SIST EN 16120:2013+A2:2017
(Main)Child use and care articles - Chair mounted seat
Child use and care articles - Chair mounted seat
This European Standard specifies safety requirements and test methods for chair mounted seats intended to be positioned on an adult chair to raise the sitting position of a child able to sit unaided up to an age of 36 months or a maximum weight of 15 kg.
This European Standard does not apply to cushions, pads and to products only aimed at restraining the child on a chair without raising the child's sitting position.
Artikel für Säuglinge und Kleinkinder - Sitzerhöhungen für Stühle
Diese Europäische Norm legt Sicherheitsanforderungen an und Prüfverfahren für Sitzerhöhungen für Stühle fest, die an einem Stuhl für Erwachsene zu positionieren und dafür vorgesehen sind, die Sitzposition eines Kindes im Alter von bis zu 36 Monaten oder mit einem Höchstgewicht von 15 kg, das ohne Unterstützung sitzen kann, anzuheben.
Die Europäische Norm gilt nicht für Kissen, Polster und Produkte, die nur darauf abzielen, das Kind auf einem Stuhl zurückzuhalten, ohne dessen Sitzposition zu erhöhen.
Articles de puériculture - Rehausseurs de chaise
La présente Norme européenne définit les exigences de sécurité et les méthodes d’essai correspondantes pour les rehausseurs de chaise conçus pour être installés sur des chaises pour adulte destinés aux enfants capables de se tenir assis tous seuls, jusqu’à un âge de 36 mois ou un poids maximum de 15 kg.
La présente Norme européenne ne s’applique pas aux coussins, coussinets, ni aux produits destinés à retenir l’enfant sur une chaise sans rehausser sa position d’assise.
Izdelki za otroke - Otroški sedeži, ki se pritrdijo na stol (vključno z dopolnilom A2)
Ta evropski standard določa varnostne zahteve in preskusne metode za otroške sedeže, ki se pritrdijo na stol za odrasle in povišajo sedeči položaj otroka, da lahko sedi brez nadzora odraslih. Uporablja se za otroke do 36 mesecev z največjo težo do 15 kg.
V ta evropski standard niso vključene blazine, obloge in izdelki, ki so namenjeni samo za zadrževanje otroka na stolu in ne povišajo njegovega sedečega položaja.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Artikel für Säuglinge und Kleinkinder - Sitzerhöhungen für StühleArticles de puériculture - Rehausseurs de chaiseChild use and care articles - Chair mounted seat97.190Otroška opremaEquipment for children97.140PohištvoFurnitureICS:Ta slovenski standard je istoveten z:EN 16120:2012+A2:2016SIST EN 16120:2013+A2:2017en,fr,de01-marec-2017SIST EN 16120:2013+A2:2017SLOVENSKI
STANDARDSIST EN 16120:2013+A1:20141DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16120:2012+A2
December 2016 ICS 97.190; 97.140 Supersedes EN 16120:2012+A1:2014
English Version
Child use and care articles - Chair mounted seat
Articles de puériculture - Rehausseurs de chaise
Artikel für Säuglinge und Kleinkinder - Sitzerhöhungen für Stühle This European Standard was approved by CEN on 25 February 2014 and includes Amendment 2 approved by CEN on 17 September 2016.
This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 18 January 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16120:2012+A2:2016 E SIST EN 16120:2013+A2:2017
Rationales . 27 A.1 Introduction. 27 A.2 Chemical hazards (see Clause 6) . 27 A.3 Thermal hazards (see Clause 7) . 27 A.4 Mechanical hazards (see Clause 8) . 27 A.4.1 Entrapment hazards (see 8.2) . 27 A.4.2 Hazards due to moving parts (see 8.3) . 27 A.4.3 Entanglement hazards (see 8.4) . 28 A.4.4 Choking and ingestion hazards (see 8.5) . 28 A.4.5 Suffocation hazards (see 8.6) . 28 A.4.6 Hazardous edges, corners and protruding parts (see 8.7) . 28 A.4.7 Hazards from inadequate structural integrity (see 8.8) . 28 A.4.8 Hazards from falling (see 8.9) . 28 !Annex B (informative)"
A-deviation . 30 #Annex C$ (normative)
Warnings . 31 Bibliography . 41
Key 1 line scribed around circumference showing depth of penetration
Probe type 7 mm probe 12 mm probe Diameter A 00,17− 0,1012+ Radius RB 3,5 ± 0,2 6 ± 0,2 Figure 1 — Test probes with hemispherical end Dimensions in millimetres
Figure 2 — Test probe for mesh 4.2 Test mass A A cylindrical bag with a diameter of 180 mm filled with sand to a total mass of 10 kg. SIST EN 16120:2013+A2:2017
Figure 3 — Small parts cylinder 4.5 Feeler gauge Gauge with a thickness of (0,4 ± 0,02) mm and an insertion edge radius of (3 ± 0,5) mm (see Figure 4). Dimensions in millimetres
Figure 4 — Feeler gauge SIST EN 16120:2013+A2:2017
a
b c
86 40 120 Key 1 handle Figure 5 — Small torso probe 4.7 Test beam A beam, 86 mm wide with a mass of 0,5 kg ± 10 g. 4.8 Test sphere A sphere made of steel with a diameter of 90 mm and a weight of (3,0 ± 0,1) kg.$ 5 General 5.1 Product conditioning Before testing, any fabrics used shall be cleaned or washed and dried twice in accordance with the manufacturer's instructions. 5.2 Test conditions The tests shall be carried out at a temperature of (20 ± 5) °C. The tests are designed to be applied to chair mounted seats that are fully assembled and ready for use in accordance with the manufacturer’s instructions. If the chair mounted seat can be assembled or adjusted in different ways, the most onerous combination shall be used for each test. 5.3 Application of forces The forces in the static load tests shall be applied sufficiently slowly to ensure that negligible dynamic force is applied. 5.4 Tolerances Unless otherwise stated, the following tolerances apply: SIST EN 16120:2013+A2:2017
Top view Side view Key 1 sphere 2 backrest 3 lateral protections 4 beam (in top view the beam is not shown for easier representation of the sphere) Figure 6 — Test method for lateral protections: movement of the sphere along the backrest SIST EN 16120:2013+A2:2017
Key 1 backrest 2 lateral protections 3 beam Figure 7 — Test method for lateral protections: positioning of the test beam at 130mm from the backrest Dimensions in millimetres
Top view Side view Key 1 sphere 2 backrest 3 lateral protections 4 beam (in top view the beam is not shown for easier representation of the sphere) Figure 8 — Test method for lateral protections: movement of the sphere along the lateral protection$ # 8.9.4 Hazards due to inadequate size (see A.4.8.2)$ # SIST EN 16120:2013+A2:2017
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...