SIST EN IEC 62115:2020/oprAB:2026

SLOVENSKI STANDARD
01-marec-2026
Električne igrače - Varnost - Dopolnilo AB
Electric toys - Safety
Elektrische Spielzeuge - Sicherheit
Jouets électriques - Sécurité
Ta slovenski standard je istoveten z: EN IEC 62115:2020/prAB:2026
ICS:
13.120 Varnost na domu Domestic safety
97.200.50 Igrače Toys
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD DRAFT
EN IEC 62115:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAB
January 2026
ICS 13.120; 97.200.50 -
English Version
Electric toys - Safety
Jouets électriques - Sécurité Elektrische Spielzeuge - Sicherheit
This draft amendment prAB, if approved, will modify the European Standard EN IEC 62115:2020; it is submitted to CENELEC members for
enquiry.
Deadline for CENELEC: 2026-04-10.

It has been drawn up by CLC/TC 61.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 80557 Ref. No. EN IEC 62115:2020/prAB:2026 E

Contents Page
1 European foreword . 3
2 1 Modification to the Introduction . 4
3 2 Modifications to the Scope . 4
4 3 Modification to Clause 2, “Normative references” . 4
5 4 Modification to Clause 5, “General conditions for tests” . 4
6 5 Modifications to Clause 7, “Markings on electric toys” . 4
7 6 Modifications to Clause 13, “Construction” . 4
8 7 Modifications to Clause 15, “Components” . 5
9 8 Modification to annexes . 5
10 9 Modifications to the Bibliography .14
11 European foreword
12 This document EN IEC 62115:2020/prAB:2026 has been prepared by CLC/TC/61 "Safety of household and
13 similar electrical appliances".
14 This document is currently submitted to the Enquiry.
15 The following dates are proposed:
• latest date by which the existence of this (doa) dav + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dav + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
16 This document is read in conjunction with EN IEC 62115:2020, EN IEC 62115:2020/A11:2020 and EN IEC
17 62115:2020/FprA1:2025.
18 EN IEC 62115:2020/FprAB:2025 includes the following significant technical modifications:
19 — Update date reference;
20 The numbering system for European clauses, subclauses, notes, tables, figures and annexes that are additional
21 to those in the IEC standard are prefixed with the letter “Z”.
22 This document has been prepared under a standardization request addressed to CENELEC by the European
23 Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
24 Member States.
25 For the relationship with EU Legislation, see informative Annex ZZ, which is an integral part of this document
26 1 Modification to the Introduction
27 Addition:
28 This European Amendment A12 supplements or modifies the corresponding clauses of the standards below:
29 — EN IEC 62115:2020, EN IEC 62115:2020/A11:2020 and EN IEC 62115:2020/FprA1:20251
30 2 Modifications to the Scope
31 In Note 3, replace “EN 61558-2-7:2007” with “EN IEC 61558-2-7:2025”.
32 In Note 3, replace “EN 61558-2-16:2013” with “EN 61558-2-16:2025”.
33 In Note 3, replace “EN 60335-2-29:2010” with “EN 60335-2-29:2021” (twice).
34 3 Modification to Clause 2, “Normative references”
35 Delete the reference to IEC TR 60083.
36 Delete the reference to IEC 62133.
37 Add the following references:
38 EN 62133-1:2017, Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety
39 requirements for portable sealed secondary cells, and for batteries made from them, for use in portable
40 applications - Part 1: Nickel systems
41 EN 62133-2:2017, Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety
42 requirements for portable sealed secondary cells, and for batteries made from them, for use in portable
43 applications - Part 2: Lithium systems
44 EN 71-1:2014+A1:2018, Safety of toys - Part 1: Mechanical and physical properties
45 4 Modification to Clause 5, “General conditions for tests”
46 In 5.7.2, fourth paragraph, replace “IEC 62133” with “EN 62133-1:2017 or EN 62133-2:2017”.
47 5 Modifications to Clause 7, “Markings on electric toys”
48 In 7.2.1, replace the note and list items with the following:
49 “NOTE  The legal requirements related to the markings of the toys can be found in Directive 2009/48/EC and in the
50 associated European Commission guidance documents on toys.”
51 In 7.3.3.4, replace “5.2 of ISO 8124-1:2014” with “8.2 of EN 71-1:2014+A1:2018”.
52 6 Modifications to Clause 13, “Construction”
53 In 13.4.1:
54 replace “5.2 of ISO 8124-1:2014” with “8.2 of EN 71-1:2014+A1:2018”,
55 replace “EN 60335-1:2012+A12+A13” with “EN IEC 60335-1:2023 ”, and

