SIST EN 4710-01:2019
(Main)Aerospace series - Quick release fastening systems for non-structural applications - Part 01: Technical specification
Aerospace series - Quick release fastening systems for non-structural applications - Part 01: Technical specification
This European Standard specifies the required characteristics, inspections, tests, quality assurance requirements, conditions for qualification acceptance and delivery of quick release fastening systems.
This European Standard applies to all fastening systems for use in fuselage interior equipment and non-structural or secondary structural area.
It may be applied when referred to in the product standard or in a design specification.
Luft- und Raumfahrt - Schnellverschlüsse für nicht-strukturelle Anwendungen - Teil 01: Technische Lieferbedingunge
Diese Europäische Norm legt die erforderlichen Kennwerte, Inspektionen, Prüfungen, Anforderungen an die Qualitätssicherung und die Qualifikations-, Abnahme- und Lieferbedingungen für Schnellverschlüsse fest.
Diese Europäische Norm gilt für alle Verschlusssysteme, die bei der Inneneinrichtung von Luftfahrzeugen und in nicht-strukturellen oder Sekundärstrukturbereichen verwendet werden.
Sie darf angewendet werden, wenn in der Produktnorm oder in Planungsunterlagen auf sie verwiesen wird.
Série aérospatiale - Fxations rapides filetées pour applications non-structurales - Partie 01 : Spécification technique
La présente Norme européenne spécifie les caractéristiques, les contrôles, les essais, les exigences d’assurance qualité, les conditions de qualification relatives à la réception et à la livraison requis pour les fixations rapides filetées.
La présente Norme européenne s’applique à toutes les fixations pour utilisation dans les équipements intérieurs et les zones non structurales ou structurales secondaires du fuselage.
Elle peut s’appliquer lorsqu’elle est citée en référence dans la norme de produit ou la spécification de conception.
Aeronavtika - Spončni sistemi za hitro sprostitev za nestrukturno uporabo - 01. del: Tehnična specifikacija
Ta evropski standard določa zahtevane lastnosti, preglede, preskuse, zahteve za zagotavljanje kakovosti, pogoje za odobritev kvalifikacije in dostavo spončnega sistema za hitro sprostitev.
Ta evropski standard se uporablja za vse spončne sisteme, ki se uporabljajo v notranji opremi v trupu letala ter nestrukturnem ali sekundarnem strukturnem območju.
Lahko se uporablja v primerih, ko je naveden v standardu za izdelek ali v specifikaciji zasnove.
General Information
- Status
- Published
- Publication Date
- 14-Nov-2018
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 08-Nov-2018
- Due Date
- 13-Jan-2019
- Completion Date
- 15-Nov-2018
Relations
- Effective Date
- 07-Nov-2018
- Effective Date
- 29-Mar-2017
Overview
EN 4710-01:2018 - Aerospace series: Quick release fastening systems for non‑structural applications - Part 01: Technical specification - is a European Standard published by CEN that defines the technical, inspection, test and quality assurance requirements for quick release fastening systems used in aircraft fuselage interiors and other non‑structural or secondary structural areas. It applies when referenced by a product standard or design specification and covers materials, dimensions, surface treatment, mechanical performance, corrosion resistance, fire behaviour and delivery documentation.
Key topics and requirements
- Scope: Fastening systems for fuselage interior equipment, covers, linings and similar non‑structural fittings.
- Materials & traceability: Chemical composition evidence (inspection certificate per EN 10204) is required.
- Dimensions & mass: Documented in accordance with EN 9102 (First Article Inspection) and relevant product standards.
- Surfaces: Free from defects per EN ISO 8785; surface treatments substantiated by EN 10204 certificates.
- Mechanical performance:
- Ultimate tensile and shear tests - no plastic deformation permitted; test speed V = 100 mm/min, stop at maximum load ≥ 5 s.
- Push‑in load - tested at V = 100 mm/min with no permanent deformation.
- Torque‑out load - spring clamps riveted to a plate and measured with a torque wrench; torque values must be consistent in both directions.
- Corrosion: 96‑hour salt spray test per EN ISO 9227.
- Fire/flammability: Silicone and other non‑metallic components must meet fire worthiness, smoke and toxicity limits as referenced to FAR/JAR/CS 25.853, EN 2826 and EN 3844‑2 (example limits: smoke density Dm ≤ 200; HCN ≤ 150 ppm; NO/NO2 ≤ 100 ppm; SO2/H2S ≤ 100 ppm; HF ≤ 100 ppm; HCl ≤ 150 ppm).
- Functionality & endurance: All plug/stud and clamp combinations must mate and withstand specified locking/unlocking cycle tests to assess wear.
- Identification & documentation: Product marking per EN 2424; each delivery must include conformance test results and FAI documentation.
