SIST EN 60966-2-4:2004

SLOVENSKI SIST EN 60966-2-4:2004

STANDARD
april 2004
Radio frequency and coaxial cables assemblies - Part 2-4: Detail specification for
cable assemblies for radio and TV receivers - Frequency range 0 to 3 000 MHz, IEC
61169-2 connectors (IEC 60966-2-4:2003)
ICS 33.120.10 Referenčna številka
SIST EN 60966-2-4:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60966-2-4
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2003

ICS 33.120.10 Supersedes EN 60966-2-4:1997


English version


Radio frequency and coaxial cables assemblies
Part 2-4: Detail specification for cable assemblies
for radio and TV receivers -
Frequency range 0 to 3 000 MHz, IEC 61169-2 connectors
(IEC 60966-2-4:2003)


Ensemble de cordons coaxiaux et de Konfektionierte Koaxial- und
cordons pour fréquences radioélectriques Hochfrequenzkabel
Partie 2-4: Spécification particulière Teil 2-4: Bauartspezifikation für
pour cordons de connexion konfektionierte Kabel für Ton- und
de récepteurs TV ou radio - Fernsehrundfunkempfänger -
Bande de fréquences de 0 à 3 000 MHz, Frequenzbereich 0 bis 3 000 MHz,
connecteurs CEI 61169-2 IEC 60169-2 Steckverbinder
(CEI 60966-2-4:2003) (IEC 60966-2-4:2003)




This European Standard was approved by CENELEC on 2003-05-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60966-2-4:2003 E

---------------------- Page: 2 ----------------------

EN 60966-2-4:2003 - 2 -
Foreword

The text of document 46A/508/FDIS, future edition 2 of IEC 60966-2-4, prepared by SC 46A, Coaxial
cables, of IEC TC 46, Cables, wires, waveguides, r.f. connectors, r.f. and microwave passive
components and accessories, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60966-2-4 on 2003-05-01.

This European Standard supersedes EN 60966-2-4:1997.

The following dates were fixed:

– latest date by which the EN has to be implemented
 at national level by publication of an identical
 national standard or by endorsement (dop) 2004-02-01

– latest date by which the national standards conflicting
 with the EN have to be withdrawn (dow) 2006-05-01
__________

Endorsement notice

The text of the International Standard IEC 60966-2-4:2003 was approved by CENELEC as a European
Standard without any modification.

In the official version, for the Introduction, the following notes have to be added for the standards
indicated:

IEC 60966-1 NOTE Harmonized as EN 60966-1:1999 (not modified).

IEC 60966-2-1 NOTE Harmonized as EN 60966-2-1:1995 (not modified).

IEC 60966-2-2 NOTE Harmonized as EN 60966-2-2:1994 (not modified).

IEC 61169-2 NOTE Harmonized as EN 61169-2:2001 (not modified).
__________

---------------------- Page: 3 ----------------------

INTERNATIONAL IEC
STANDARD
60966-2-4
Second edition
2003-03
Radio frequency and coaxial cable assemblies –
Part 2-4:
Detail specification for cable assemblies
for radio and TV receivers – Frequency range
0 to 3 000 MHz, IEC 61169-2 connectors
Ensemble de cordons coaxiaux et de cordons
pour fréquences radioélectriques –
Partie 2-4:
Spécification particulière pour cordons de connexion
de récepteurs TV ou radio – Bande de fréquences
de 0 à 3 000 MHz, connecteurs CEI 60169-2
 IEC 2003  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch  Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
F
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue

---------------------- Page: 4 ----------------------

– 2 – 60966-2-4  IEC:2003(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES –
Part 2-4: Detail specification for cable assemblies for radio and
TV receivers – Frequency range 0 to 3 000 MHz, IEC 61169-2 connectors
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are
...