Gas infrastructure - Injection stations - Part 3: Specific requirements regarding the injection of hydrogen

This document describes specific functional requirements of stations for the injection of hydrogen fuel gas into transmission and distribution systems for fuel gases (natural gas, biomethane, SNG, hydrogen fuel gas, fuel gas mixtures, etc.) in accordance with European technical rules that ensure the interoperability of systems in addition to the general functional requirements of EN xxxxx-1 (WI 00234087).
This standard complements Part 1 by specifying the technical safety requirements to be observed in respect of the chemical and physical properties of hydrogen fuel gas. It furthermore complements the requirements on pipelines specified in EN 12007-3 and EN 1594 by describing the specific requirements in respect of hydrogen. Additionally, it explains how to handle hydrogen measurements during the course of injection.
This document represents the state of the art at the time of its preparation. This document does not apply to injection stations operating prior to the publication of this European Standard.
This standard specifies common basic principles for gas infrastructure. Users of this document are expected to be aware of more detailed national standards and/or codes of practice in the CEN member countries. This document is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles.
In the event of conflicts in terms of more restrictive requirements in national legislation/regulation with the requirements of this document, the national legislation/regulation takes precedence as illustrated in CEN/TR 13737 (all parts).
CEN/TR 13737 (all parts) gives:
— clarification of all legislations/regulations applicable in a member state;
— if appropriate, more restrictive national requirements;
— a national contact point for the latest information.

Gasinfrastruktur - Einspeiseanlagen - Part 3: Spezifische Anforderungen für die Einspeisung von Wasserstoff

Infrastructures gazières - Stations d'injection - Partie 3 : Exigences spécifiques concernant l'injection de gaz combustible hydrogène

Le présent document établit des exigences fonctionnelles spécifiques pour les stations d'injection de gaz combustible hydrogène dans les réseaux de transport et de distribution de gaz combustible (gaz naturel, biométhane, GNS, gaz combustible hydrogène, mélanges de gaz combustibles, etc. ; voir la Figure 1) conformément aux règles techniques européennes qui assurent l'interopérabilité des systèmes, en plus des exigences fonctionnelles générales du prEN 17928-1.
Le présent document complète le prEN 17928-1 en spécifiant les exigences techniques de sécurité à respecter en ce qui concerne les propriétés chimiques et physiques du gaz combustible hydrogène.
De plus, il complète les exigences relatives aux canalisations spécifiées dans l'EN 12007-3 et l'EN 1594 en décrivant les exigences spécifiques relatives à l'hydrogène.
Il explique en outre comment réaliser les mesures d'hydrogène au cours de l'injection.
Le présent document ne couvre pas les exigences relatives à l'équipement technique qui mélange l'hydrogène, en tant que gaz d'addition, dans l'écoulement de gaz du réseau de transport et de distribution de gaz. Toutefois, les exigences relatives au mélange de gaz résultant sont spécifiées en 5.2, où sont précisées les exigences relatives à l'exploitation de la station d'injection.
Le présent document représente les recommandations en vigueur au moment de son élaboration. Le présent document ne s'applique pas aux stations d'injection en fonctionnement avant la publication du présent document.
Le présent document spécifie les principes de base communs pour les infrastructures gazières. Il convient que les utilisateurs du présent document gardent à l'esprit l'existence éventuelle, dans les pays membres du CEN, de codes de pratique et/ou de Normes nationales plus détaillés. Le présent document est destiné à être appliqué conjointement avec ces normes nationales et/ou codes de pratique, qui détaillent les principes de base précités.
Si la législation/réglementation nationale contient des termes relatifs à des exigences supplémentaires, en plus de ceux du présent document, le CEN/TR 13737 (toutes les parties) illustre ces termes.
Le CEN/TR 13737 (toutes les parties) donne :
- la législation/les réglementations applicables dans un État membre ;
- si applicable, des exigences nationales plus contraignantes ;
- un point de contact national pour les informations les plus récentes.

