SIST EN 300 330-2:2001
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
- Abstract
To keep the existing published standard (1999) brought in line to the 99/5 Directive and the CEPT/ERC REC 70-03. Technical characteristics and test methods for Short Range Devcices, operating in the 9 KHz to 25 MHz and inductive loop systems in th efrequency range 9 kHz up to 30 MHz
- Status
- Published
- Publication Date
- 31-Aug-2001
- Technical Committee
- RES - Radio equipment and systems
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Sep-2001
- Due Date
- 01-Sep-2001
- Completion Date
- 01-Sep-2001
- Mandate
- M/284
SIST EN 300 330-2:2001 is the Slovenian adoption of ETSI EN 300 330-2 V1.1.1. It specifies harmonized radio spectrum requirements for Short Range Devices (SRDs) and inductive loop systems in the 9 kHz to 25 MHz / 30 MHz ranges, for use under article 3.2 of the R&TTE Directive.
What does SIST EN 300 330-2:2001 specify?
SIST EN 300 330-2:2001 sets the harmonized requirements for SRD transmitters and receivers so they can be assessed for use of the radio spectrum without harmful interference. It also ties the equipment to the test methods and limit values defined in Part 1.
The document applies to transmitters operating from 9 kHz to 25 MHz and inductive loop transmitters up to 30 MHz, and to receivers operating from 9 kHz to 30 MHz. It covers RF output connection equipment, integral antennas, fixed, mobile and portable stations, and systems used for alarms, identification, radio-determination, telecommand, telemetry and similar applications.
Its structure is straightforward:
- Clause 1 - Scope
- Clause 2 - References
- Clause 3 - Definitions, symbols and abbreviations
- Clause 4 - Technical requirement specifications
- Clause 5 - Testing for compliance with technical requirements
- Clause 6 - Interpretation of measurement results
What are the key requirements of SIST EN 300 330-2:2001?
SIST EN 300 330-2:2001 is mainly a compliance document: Clause 4 sets transmitter and receiver limits, and Clause 5 points to the test suites used to verify them. In practice, a manufacturer or test lab uses Part 1 for the detailed measurement methods and limit tables, then applies this part to decide whether a product fits the harmonized EN under article 3.2.
Transmitter requirements
Clause 4.1 covers transmitter performance. The radiated H-field, RF carrier current and radiated E-field must stay within the limits given in EN 300 330-1, and the permitted operating frequency range must also stay within the corresponding limits there. For a buyer or engineer, this means the transmitter must be checked in the actual antenna or output configuration used by the product.
Clause 4.1.2a requires control of spurious emissions, both conducted and radiated, below and above 30 MHz. Clause 4.1.3 limits duty cycle. These checks matter because they reduce interference outside the intended channel and help determine whether the device can be used under the intended licence or exemption conditions.
Receiver requirements
Clause 4.2 covers receiver selectivity, blocking or desensitization, and spurious radiations. Adjacent channel selectivity in-band applies to equipment class 1 receivers when invoked, while blocking or desensitization applies to class 1 and class 2 receivers when invoked. Spurious radiation limits apply to all receivers.
In practice, these requirements show whether a receiver keeps working when nearby signals are present and whether it avoids creating unwanted emissions itself.
Testing and measurement
Clause 5 states that test conditions are those declared by the manufacturer, and normal and extreme tests use the procedures in EN 300 330-1. It also identifies the relevant transmitter and receiver test suites. Clause 6 says the measured value is compared with the corresponding limit, and the measurement uncertainty must be reported separately.
What terms does SIST EN 300 330-2:2001 define?
The standard uses the definitions, symbols and abbreviations from the R&TTE Directive and EN 300 330-1. Key terms include:
- Short Range Devices (SRDs) - low-power radio equipment covered by this family of standards.
- Radio Frequency (RF) - the frequency range used for the radio signal and related tests.
- effective isotropically radiated power (e.i.r.p.) - a power-related way to express radiated output for some classes.
- H-field - the magnetic component used for low-frequency radiated field measurements.
- E-field - the electric component used for radiated emissions measurements.
- duty cycle - the proportion of time the transmitter is active.
- spurious emissions - unwanted emissions outside the intended signal.
Who uses SIST EN 300 330-2:2001?
