be included in the detector, providing they do not adversely influence the correct operation of the mandatory functions. This European standard does not apply to system interconnections.
SIST EN 50131-2-7-3:2012/IS1:2014 is classified under the following ICS (International Classification for Standards) categories: 13.310 - Protection against crime; 13.320 - Alarm and warning systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 50131-2-7-3:2012/IS1:2014 has the following relationships with other standards: It is inter standard links to SIST EN 50131-2-7-3:2012, SIST EN 50131-2-7-3:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 50131-2-7-3:2012/IS1:2014 is associated with the following European legislation: EU Directives/Regulations: 2020-01-0063. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 50131-2-7-3:2012/IS1:2014 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2014
Alarmni sistemi - Sistemi za javljanje vloma in ropa - 2-7-3. del: Zahteve za
javljalnike vloma - Javljalniki loma stekla (aktivni) - Dopolnilo IS1
Alarm systems - Intrusion and hold-up systems -- Part 2-7-3: Intrusion detectors - Glass
break detectors (active)
Alarmanlagen - Einbruch- und Überfallmeldeanlagen -- Teil 2-7-3: Einbruchmelder -
Glasbruchmelder (Aktiv)
Systèmes d’alarme - Systèmes d'alarme contre l’intrusion et les hold-up -- Partie 2-7-3:
Détecteurs d'intrusion - Détecteurs bris de glace (actifs)
Ta slovenski standard je istoveten z: EN 50131-2-7-3:2012/IS1:2014
ICS:
13.310 Varstvo pred kriminalom Protection against crime
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
INTERPRETATION SHEET
EN 50131-2-7-3/IS1
FEUILLE D'INTERPRETATION
February 2014
INTERPRETATIONSBLATT
ICS 13.320
English version
Alarm systems -
Intrusion and hold-up systems -
Part 2-7-3: Intrusion detectors -
Glass break detectors (active)
Systèmes d’alarme - Alarmanlagen -
Systèmes d'alarme contre l’intrusion et les Einbruch- und Überfallmeldeanlagen -
hold-up - Teil 2-7-3: Einbruchmelder -
Partie 2-7-3: Détecteurs d'intrusion - Glasbruchmelder (Aktiv)
Détecteurs bris de glace (actifs)
This European Standard was approved by CENELEC on 2013-12-23. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2014 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50131-2-7-3:2012/IS1:2014 E
Contents Page
Foreword . 3
Clause: . 4
Question: . 4
Interpretation: . 4
Validity: .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...