Infrastruktura za plin - Postaje za injiciranje - 3. del: Posebne zahteve za injiciranje vodika

General Information

Status
Not Published
Public Enquiry End Date
02-Jun-2023
Technical Committee
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
22-Apr-2024
Due Date
10-Jun-2024

Buy Standard

Draft
prEN 17928-3:2023
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 17928-3:2023
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 17928-3:2023
01-maj-2023
Infrastruktura za plin - Postaje za injiciranje - 3. del: Posebne zahteve za plinasti
vodik
Gas infrastructure - Injection stations - Part 3: Specific requirements regarding the
injection of hydrogen fuel gas
Gasinfrastruktur - Einspeiseanlagen - Part 3: Spezifische Anforderungen für die
Einspeisung von Wasserstoff
Installation pour l'injection de gaz renouvelable dans les reseaux de gaz naturel - Partie
3: Exigences spécifiques pour hydrogen
Ta slovenski standard je istoveten z: prEN 17928-3
ICS:
27.190 Biološki viri in drugi Biological sources and
alternativni viri energije alternative sources of energy
75.180.01 Oprema za industrijo nafte in Equipment for petroleum and
zemeljskega plina na splošno natural gas industries in
general
oSIST prEN 17928-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17928-3:2023

---------------------- Page: 2 ----------------------
oSIST prEN 17928-3:2023


DRAFT
EUROPEAN STANDARD
prEN 17928-3
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2023
ICS 27.190
English Version

Gas infrastructure - Injection stations - Part 3: Specific
requirements regarding the injection of hydrogen fuel gas
Installation pour l'injection de gaz renouvelable dans Gasinfrastruktur - Einspeiseanlagen - Part 3:
les reseaux de gaz naturel - Partie 1: Exigences Spezifische Anforderungen für die Einspeisung von
spécifiques pour hydrogen Wasserstoff
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 234.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17928-3:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17928-3:2023
prEN 17928-3:2023
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 5
3 Terms, symbols, units, and abbreviations . 5
4 General requirements . 5
4.1 Specific requirements for hydrogen injection stations . 5
4.2 Coordination and definition of interfaces . 6
4.3 Requirements on the properties of hydrogen fuel gas . 6
4.3.1 General . 6
4.3.2 Injection for hydrogen fuel gas in methane-based grids .
...

SLOVENSKI STANDARD
oSIST prEN 17928-3:2023
01-maj-2023
Infrastruktura za plin - Postaje za injiciranje - 3. del: Posebne zahteve za plinasti
vodik
Gas infrastructure - Injection stations - Part 3: Specific requirements regarding the
injection of hydrogen fuel gas
Gasinfrastruktur - Einspeiseanlagen - Part 3: Spezifische Anforderungen für die
Einspeisung von Wasserstoff
Installation pour l'injection de gaz renouvelable dans les reseaux de gaz naturel - Partie
3: Exigences spécifiques pour hydrogen
Ta slovenski standard je istoveten z: prEN 17928-3
ICS:
27.190 Biološki viri in drugi Biological sources and
alternativni viri energije alternative sources of energy
oSIST prEN 17928-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17928-3:2023

---------------------- Page: 2 ----------------------
oSIST prEN 17928-3:2023


DRAFT
EUROPEAN STANDARD
prEN 17928-3
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2023
ICS 27.190
English Version

Gas infrastructure - Injection stations - Part 3: Specific
requirements regarding the injection of hydrogen fuel gas
Installation pour l'injection de gaz renouvelable dans Gasinfrastruktur - Einspeiseanlagen - Part 3:
les reseaux de gaz naturel - Partie 1: Exigences Spezifische Anforderungen für die Einspeisung von
spécifiques pour hydrogen Wasserstoff
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 234.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17928-3:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17928-3:2023
prEN 17928-3:2023
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 5
3 Terms, symbols, units, and abbreviations . 5
4 General requirements . 5
4.1 Specific requirements for hydrogen injection stations . 5
4.2 Coordination and definition of interfaces . 6
4.3 Requirements on the properties of hydrogen fuel gas . 6
4.3.1 General . 6
4.3.2 Injection for hydrogen fuel gas in methane-based grids . 6
4.3.3 Requirements for injection into dedicated hydrogen grids .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.