SIST I-ETS 300 489-1 E1:2003
(Main)Terminal Equipment (TE); Conformance testing for file transfer over the Integrated Services Digital Network (ISDN); Part 1: Profile Test Specification Summary (PTS-Summary) for the FTAM profile (ETS 300 388)
Terminal Equipment (TE); Conformance testing for file transfer over the Integrated Services Digital Network (ISDN); Part 1: Profile Test Specification Summary (PTS-Summary) for the FTAM profile (ETS 300 388)
Conformance testing specification for file transfer protocol EN 41216 (ISP 10607) Simple FTAM & ETS 300 388 (FTAM over ISDN). Use existing conformance testing for FTAM. Establish: Profile Test Specification Summary for ETS 300 388
Terminalska oprema (TE) – Preskušanje skladnosti prenosa datotek prek digitalnega omrežja z integriranimi storitvami (ISDN) – 1. del: Povzetek specifikacije preskušanja profila (povzetek PTS) za profil FTAM (ETS 300 338)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST I-ETS 300 489-1 E1:2003
01-december-2003
Terminalska oprema (TE) – Preskušanje skladnosti prenosa datotek prek
digitalnega omrežja z integriranimi storitvami (ISDN) – 1. del: Povzetek
specifikacije preskušanja profila (povzetek PTS) za profil FTAM (ETS 300 338)
Terminal Equipment (TE); Conformance testing for file transfer over the Integrated
Services Digital Network (ISDN); Part 1: Profile Test Specification Summary (PTS-
Summary) for the FTAM profile (ETS 300 388)
Ta slovenski standard je istoveten z: I-ETS 300 489-1 Edition 1
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
35.180 Terminalska in druga IT Terminal and other
periferna oprema IT peripheral equipment
SIST I-ETS 300 489-1 E1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST I-ETS 300 489-1 E1:2003
---------------------- Page: 2 ----------------------
SIST I-ETS 300 489-1 E1:2003
INTERIM
EUROPEAN I-ETS 300 489-1
TELECOMMUNICATION October 1996
STANDARD
Source: ETSI TC-TE Reference: DI/TE-01061-1
ICS: 33.080
Key words: FT, ISDN, protocol, testing
Terminal Equipment (TE);
Conformance testing for file transfer over
the Integrated Services Digital Network (ISDN);
Part 1: Profile Test Specification Summary (PTS-Summary)
for the FTAM profile (ETS 300 388)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.fr
Tel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1996. All rights reserved.
---------------------- Page: 3 ----------------------
SIST I-ETS 300 489-1 E1:2003
Page 2
I-ETS 300 489-1: October 1996
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.
---------------------- Page: 4 ----------------------
SIST I-ETS 300 489-1 E1:2003
Page 3
I-ETS 300 489-1: October 1996
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Definitions and abbreviations .9
3.1 Definitions .9
3.2 Abbreviations .9
4 General.9
5 Profile identification .9
6 Elements of the profile test specification.10
6.1 Conformance testing specification for basic FTAM file transfer .10
6.1.1 FTAM initiator ATS.10
6.1.2 FTAM responder ATS .10
6.2 Conformance testing specification for full FTAM file transfer and management.10
6.2.1 FTAM initiator ATS.10
6.2.2 FTAM responder ATS .10
6.2.3 FTAM restart and recovery ATS.10
6.2.4 FTAM management ATS .10
6.3 Conformance testing specification for Association Control Service Element (ACSE).11
6.4 Conformance testing specification for presentation.11
6.5 Conformance testing specification for Session.11
7 Conformance testing specifications not related to any single component .11
8 Conformance clause .12
History.13
---------------------- Page: 5 ----------------------
SIST I-ETS 300 489-1 E1:2003
Page 4
I-ETS 300 489-1: October 1996
Blank page
---------------------- Page: 6 ----------------------
SIST I-ETS 300 489-1 E1:2003
Page 5
I-ETS 300 489-1: October 1996
Foreword
Part 1 of this Interim European Telecommunication Standard (I-ETS) has been produced by the Terminal
Equipment (TE) Technical Committee of the European Telecommunications Standards Institute (ETSI).
An ETSI standard may be given I-ETS status either because it is regarded as a provisional solution ahead
of a more advanced standard, or because it is immature and requires a "trial period". The life of an I-ETS
is limited to three years after which it can be converted into an ETS, have its life extended for a further two
years, be replaced by a new version, or be withdrawn.
This is the first Part of an I-ETS which comprises of two parts as follows:
"Terminal Equipment (TE); Conformance testing for file transfer over the Integrated Services Digital
Network (ISDN);
Part 1: Profile Test Specification Summary (PTS-Summary) for the FTAM profile
(ETS 300 388);
Part 2: Profile Specific Test Specification (PSTS) for the FTAM profile (ETS 300 388)".
Proposed announcement date
Date of adoption of this I-ETS: 4 October 1996
Date of latest announcement of this I-ETS (doa): 31 January 1997
---------------------- Page: 7 ----------------------
SIST I-ETS 300 489-1 E1:2003
Page 6
I-ETS 300 489-1: October 1996
Blank page
---------------------- Page: 8 ----------------------
SIST I-ETS 300 489-1 E1:2003
Page 7
I-ETS 300 489-1: October 1996
1 Scope
Part 1 of this I-ETS describes all the references used for testing the File Transfer Access and
Management (FTAM) simple file transfer profile (ETS 300 388 [1]).
2 Normative references
This I-ETS incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this I-ETS only when incorporated in it by amendment or revision. For undated references the
latest edition of the publication referred to applies.
[1] ETS 300 388 (1995): "Integrated Services Digital Network (ISDN); File Transfer
and Access Management (FTAM) over ISDN based on simple file transfer
protocol".
[2] ISO/IEC ISP 10607-3 (1990): "Information technology - International
Standardized Profiles AFTnn - File Transfer, Access and Management - Part 3:
AFT11 - Simple File Transfer Service (unstructured)".
[3] ISO/IEC TR 10000-2 (1994): "Information technology - Framework and
taxonomy of International Standardized Profiles - Part 2: Principles and
Taxonomy for OSI Profiles".
[4] ISO/IEC ISP 10607-6 (1991): "Information technology - International
Standardized Profiles AFTnn - File Transfer, Access and Management - Part 6:
AFT3 - File Management Service".
[5] ISO/IEC 9646, Parts 1 to 7: "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework -
Part 1 (1994): General Concepts;
Part 2 (1994): Abstract Test Suite specification;
Part 3 (1992): The Tree and Tabular Combined Notation (TTCN);
Part 4 (1994): Test realization;
Part 5 (1994): Requirements on test laboratories and clients for the
conformance assessment process;
Part 6 (1994): Protocol profile test specification;
Part 7 (1993) [DIS]: "Implementation conformance statements".
[6] EWOS ED 88 (1994): "EWOS/CTS FTAM Abstract Test Suite, (Binders 0
to 12)".
NOTE: EWOS ED 88 (1994) can be obtained in its .MP format from the EWOS Secretariat,
Rue de Stasart, 36; B-1050 Brussels, Belgium (Tel: +32 2 511 74 55 or
fax: +32 2 511 87 23).
[7] I-ETS 300 489-2 (19
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.