Manufacturers of SRDs and inductive loop systems use this standard when designing products for the covered frequency ranges. Test laboratories use it to set up compliance measurements and record uncertainty. Conformity assessment teams, quality managers and regulators use it to check whether a product matches the harmonized requirements for spectrum use.
It is also relevant to equipment used in alarms, identification systems, radio-determination, telecommand and telemetry, especially where a product may be fixed, mobile or portable.
What changed in SIST EN 300 330-2:2001 from the previous edition?
SIST EN 300 330-2:2001 updates the earlier published 1999 standard to bring it into line with Directive 99/5/EC and CEPT/ERC Recommendation 70-03. It is presented as Part 2 of the multi-part deliverable for SRDs and inductive loop systems.
Which standards are used with SIST EN 300 330-2:2001?
- EN 300 330-1 - provides the technical characteristics, detailed test methods, and the limit tables referenced throughout this part.
- CEPT/ERC Recommendation 70-03 - provides the SRD usage framework that supports the power-class approach.
- Directive 1999/5/EC - provides the legal framework for the harmonized article 3.2 requirements.
- ETR 028 - provides the method used to calculate measurement uncertainty.
- Directive 98/34/EC - appears in the foreword as the mandate context for the standard.
What does the SIST EN 300 330-2:2001 document contain?
The document contains transmitter and receiver requirement clauses, test-suite references, and rules for interpreting measurement results. It also includes a power-class table, a table linking receiver requirements to test methods, and a table for measurement uncertainty.
The foreword explains the modular structure used under the R&TTE Directive, and the introduction places this part within that structure. The body of the document does not reproduce the detailed measurements and limit values in full - it points to EN 300 330-1 for those details and for the test procedures used in certification and compliance work.
Relations
- Effective Date
- 23-Nov-2009
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 300 330-2:2001 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive". This standard covers: To keep the existing published standard (1999) brought in line to the 99/5 Directive and the CEPT/ERC REC 70-03. Technical characteristics and test methods for Short Range Devcices, operating in the 9 KHz to 25 MHz and inductive loop systems in th efrequency range 9 kHz up to 30 MHz
To keep the existing published standard (1999) brought in line to the 99/5 Directive and the CEPT/ERC REC 70-03. Technical characteristics and test methods for Short Range Devcices, operating in the 9 KHz to 25 MHz and inductive loop systems in th efrequency range 9 kHz up to 30 MHz
SIST EN 300 330-2:2001 is classified under the following ICS (International Classification for Standards) categories: 33.060.20 - Receiving and transmitting equipment; 33.100.01 - Electromagnetic compatibility in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 300 330-2:2001 has the following relationships with other standards: It is inter standard links to SIST EN 300 330-2 V1.3.1:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 300 330-2:2001 is associated with the following European legislation: EU Directives/Regulations: 1999/5/EC, 2005-01-1864; Standardization Mandates: M/284. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 300 330-2:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HO577(Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 300 330-2 Version 1.1.1SIST EN 300 330-2:2001en01-september-2001SIST EN 300 330-2:2001SLOVENSKI
STANDARD
ETSIEN300330-2V1.1.1(2001-06)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)ElectromagneticcompatibilityandRadiospectrumMatters(ERM);ShortRangeDevices(SRD);Radioequipmentinthefrequencyrange9kHzto25MHzandinductiveloopsystemsinthefrequencyrange9kHzto30MHz;Part2:HarmonizedENunderarticle3.2oftheR&TTEDirectiveSIST EN 300 330-2:2001
