iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12809:2003/A1:2005/AC:2006

(Amendment)

Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods

Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods

Specifies requirements relating to the design, manufacture, construction, performance (efficiency and emission), safety, instructions and marking together with associated test methods and test fuels for type testing residential independent heating and hot water boilers fired by solid fuel.

Heizkessel für feste Brennstoffe - Nennwärmeleistung bis 50 kW - Anforderungen und Prüfungen

Chaudieres domestiques a combustible solide destinées a etre implantées dans le volume habitable - Puissance calorifique nominale inférieure ou égale a 50 kW - Exigences et méthodes d'essai

Grelni kotli na trdna goriva - Imenska grelna moč do 50 kW - Zahteve in preskusne metode - Popravek AC k dopolnilu A1

General Information

Status
Withdrawn
Publication Date
31-Oct-2006
Withdrawal Date
05-Mar-2008
ICS
91.140.10 - Central heating systems
97.100.30 - Solid fuel heaters
Technical Committee
OGS - Heating for buildings
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
05-Mar-2008
Due Date
28-Mar-2008
Completion Date
06-Mar-2008
Directive
89/106/EEC - Construction products
Mandate
M/129 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on space heating appliances
Ref Project
EN 12809:2001/A1:2004/AC:2006 - Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods

Relations

Corrects
SIST EN 12809:2003/A1:2005 - Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
Effective Date
01-Nov-2006
Replaced By
SIST EN 16510-2-4:2023 - Residential solid fuel burning appliances - Part 2-4: Independent boilers - Nominal heat output up to 50 kW
Effective Date
28-Dec-2022
Replaced By
SIST EN 16510-1:2023 - Residential solid fuel burning appliances - Part 1: General requirements and test methods
Effective Date
28-Dec-2022
Replaced By
SIST EN 12809:2003/A1:2005/AC:2008 - Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
Effective Date
01-Apr-2008

Buy Standard

EN 12809:2003/A1:2005/AC:2006EN 12809:2003/A1:2005/AC:2006
PreviousNext
Corrigendum
EN 12809:2003/A1:2005/AC:2006
English and German language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Heizkessel für feste Brennstoffe - Nennwärmeleistung bis 50 kW - Anforderungen und PrüfungenChaudieres domestiques a combustible solide destinées a etre implantées dans le volume habitable - Puissance calorifique nominale inférieure ou égale a 50 kW - Exigences et méthodes d'essaiResidential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods97.100.30Grelniki na trdo gorivoSolid fuel heaters91.140.10Sistemi centralnega ogrevanjaCentral heating systemsICS:Ta slovenski standard je istoveten z:EN 12809:2001/A1:2004/AC:2006SIST EN 12809:2003/A1:2005/AC:2006en,de01-november-2006SIST EN 12809:2003/A1:2005/AC:2006SLOVENSKI
STANDARD



SIST EN 12809:2003/A1:2005/AC:2006



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12809:2001/A1:2004/ACJune 2006Juin 2006Juni 2006ICS 91.140.10English versionVersion FrançaiseDeutsche FassungResidential independent boilers fired by solid fuel - Nominal heat output upto 50 kW - Requirements and test methodsChaudières domestiques à combustiblesolide destinées à être implantées dans levolume habitable - Puissance calorifiquenominale inférieure ou égale à 50 kW -Exigences et méthodes d'essaiHeizkessel für feste Brennstoffe -Nennwärmeleistung bis 50 kW -Anforderungen und PrüfungenThis corrigendum becomes effective on 21 June 2006 for inco
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
oSIST prEN 12809:2011(Main)
Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kw - Requirements and test methods
prEN 12809

This European Standard specifies requirements relating to the design, manufacture, construction, performance (efficiency and emission), safety, instructions and marking together with associated test methods and test fuels for type testing residential independent boilers fired by solid fuel.
This standard is applicable to hand and automatically fired appliances having nominal heat outputs up to 50 kW, the primary function of which is to provide hot water for central heating and/or domestic use, and which are designed for use only with open vented systems at a working pressure not exceeding 2 bar. In addition to their primary function of providing hot water these appliances also provide space heating to the place of installation. These appliances may burn either solid mineral fuels, peat briquettes or natural or manufactured wood logs or be multi-fuel in accordance with the appliance manufacturer’s instructions.
This standard is not applicable to independent boilers for hot water only production and having heat outputs of less than 5 kW.
This standard is also not applicable to the design and construction of automatic stoking devices.

