SIST EN ISO 11363-1:2018/A1:2023
(Amendment)Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
Gasflaschen - 17E und 25E kegeliges Gewinde zur Verbindung von Ventilen mit Gasflaschen - Teil 1: Spezifikationen - Änderung 1 (ISO 11363-1:2018/Amd 1:2023)
No scope available
Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz - Partie 1: Spécifications - Amendement 1 (ISO 11363-1:2018/Amd 1:2023)
Plinske jeklenke - Konična navoja 17E in 25E za priključitev ventila na plinsko jeklenko - 1. del: Specifikacije - Dopolnilo A1 (ISO 11363-1:2018/Amd 1:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11363-1:2018/A1:2023
01-november-2023
Plinske jeklenke - Konična navoja 17E in 25E za priključitev ventila na plinsko
jeklenko - 1. del: Specifikacije - Dopolnilo A1 (ISO 11363-1:2018/Amd 1:2023)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders -
Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
Gasflaschen - 17E und 25E kegeliges Gewinde zur Verbindung von Ventilen mit
Gasflaschen - Teil 1: Spezifikationen - Änderung 1 (ISO 11363-1:2018/Amd 1:2023)
Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur
les bouteilles à gaz - Partie 1: Spécifications - Amendement 1 (ISO 11363-1:2018/Amd
1:2023)
Ta slovenski standard je istoveten z: EN ISO 11363-1:2018/A1:2023
ICS:
21.040.30 Posebni navoji Special screw threads
23.020.35 Plinske jeklenke Gas cylinders
SIST EN ISO 11363-1:2018/A1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11363-1:2018/A1:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 11363-1:2018/A1:2023
EN ISO 11363-1:2018/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2023
EUROPÄISCHE NORM
ICS 23.020.35
English Version
Gas cylinders - 17E and 25E taper threads for connection
of valves to gas cylinders - Part 1: Specifications -
Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
Bouteilles à gaz - Filetages coniques 17E et 25E pour le Gasflaschen - 17E und 25E kegeliges Gewinde zur
raccordement des robinets sur les bouteilles à gaz - Verbindung von Ventilen mit Gasflaschen - Teil 1:
Partie 1: Spécifications - Amendement 1 (ISO 11363- Spezifikationen - Änderung 1 (ISO 11363-1:2018/Amd
1:2018/Amd 1:2023) 1:2023)
This amendment A1 modifies the European Standard EN ISO 11363-1:2018; it was approved by CEN on 20 May 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11363-1:2018/A1:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11363-1:2018/A1:2023
EN ISO 11363-1:2018/A1:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11363-1:2018/A1:2023
EN ISO 11363-1:2018/A1:2023 (E)
European foreword
This document (EN ISO 11363-1:2018/A1:2023) has been prepared by Technical Committee ISO/TC 58
"Gas cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the
secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 11363-1:2018 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by February 2024,
and conflicting national standards shall be withdrawn at the latest by February 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark,
...
SLOVENSKI STANDARD
SIST EN ISO 11363-1:2018/oprA1:2023
01-marec-2023
Plinske jeklenke - Konična navoja 17E in 25E za priključitev ventila na plinsko
jeklenko - 1. del: Specifikacije - Dopolnilo A1 (ISO 11363-1:2018/DAM 1:2023)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders -
Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/DAM 1:2023)
Gasflaschen - 17E und 25E kegeliges Gewinde zur Verbindung von Ventilen mit
Gasflaschen - Teil 1: Spezifikationen - Änderung 1 (ISO 11363‑1:2018/DAM 1:2023)
Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur
les bouteilles à gaz - Partie 1: Spécifications - Amendement 1 (ISO 11363-1:2018/DAM
1:2023)
Ta slovenski standard je istoveten z: EN ISO 11363-1:2018/prA1
ICS:
21.040.30 Posebni navoji Special screw threads
23.020.35 Plinske jeklenke Gas cylinders
SIST EN ISO 11363-1:2018/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11363-1:2018/oprA1:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 11363-1:2018/oprA1:2023
DRAFT AMENDMENT
ISO 11363-1:2018/DAM 1
ISO/TC 58/SC 2 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2023-01-25 2023-04-19
Gas cylinders — 17E and 25E taper threads for connection
of valves to gas cylinders —
Part 1:
Specifications
AMENDMENT 1
Bouteilles à gaz — Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à
gaz —
Partie 1: Spécifications
AMENDEMENT 1
ICS: 23.020.35
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 11363-1:2018/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
SIST EN ISO 11363-1:2018/oprA1:2023
ISO 11363-1:2018/DAM 1:2023(E)
DRAFT AMENDMENT
ISO 11363-1:2018/DAM 1
ISO/TC 58/SC 2 Secretariat: AFNOR
Voting begins on: Voting terminates on:
Gas cylinders — 17E and 25E taper threads for connection
of valves to gas cylinders —
Part 1:
Specifications
AMENDMENT 1
Bouteilles à gaz — Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à
gaz —
Partie 1: Spécifications
AMENDEMENT 1
ICS: 23.020.35
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO 11363-1:2018/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
SIST EN ISO 11363-1:2018/oprA1:2023
ISO 11363-1:2018/DAM 1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be rep
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.