Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package

This standard specifies two methods of determining the location of the centre of gravity of flat sided rigid packages or unit loads.  In the following text, a package or a unit load is called "a test item".

Verpackung - Versandfertige Packstücke - Prüfung zur Bestimmung des Schwerpunktes eines Packstückes

Diese Norm beschreibt zwei Verfahren, um zu bestimmen, wo sich der Schwerpunkt von flachseitigen steifen Packstücken oder Ladeeinheiten befindet. Im folgenden Text wird ein Packstück oder eine Ladeeinhet als "ein Prüfgegenstand" bezeichnet.

Emballages - Emballages d'expédition complets et pleins - Méthodes d'essai pour la détermination du centre de gravité d'un emballage

La présente norme prescrit deux méthodes de détermination de l'emplacement du centre de gravité des emballages rigides ou des unités de charge à côtés plats. Dans la suite du texte, le terme "échantillon" désigne un emballage ou une unité de charge.

Embalaža - Celovita, napolnjena transportna embalaža - Preskusne metode za ugotavljanje težišča paketa

General Information

Status
Published
Publication Date
31-Dec-2001
ICS
55.180.40 - Complete, filled transport packages
Technical Committee
EPO - Packaging - sales and grouped
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jan-2002
Due Date
01-Jan-2002
Completion Date
01-Jan-2002
Directive
80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
Ref Project
EN 13054:2001 - Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package

Overview

EN 13054:2001 (CEN) defines test methods for the determination of the centre of gravity of complete, filled transport packages. The standard applies to flat-sided rigid packages or assembled unit loads - in the document these are referred to as a "test item." It specifies two distinct methods for locating the centre of gravity so that manufacturers, logistics teams and testing laboratories can assess package balance and behavior during handling and transport.

Understanding a package's centre of gravity is essential for safe handling, correct lifting, stable stacking and reliable load planning. EN 13054:2001 provides a harmonized approach for organizations to produce repeatable, comparable results.

Key Topics

  • Scope and applicability: Flat-sided rigid packages and unit loads (test items).
  • Two specified methods: The standard lists two approved procedures to determine the centre of gravity. (The standard text describes which method is appropriate depending on package geometry and testing context.)
  • Measurement intent: Locate the centre of gravity relative to package geometry to support safe operations.
  • Terminology: Defines terms such as "test item" to ensure consistent interpretation across users.

EN 13054 emphasizes practical measurement outcomes rather than prescribing a single universal technique, allowing selection of the most suitable method for the test item and facility capabilities.

Applications

The standard is used by a wide range of stakeholders involved in packaging, transport and logistics:

  • Packaging designers: Validate designs for balance and handling before production.
  • Manufacturers: Check filled package stability and identify potential handling hazards.
  • Logistics and warehouse teams: Plan lifting points, forklift handling and stacking patterns based on measured centres of gravity.
  • Testing laboratories: Provide certified measurements to support compliance, customer requirements and risk assessments.
  • Quality assurance: Integrate centre-of-gravity data into acceptance criteria for unit loads.

Benefits include improved handling safety, reduced risk of load shifts, more accurate load distribution planning and better compatibility with automated handling systems.

Related Standards

  • Other CEN packaging and transport standards covering load securing, packaging performance and testing methods.
  • International packaging and handling guidance used alongside EN 13054 where global workflows exist.

For organisations assessing package stability and handling risks, EN 13054:2001 is a focused, practical reference to establish consistent measurement of the centre of gravity for flat-sided rigid transport packages and unit loads. Use it with your internal procedures and complementary standards for load securing and transport safety to form a complete compliance and safety program.

Frequently Asked Questions

SIST EN 13054:2002 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package". This standard covers: This standard specifies two methods of determining the location of the centre of gravity of flat sided rigid packages or unit loads. In the following text, a package or a unit load is called "a test item".

This standard specifies two methods of determining the location of the centre of gravity of flat sided rigid packages or unit loads. In the following text, a package or a unit load is called "a test item".

SIST EN 13054:2002 is classified under the following ICS (International Classification for Standards) categories: 55.180.40 - Complete, filled transport packages. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 13054:2002 is associated with the following European legislation: EU Directives/Regulations: 80/232/EEC, 87/356/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

You can purchase SIST EN 13054:2002 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackung - Versandfertige Packstücke - Prüfung zur Bestimmung des Schwerpunktes eines PackstückesEmballages - Emballages d'expédition complets et pleins - Méthodes d'essai pour la détermination du centre de gravité d'un emballagePackaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a pa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...