  • Draft
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 303-5:2021+A1:2023(Main)
Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
EN 303-5:2021+A1:2022

1.1 General
This European Standard applies to heating boilers including safety devices up to a nominal heat output of 500 kW which are designed for the burning of solid fuels only and are operated according to the instructions of the boiler manufacturer.
This European Standard deals with significant hazards, hazardous situations and events relevant to heating boilers used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
The boilers may operate under natural draught or forced draught. The stoking may work manually or automatically.
The boilers may operate under room sealed conditions in case of supervised under pressure in the combustion chamber.
The boilers may operate in condensing condition.
NOTE This European Standard deals with boilers which are both within and outside of the scope of the Machinery
Directive 2006/42/EC.
This European Standard contains requirements and test methods for safety, combustion quality, operating characteristics, marking and maintenance of heating boilers and secondary emission reduction appliances and efficiency improvement appliances. It also covers all external equipment that influences the safety systems (e.g. back burning safety device, integral fuel hopper).
This European Standard covers only boilers that include burners as a unit. The standard applies to the combination of a boiler body with a solid fuel burner according to EN 15270 as a unit only when the whole unit is tested in accordance with this European Standard.
Heating boilers in accordance with this European Standard are designed for central heating installations where the heat carrier is water and the maximum allowable temperature is 110 °C, and which can operate at a maximum allowable operating pressure of 6 bars. For heating boilers with a built-in or attached water heater (storage or continuous flow heater), this European Standard only applies to those parts of the water heater which are necessarily subject to the operating conditions of the heating boiler (heating part).
This European Standard does not apply to:
heating boilers and other heating appliances which are also designed for the direct heating of the place of installation;
cooking appliances;
the design and construction of external fuel storage and transportation devices prior to the safety devices of the boiler;
room sealed applications above a nominal heat output > 70 kW or operated with positive pressure in the combustion chamber or operated under natural draught;
This European Standard specifies the necessary terminology for solid fuel heating boilers, the control and safety related requirements, the design requirements, the technical heating requirements (taking into account the environmental requirements) and testing, as well as the marking requirements.
This European Standard is not applicable to heating boilers which are tested before the date of its publication as an EN (European Standard).
1.2 Fuels
These boilers may burn either fossil fuels, biogenic fuels or other fuels such as peat, as specified for their use by the boiler manufacturer, in accordance with the requirements of this European Standard.
Solid fuels included in this European Standard are categorised as follows.
1.2.1 Biogenic fuels
Biomass in a natural state, in the form of:
Adaptation to new fuels standards and consideration of new fuels standards in preparation.
A log wood with moisture content w ≤ 25 %, according to EN 14961-5;
B1 chipped wood (wood chipped by machine, usually up to a maximum length of 15 cm) with moisture content from w 15 % to w 35 %, according to EN 14961-4;
B2 chipped wood as under B1, except with moisture content w > 35 %;
C1 compressed wood (e.g. pellets without additives, made of wood and/or bark particles; natural binding agents such as molasses, vegetable paraffins and starch are permitted), pellets according to EN 14961-2;
(...)

  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 12809:2011(Main)
Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kw - Requirements and test methods
prEN 12809

This European Standard specifies requirements relating to the design, manufacture, construction, performance (efficiency and emission), safety, instructions and marking together with associated test methods and test fuels for type testing residential independent boilers fired by solid fuel.
This standard is applicable to hand and automatically fired appliances having nominal heat outputs up to 50 kW, the primary function of which is to provide hot water for central heating and/or domestic use, and which are designed for use only with open vented systems at a working pressure not exceeding 2 bar. In addition to their primary function of providing hot water these appliances also provide space heating to the place of installation. These appliances may burn either solid mineral fuels, peat briquettes or natural or manufactured wood logs or be multi-fuel in accordance with the appliance manufacturer’s instructions.
This standard is not applicable to independent boilers for hot water only production and having heat outputs of less than 5 kW.
This standard is also not applicable to the design and construction of automatic stoking devices.

  • Draft
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-22:2023(Main)
Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)
EN ISO 3262-22:2023

This document specifies requirements and corresponding methods of test for flux-calcined kieselguhr.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18473-4:2023(Main)
Functional pigments and extenders for special applications - Part 4: Nanoscale titanium dioxide for photocatalytic application (ISO 18473-4:2022)
EN ISO 18473-4:2023

This document specifies requirements and corresponding test methods for nanoscale titanium dioxide (TiO2) in either powder or suspension form for photocatalytic application.
This document is applicable to modified nanoscale titanium dioxide for photocatalytic application. Such modification can be surface treatment, coating, doping and combination thereof.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-3:2023(Main)
Extenders - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:2023)
EN ISO 3262-3:2023

This document specifies requirements and corresponding methods of test for blanc fixe.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63044-4:2021/AC:2023(Corrigendum)
Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS
EN IEC 63044-4:2021/AC:2023-07
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 1247-1:2023(Main)
Aluminium pigments for paints - Part 1: General aluminium pigments (ISO 1247-1:2021)
EN ISO 1247-1:2023

This document specifies the requirements and corresponding test methods for aluminium pigments suitable for use in paints including:
a) general, decorative and protective paints, and
b) special finishing paints.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day