PR=79952 EN IEC 62115:2020/FprA1:2025 will be published together with PR=80557
EN IEC 62115:2020/A12:2025.
As impacted by EN 62133-2:2017/A1:2021 and EN 62133-2:2017/A1:2021/AC:2022-01.
As impacted by EN IEC 60335-1:2023/A11:2023.
56 replace “EN 60086-2:2016” with “EN IEC 60086-2:2021 ”.
57 In 13.4.2, replace “ISO 8124-1:2014” with “EN 71-1:2014+A1:2018”.
58 In 13.5, first paragraph, delete “listed in IEC TR 60083”.
60 7 Modifications to Clause 15, “Components”
61 In 15.5:
62 replace “5.2 of ISO 8124-1:2014” with ‘8.2 of EN 71-1:2014+A1:2018” and
63 replace “IEC 62133” with “EN 62133-1:2017 or EN 62133-2:2017”.
64 8 Modification to annexes
As impacted by EN IEC 60086-2:2021/AC:2022-07.
65 Annex ZA
66 (normative)
68 Normative references to international publications with their
69 corresponding European publications
70 The following documents are referred to in the text in such a way that some or all of their content constitutes
71 requirements of this document. For dated references, only the edition cited applies. For undated references, the
72 latest edition of the referenced document (including any amendments) applies.
73 NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
74 relevant EN/HD applies.
75 NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
76 www.cencenelec.eu.
77 Delete the reference to IEC TR 60083.
78 Delete the reference to IEC 62133.
79 Replace the following standards:
Publication Year Title EN/HD Year
IEC 60086-2 2015 Primary batteries – Part 2: Physical and EN IEC 60086-2 2021
electrical specifications
+ AC 2022
IEC 60086 series Primary batteries – Part1: General EN IEC 60086-1 2021
+ AC 2022-
Primary batteries – Part 3: Watch batteries EN IEC 60086-3 2021
+ AC 2023-
Primary batteries – Part 4: Safety of lithium EN IEC 60086-4 2025
batteries
Primary batteries – Part 5: Safety of batteries EN IEC 60086-5 2021
with aqueous electrolyte
+ AC 2022-
Primary batteries – Part 6: Guidance on EN IEC 60086-6 2020
environmental aspects
IEC 60335-1 2010 Household and similar electrical appliances – EN IEC 60335-1 2023
Safety – Part 1: General requirements
+ A1 2013
+ A2 2016
- - + A11 2023
IEC 60335-2-29 2016 Household and similar electrical appliances – EN 60335-2-29 2021
Safety – Part 2-29: Particular requirements for
battery chargers
+ A1 2021
+ A11 2024
IEC 60384-14 2013 Fixed capacitors for use in electronic equipment EN IEC 60384-14 2023
– Part 14: Sectional specification – Fixed
capacitors for electromagnetic interference

suppression and connection to the supply
mains
+ AC 2024
+ A1 2025
IEC 60417 2025 Graphical symbols for use on equipment – 12- - -
month subscription to regularly updated online
database comprising all graphical symbols
published in IEC 60417
IEC 60695-2-11 - Fire hazard testing – Part 2-11: Glowing/hot- EN IEC 60695-2-11 2021
wire based test methods – Glow-wire
flammability test method for end-products
(GWEPT)
IEC 60695-2-13 - Fire hazard testing - Part 2-13: Glowing/hot-wire EN IEC 60695-2-13 2021
based test methods - Glow-wire ignition
temperature (GWIT) test method for materials
IEC 60730-1 2013 Automatic electrical controls – Part 1: General EN IEC 60730-1 2024
requirements
+ A1 2015
- - + A11 2024
IEC 60730 series Automatic electrical controls for household and EN 60730-2-3 2007
similar use – Part 2-3: Particular requirements
for thermal protectors for ballasts for tubular
fluorescent lamps
Automatic electrical controls - Part 2-5: EN 60730-2-5 2015
Particular requirements for electrical burner
control systems
+ A1 2019
+ A2 2021
+ AC 2023
Automatic electrical controls - Part 2-6: EN IEC 60730-6 2025
Particular requirements for automatic electrical
pressure sensing controls including mechanical
requirements
Automatic electrical controls - Part 2-7: EN IEC 60730-2-7 2020
Particular requirements for timers and time
switches
Automatic electrical controls for household and EN IEC 60730-2-8 2025
similar use - Part 2-8: Particular requirements
for electrically operated water valves, including
mechanical requirements
Automatic electrical controls - Part 2-9: EN IEC 60730-2-9 2019
Particular requirements for temperature
sensing control.
+ A1 2019
+ A2 2020
Automatic electrical controls for household and IEC EN 60730-2-10 2007
similar use - Part 2-10: Particular requirements
for motor-starting relays
Automatic electrical controls - Part 2-11: IEC EN 60730-2-11 2025
Particular requirements for energy regulators

Automatic electrical control
...