iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1316-3:2003

(Main)

Hardwood round timber - Qualitative classification - Part 3: Ash and maples and sycamore

Hardwood round timber - Qualitative classification - Part 3: Ash and maples and sycamore

This European Standard specifies a qualitative classification and grade designations for felled trees of ash (Fraxinus excelsior) and maples presented in the form of long poles or logs. The classifications describe quality classes of round timbers for which the intended use is not known. The maples classification is applied for the following species: sycamore maple (Acer pseudoplatanus) and maples (Acer platanoides), (Acer campestris).

Laub-Rundholz - Qualitäts-Sortierung - Teil 3: Esche und Ahorn

Diese Europäische Norm legt die Qualitäts-Sortierung und Kennzeichnung der Klassen für gefällte Esche (Fraxinus excelsior) und gefällten Ahorn in Form von Langholz oder Stammabschnitten fest. Die Sortierung beschreibt Qualitätsklassen für Rundhölzer, deren zukünftige Nutzung nicht bekannt ist. Die Qualitäts-Sortierung für Ahorn gilt für folgende Arten: Acer pseudoplatanus, Acer platanoides und Acer campestris.

Bois ronds feuillus - Classement qualitatif - Partie 3: Frene et érables

La présente norme européenne prescrit le classement qualitatif et les appellations des classements des bois abattus de frene (Fraxinus excelsior) et d'érables qui se présentent sous forme de grumes ou billes. Les classements décrivent des classes de qualité des bois ronds pour lesquels l'utilisation n'est pas connue. Le classement des érables s'applique pour les especes suivantes: Acer pseudoplatanus, Acer platanoides, Acer campestri.

Okrogli les listavcev – Razvrščanje po kakovosti – 3. del: Jesen, javor in platana

General Information

Status
Withdrawn
Publication Date
31-May-2003
Withdrawal Date
22-Dec-2011
ICS
79.040 - Wood, sawlogs and sawn timber
Technical Committee
LLZ - Les, lesni izdelki in zaščita lesa
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
16-Dec-2011
Due Date
08-Jan-2012
Completion Date
23-Dec-2011
Directive
TP006 - Pravilnik o merjenju in razvrščanju gozdnih lesnih proizvodov
Ref Project
EN 1316-3:1997 - Hardwood round timber - Qualitative classification - Part 3: Ash and maples and sycamore

Buy Standard

EN 1316-3:2003EN 1316-3:2003
PreviousNext
Standard
EN 1316-3:2003
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Laub-Rundholz - Qualitäts-Sortierung - Teil 3: Esche und AhornBois ronds feuillus - Classement qualitatif - Partie 3: Frene et érablesHardwood round timber - Qualitative classification - Part 3: Ash and maples and sycamore79.040Les, hlodovina
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 351-2:2023(Main)
Durability of wood and wood-based products - Preservative-treated solid wood - Part 2: Guidance on sampling for the analysis of preservative-treated wood
EN 351-2:2023

This part of EN 351 gives guidance on the general procedures to be used in obtaining samples of preservative-treated wood for the determination of penetration and retention of wood preservative. It also gives guidance on how to measure the penetration and retention of a wood preservative in the treated wood.
This part of EN 351 is applicable to the production of preservative-treated solid wood, including glued laminated timber, suitable for use in those service conditions defined by the use classes in EN 335.
This part of EN 351 is not applicable to preservative-treated wood in service. However, the sampling guidance provided within this part of EN 351 may be applied for the subsequent examination of treated wood in service.
Annex A (informative) provide a selection of number of sampling units.
Annex B (informative) provides examples of retention measurements.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 351-1:2023(Main)
Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention
EN 351-1:2023

This part of EN 351 establishes a classification of preservative-treated wood in terms of preservative penetration and gives guidance on a classification of retention. These shall be used as a basis for specifying preservative treatments for particular products.
This part of EN 351 provides terminology to be used by the specifier when preparing a preservative treatment specification or product standard. It is not a treatment specification in itself.
This part of EN 351 is applicable to the production of preservative-treated solid wood, including glued laminated timber, suitable for use in those service conditions defined by the use classes in EN 335. It does not apply to any subsequent examination of treated wood in service.
This part of EN 351 is applicable to the protection of wood against attack by wood-destroying and wood-disfiguring fungi, insects and marine organisms.
NOTE   Protection against wood-disfiguring fungi is an optional property verified by testing in accordance with EN 599-1.
This part of EN 351 does not consider other properties of treated wood, for example odour, compatibility with other materials, such as corrosivity of fasteners. Nor does it consider any properties from the health, safety and environmental point of view.
This part of EN 351 does not apply to wood to be treated with formulations which are applied to timber in service to eliminate or control an existing fungal or insect infestation, or the prevention of attack by sapstain fungi, or insects in green timber.
Annex A (informatives) provides a decision process for defining preservative treatment requirements.
Annex B (informative) gives an example of the marking system.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 460:2023(Main)
Durability of wood and wood-based products - Guidance on performance
EN 460:2023

