SIST EN 14187-4:2017
(Main)Cold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals
Cold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals
This European Standard describes a test method of the evaluation of the resistance of cold applied joint sealants to the action of liquid chemicals by measuring the change in mass and volume after immersion in test fuels and in liquid chemicals.
Kalt verarbeitbare Fugenmassen - Teil 4: Prüfverfahren zur Bestimmung der Massen- und Volumenänderung nach Lagerung in Prüfkraftstoff
Diese Europäische Norm beschreibt ein Prüfverfahren zur Bestimmung der Beständigkeit kalt verarbeit¬barer Fugenmassen bei Einwirkung von flüssigen Chemikalien durch Messung der Massen- und der Volumen¬änderung nach Lagerung in Prüfkraftstoffen oder in flüssigen Chemikalien.
Mastics pour joints appliqués à froid - Méthodes d'essai - Partie 4: Détermination de la variation de masse et de volume après immersion dans des carburants d'essai et des produits chimiques liquides
Cette Norme européenne décrit une méthode d'essai pour déterminer la résistance des mastics pour joints appliqués à froid à l'action de liquides chimiques en mesurant la variation de masse et de volume survenant après immersion dans des carburants d'essai ou dans des produits chimiques liquides.
Hladno nanosljive tesnilne mase za stike - Preskusne metode - 4. del: Ugotavljanje spremembe mase in prostornine po namakanju v preskusnem gorivu in tekočih kemikalijah
Ta evropski standard opisuje preskusno metodo za vrednotenje odpornosti hladno nanosljivih tesnilnih mas za stike proti delovanju tekočih kemikalij z merjenjem spremembe mase in prostornine po namakanju v preskusnem gorivu ter tekočih kemikalijah.
General Information
- Status
- Published
- Public Enquiry End Date
- 29-Dec-2014
- Publication Date
- 12-Apr-2017
- Technical Committee
- CES - Roads
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 04-Apr-2017
- Due Date
- 09-Jun-2017
- Completion Date
- 13-Apr-2017
Relations
- Effective Date
- 01-May-2017
Overview
EN 14187-4:2017 is a CEN European standard that defines a laboratory test method for cold applied joint sealants. It specifies how to evaluate the resistance of cured sealants to liquid chemicals and test fuels by measuring the change in mass and the change in volume after immersion. The method is intended for use with sealants used in road and airfield joints and other civil engineering applications where exposure to fuels, oils, de-icing fluids or chemical agents is expected.
Key Topics
- Scope and principle
- Measures absorption/interaction of liquid chemicals by determining mass and volume changes of cured specimens after immersion.
- Test specimens are cut from (2.0 ± 0.1) mm sheets of cured sealant.
- Apparatus and materials
- Stoppered glass bottle or tube to keep specimens fully immersed.
- Balance capable of weighing in air and while suspended in water (accuracy 1 mg).
- Aluminium/brass mould (≈150 mm diameter × 2 mm depth).
- Convection oven controllable between 35 °C and 50 °C.
- Test liquids per Table 1 and Annex A (e.g., gasoline blend, jet fuels, oils, glycols, toluene mixtures, de-icing liquids).
- Specimen preparation and conditioning
- Produce bubble-free sheets in the specified mould; cut three specimens (30 ± 1 mm diameter) per test.
- Condition specimens per EN ISO 8340 (method A or B); if method B is used, add 24 h at 23 ± 2 °C / 50 ± 5 % RH before immersion.
- Immersion parameters
- Temperatures: 23 ± 2 °C, 35 ± 2 °C, or 50 ± 2 °C.
- Immersion times: selectable from 8 h, 24 h, 72 h, 7 days, 21 days.
- Measurement and results
- Weigh specimens in air and apparent mass in water before and after immersion (m1–m4) to compute percentage volume change; dry in oven and weigh (m5) to compute percentage mass change after drying.
- Report average values for the three specimens and note visual observations (cracking, discoloration, sedimentation).
Applications
- Quality control and type testing for manufacturers of cold applied joint sealants.
- Material selection and performance verification for road and airfield construction, maintenance contractors, and infrastructure specifiers.
- Independent testing laboratories conducting durability and chemical-resistance assessments.
- Product development teams evaluating formulation resistance to fuels, oils and de-icing chemicals.
Related Standards
- EN 14187 series (Parts 1–9) - companion test methods for cure rate, tack-free time, self-levelling, adhesion after immersion, hydrolysis resistance, flame resistance, UV artificial weathering, and function testing.
- Normative references: EN 14188-4 (primers), EN ISO 6927 (sealant vocabulary), EN ISO 8340 (tensile properties at maintained extension).
Keywords: EN 14187-4:2017, cold applied joint sealants, test methods, immersion test, change in mass and volume, chemical resistance, test fuels, sealant testing.
Frequently Asked Questions
SIST EN 14187-4:2017 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Cold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals". This standard covers: This European Standard describes a test method of the evaluation of the resistance of cold applied joint sealants to the action of liquid chemicals by measuring the change in mass and volume after immersion in test fuels and in liquid chemicals.
This European Standard describes a test method of the evaluation of the resistance of cold applied joint sealants to the action of liquid chemicals by measuring the change in mass and volume after immersion in test fuels and in liquid chemicals.
SIST EN 14187-4:2017 is classified under the following ICS (International Classification for Standards) categories: 91.100.50 - Binders. Sealing materials; 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 14187-4:2017 has the following relationships with other standards: It is inter standard links to SIST EN 14187-4:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 14187-4:2017 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.NHPLNDOLMDKKalt verarbeitbare Fugenmassen - Teil 4: Prüfverfahren zur Bestimmung der Massen- und Volumenänderung nach Lagerung in PrüfkraftstoffMastics pour joints appliqués à froid - Méthodes d'essai - Partie 4: Détermination de la variation de masse et de volume après immersion dans des carburants d'essai et des produits chimiques liquidesCold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 14187-4:2017SIST EN 14187-4:2017en,fr,de01-maj-2017SIST EN 14187-4:2017SLOVENSKI
STANDARDSIST EN 14187-4:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14187-4
March
t r s y ICS
{ uä r z rä t r Supersedes EN
s v s z yæ vã t r r uEnglish Version
Cold applied joint sealants æ Test methods æ Part
vã Determination of the change in mass and volume after immersion in test fuels and liquid chemicals Mastics pour joints appliqués à froid æ Méthodes d 5essai æ Partie
v ã Détermination de la variation de masse et de volume après immersion dans des carburants d 5essai et des produits chimiques liquides
Kalt verarbeitbare Fugenmassen æ Prüfverfahren æ Teil
vã Bestimmung der Massenæ und Volumenänderung nach Lagerung in Prüfkraftstoffen und flüssigen Chemikalien This European Standard was approved by CEN on
x February
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v s z yæ vã t r s y ESIST EN 14187-4:2017
List of liquid chemicals . 8
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...