- Quality system & qualification: Manufacturer approval requires EN ISO 9001 / EN 9100 (or equivalent). Qualification follows a Qualification Test Program (QTP) and Qualification Test Report (QTR) per EN 9133 / EN 9102.
- Sampling: Series production acceptance typically requires 5 test samples; qualification sample sizes specified in the standard.
Practical applications
- Use this standard to specify, procure, design, qualify and inspect quick‑release fasteners for aircraft interior panels, access doors, service panels, and non‑structural equipment attachments.
- It ensures consistent mechanical, corrosion and fire performance and provides documented acceptance and qualification procedures for suppliers and manufacturers.
Who should use this standard
- Aerospace fastener manufacturers and suppliers
- Interior equipment designers and OEMs
- Quality assurance and compliance engineers
- Procurement teams and certification authorities
Related standards (selected)
- EN 2424, EN 2826, EN 3844‑2, EN 9100, EN 9102, EN 9133, EN 10204, EN ISO 8785, EN ISO 9227, FAR/JAR/CS 25.853
Keywords: EN 4710-01:2018, quick release fastening systems, aerospace fasteners, fuselage interior, qualification test, first article inspection, acceptance test, EN 9100.
Frequently Asked Questions
SIST EN 4710-01:2019 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Quick release fastening systems for non-structural applications - Part 01: Technical specification". This standard covers: This European Standard specifies the required characteristics, inspections, tests, quality assurance requirements, conditions for qualification acceptance and delivery of quick release fastening systems. This European Standard applies to all fastening systems for use in fuselage interior equipment and non-structural or secondary structural area. It may be applied when referred to in the product standard or in a design specification.
This European Standard specifies the required characteristics, inspections, tests, quality assurance requirements, conditions for qualification acceptance and delivery of quick release fastening systems. This European Standard applies to all fastening systems for use in fuselage interior equipment and non-structural or secondary structural area. It may be applied when referred to in the product standard or in a design specification.
SIST EN 4710-01:2019 is classified under the following ICS (International Classification for Standards) categories: 49.030.01 - Fasteners in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 4710-01:2019 has the following relationships with other standards: It is inter standard links to SIST EN 4710-001:2015, SIST EN 4710-001:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 4710-01:2019 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Schnellverschlüsse für nicht-strukturelle Anwendungen - Teil 01: Technische LieferbedingungeSérie aérospatiale - Fxations rapides filetées pour applications non-structurales - Partie 01 : Spécification techniqueAerospace series - Quick release fastening systems for non-structural applications - Part 01: Technical specification49.030.01Vezni elementi na splošnoFasteners in generalICS:Ta slovenski standard je istoveten z:EN 4710-01:2018SIST EN 4710-01:2019en,fr,de01-januar-2019SIST EN 4710-01:2019SLOVENSKI
STANDARDSIST EN 4710-001:20151DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4710-01
October
t r s z ICS
v {ä r u w Supersedes EN
v y s ræ r sã t r s wEnglish Version
Aerospace series æ Quick release fastening systems for nonæstructural applications æ Part
r sã Technical specification Série aérospatiale æ Fixations rapides filetées pour applications nonæstructurales æ Partie
r s ã Spécification technique
Luftæ und Raumfahrt æ Schnellverschlüsse für nichtæstrukturelle Anwendungen æ Teil
r sã Technische Lieferbedingungen This European Standard was approved by CEN on
t r May
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v y s ræ r sã t r s z ESIST EN 4710-01:2019
(informative)
Standard evolution form . 13
This European Standard applies to all fastening systems for use in fuselage interior equipment and non-structural or secondary structural area. It may be applied when referred to in the product standard or in a design specification. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series — Marking of aerospace products EN 2826, Aerospace series — Burning behaviour of nonmetallic materials under the influence of radiating heat and flames — Determination of gas components in the smoke EN 3844-2, Aerospace series — Flammability of nonmetallic materials — Part 2: Small burner test, horizontal — Determination of the horizontal flame propagation EN 9100, Quality Management Systems — Requirements for Aviation, Space and Defence Organizations EN 9102:2015, Aerospace series — Quality systems — First article inspection requirements EN 9133, Aerospace series — Quality management systems — Qualification procedure for aerospace standard parts EN 10204, Metallic products — Types of inspection documents EN ISO 8785, Geometrical product specification (GPS) — Surface imperfections — Terms, definitions and parameters (ISO 8785) EN ISO 9001, Quality management systems — Requirements (ISO 9001) EN ISO 9227, Corrosion tests in artificial atmospheres — Salt spray tests (ISO 9227) FAR/JAR/CS 25.853, Compartment Interiors1) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply.
1) Published by: European Aviation Safety Agency, Postfach 101253, D-50452 Koeln, Germany. SIST EN 4710-01:2019
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...