This document gives guidance on the selection of wood of wood and wood based products for use in situations where they may be subject to degradation by fungi or wood destroying insects. This guidance includes information on factors that can influence the service life of a wood or wood-based product when considering biological degradation. This document is a step toward the evaluation of the service life of a wood product.
This document does not consider:
1)   the durability characteristics of the glue used in wood-based products;
2)   the aesthetic function of wood products (discoloration, surface weathering, mould).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14734:2022/AC:2023(Corrigendum)
Durability of wood and wood-based products - Determination of treatability of timber species to be impregnated with wood preservatives - Laboratory method
EN 14734:2022/AC:2023

This document specifies a laboratory method for the determination of the treatability of wood in order to determine the likely reaction of different wood species to impregnation with wood preservatives. It is also applicable to investigate variation between samples of the same species but of different origin.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14734:2022(Main)
Durability of wood and wood-based products - Determination of treatability of timber species to be impregnated with wood preservatives - Laboratory method
EN 14734:2022

This document describes a laboratory method for the determination of the treatability of wood in order to determine the likely reaction of different wood species to impregnation with wood preservatives. It can also be used to investigate variation between samples of the same species but of different origin.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14128:2020(Main)
Durability of wood and wood-based products - Efficacy criteria for curative wood preservatives as determined by biological tests
EN 14128:2020

This European Standard specifies the minimum performance requirements in biological tests for products for curative uses against specific wood destroying organisms. It specifies the biological tests required together with the efficacy criteria to be achieved in each test.
Chemicals against insects can act according to their specific properties within a short time (fast acting) or only after a long period (slow acting or with a deferred effect). Different tests and efficacy requirements are needed for these various types of curative wood preservatives.
This European Standard is applicable to all wood preservative products supplied for application in liquid form for curative uses against attack by wood boring beetles. This European Standard is also applicable for products applied to prevent the growth of the dry rot fungus through masonry.
This European Standard is also applicable to products for curative uses supplied for application as pastes, solids or in capsule form but only where appropriate biological methods of test exist as published European Standards or as normative annexes to this European Standard.
NOTE 1   For re-testing after making variations in product formulation, guidance is given in Annex A.
NOTE 2   This standard is used as a reference document for the evaluation of efficacy of biocidal products PT8 (wood preservatives) in the framework of the European Regulation on Biocidal Products (EU) No 528/2012 (BPR).
This European Standard is not applicable to products used as fumigants.
This European Standard is also not applicable for determining whether specific curative products, used alone or in combination, are effective in conferring long-term protection against attack by wood destroying organisms. Preventive effectiveness can be determined using EN 599-1 but only for products that can be tested using the methods and interpretative procedures defined in EN 599-1.
Annex A (informative) contains a guidance on re-testing after making variations in product formulation.
Annex B (informative) contains some test recommendations for specific curative products against other insect species than Hylotrupes bajulus and Anobium punctatum.
Annex C (informative) contains a guidance for physical chemical properties.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 844:2019(Main)
Round and sawn timber - Terminology
EN 844:2019

This European Standard defines general terms relating to sawn timber and round timber used in European Standards.

  • Standard
    100 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    92 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16818:2018(Main)
Durability of wood and wood-based products - Moisture dynamics of wood and wood-based products
CEN/TS 16818:2018

This European Standard specifies a method for determining the water uptake and the effectiveness of the drying process of solid wood, wood based materials or coated wood by means of water absorption and water vapour desorption. This European Standard lays down a method to assess the moisture dynamics of wooden products and indirectly their susceptibility to wood rot.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16755:2017/AC:2018(Corrigendum)
Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications
EN 16755:2017/AC:2018

CCMC - addition of superseding note in the European Foreword

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1309-3:2018(Main)
Round and sawn timber - Methods of measurements - Part 3: Features and biological degradations
EN 1309-3:2018

This European Standard specifies the methodology for measurement of features - in relation to wood structure, biological agencies and other damage - taken into account in the visual grading:
a)   for appearance - of sawn, processed and round timber;
b)   for serviceability - of sawn and processed timber (identified in EN 1611-1 as the integrity of the timber).
When the standard is applied the methodology of measurement used shall be stated.
It is not applicable to structural timber for which strength grading in accordance with EN 14081-1 is required.
This standard applies to hardwood and softwood sawn timber, both square edged and un-edged, to processed timber and to round timber.
It does not apply to tropical timber.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day