ETSIETSIEN300330-2V1.1.1(2001-06)2ReferenceREN/ERM-RP08-0405-2Keywordsradio,regulation,SRD,testingETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2001.Allrightsreserved.SIST EN 300 330-2:2001
ETSIETSIEN300330-2V1.1.1(2001-06)3ContentsIntellectualPropertyRights.4Foreword.4Introduction.51Scope.72References.83Definitions,symbolsandabbreviations.83.1Definitions.83.2Symbols.83.3Abbreviations.84Technicalrequirementsspecifications.94.1Transmitterrequirements.94.1.1Radiatedfieldstrengthorpower.94.1.1.1RadiatedH-field.94.1.1.2RFcarriercurrent.94.1.1.3RadiatedE-field.94.1.2Permittedrangeofoperatingfrequencies.94.1.2aSpuriousemissions.94.1.2.1Conductedspuriousemissionsbelow30MHz.94.1.2.2Conductedspuriousemissionsabove30MHz.94.1.2.3Radiatedspuriousemissionsbelow30MHz.94.1.2.4Radiatedspuriouspowerabove30MHz.94.1.3Dutycycle.104.2Receiverrequirements.104.2.1Adjacentchannelselectivity-inband.104.2.2Blockingordesensitization.104.2.3Receiverspuriousradiations.104.2.3.1Radiatedemissionsbelow30MHz.104.2.3.2Radiatedemissionsabove30MHz.105Testingforcompliancewithtechnicalrequirements.105.1Essentialradiotestsuites.105.1.2Normalandextremetest-conditions.105.1.3Testpowersource.105.1.3aChoiceofsamplesfortestsuites.115.1.4Transmittertestsuites.115.1.4.1EffectiveradiatedH-field,carriercurrentorradiatedpower.115.1.4.2Permittedfrequencyrangeofthemodulationbandwidth:.115.1.4.3Spuriousemissions.115.2Othertestspecifications.115.2.1Receivertestsuites.125.2.2Spuriousradiations.126Interpretationofmeasurementresults.12History.13SIST EN 300 330-2:2001
ETSIETSIEN300330-2V1.1.1(2001-06)4IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisCandidateHarmonizedEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeElectromagneticcompatibilityandRadiospectrumMatters(ERM).ThepresentdocumenthasbeenproducedbyETSIinresponsetoamandatefromtheEuropeanCommissionissuedunderCouncilDirective98/34/EC[5]layingdownaprocedurefortheprovisionofinformationinthefieldoftechnicalstandardsandregulations.ThepresentdocumentisintendedtobecomeaHarmonizedStandard,thereferenceofwhichwillbepublishedintheOfficialJournaloftheEuropeanCommunitiesreferencingtheDirective1999/5/EC[1]oftheEuropeanParliamentandoftheCouncilof9March1999onradioequipmentandtelecommunicationsterminalequipmentandthemutualrecognitionoftheirconformity("theR&TTEDirective").Thepresentdocumentispart2ofamulti-partdeliverablecoveringtheShortRangeDevices(SRD);Radioequipmentinthefrequencyrange9kHzto25MHzandinductiveloopsystemsinthefrequencyrange9kHzto30MHz,asidentifiedbelow:Part1:"Technicalcharacteristicsandtestmethods";Part2:"HarmonizedENunderarticle3.2oftheR&TTEDirective".NationaltranspositiondatesDateofadoptionofthisEN:15June2001DateoflatestannouncementofthisEN(doa):30September2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31March2002DateofwithdrawalofanyconflictingNationalStandard(dow):31March2003SIST EN 300 330-2:2001
ETSIETSIEN300330-2V1.1.1(2001-06)5IntroductionThepresentdocumentispartofasetofstandardsdesignedtofitinamodularstructuretocoverallradioandtelecommunicationsterminalequipmentundertheR&TTEDirective[1].Eachstandardisamoduleinthestructure.Themodularstructureisshowninfigure1.NewstandardforHealthforradio(ifneeded)Useofspectrum*IfneededScopedbyequipmentclassortypeScopedbyfrequencyand/orequipmenttypeDisability*Privacy*Fraud*Noharmtothenetwork*Emergency*Inter-workingviathenetwork*Inter-workingwiththenetworkNon-radioRadio(RE)Non-TTETTE3.1a/b3.23.3c3.3b3.3a3.3d3.3e3.3fRadioproductEMCProposedsinglestandardStandardsnotifiedunderEMCDirectiveStandardsnotifiedunderLVDDirective(inclacousticsafetyifneeded)Figure1:ModularstructureforthevariousstandardsusedundertheR&TTEDirectiveSIST EN 300 330-2:2001
ETSIETSIEN300330-2V1.1.1(2001-06)6Thelefthandedgeofthefigureshowsthedifferentclausesofarticle3oftheDirective.Theverticalboxesshowthestandardsunderarticle3.2fortheuseoftheradiospectrum.Thescopesofthesestandardsarespecifiedeitherbyfrequency(normallyinthecasewherefrequencybandsareharmonized)orbyradioequipmenttype.Forarticle3.3varioushorizontalboxesareshown.Theirdottedlinesindicatethatessentialrequirementsintheseareashavetobea
...