SIST EN 61000-4-13:2003/A2:2016
(Amendment)Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
This part of IEC 61000 defines the immunity test methods and range of recommended basic
test levels for electrical and electronic equipment with rated current up to 16 A per phase at
disturbance frequencies up to and including 2 kHz (for 50 Hz mains) and 2,4 kHz (for 60 Hz
mains) for harmonics and interharmonics on low voltage power networks.
It does not apply to electrical and electronic equipment connected to 16 2/3 Hz , or to 400 Hz
a.c. networks. Tests for these networks will be covered by future standards.
The object of this standard is to establish a common reference for evaluating the functional
immunity of electrical and electronic equipment when subjected to harmonics and interharmonics
and mains signalling frequencies. The test method documented in this part of IEC
61000 describes a consistent method to assess the immunity of an equipment or system
against a defined phenomenon. As described in IEC guide 107, this is a basic EMC publication
for use by product committees of the IEC. As also stated in Guide 107, the IEC product
committees are responsible for determining whether this immunity test standard should be
applied or not, and if applied, they are responsible for determining the appropriate test levels
and performance criteria. TC 77 and its sub-committees are prepared to co-operate with
product committees in the evaluation of the value of particular immunity tests for their products.
The verification of the reliability of electrical components (for example capacitors, filters, etc.)
is not in the scope of the present standard. Long term thermal effects (greater than 15 min) are
not considered in this standard.
The levels proposed are more adapted for residential, commercial and light industry
environments. For heavy industrial environments the product committees are responsible for
the definition of a class X with the necessary levels. They have also the possibility of defining
more complex waveforms for their own need. Nevertheless, the simple waveforms proposed
have been mainly observed on several networks (flat curve more often for single phase
system) and also on industrial networks (overswing curve more for three phase systems).
Elektromagnetische Verträglichkeit (EMV) - Teil 4-13: Prüf- und Messverfahren - Prüfungen der Störfestigkeit am Wechselstrom-Netzanschluss gegen Oberschwingungen und Zwischenharmonische einschließlich leitungsgeführter Störgrößen aus der Signalübertragung auf elektrischen Niederspannungsnetzen
Compatibilité électromagnétique (CEM) - Partie 4-13: Techniques d'essai et de mesure - Essais d'immunité basse fréquence aux harmoniques et inter-harmoniques incluant les signaux transmis sur le réseau électrique alternatif
Elektromagnetna združljivost (EMC) - 4-13. del: Preskusne in merilne tehnike - Harmoniki in medharmoniki, vključno z napetostnimi signali v omrežju, na vhodu za izmenično napajanje; nizkofrekvenčni preskus odpornosti - Dopolnilo A2
Ta del standarda IEC 61000 določa metode za preskus odpornosti in obseg priporočenih osnovnih preskusnih ravni za električno in elektronsko opremo z nazivnim tokom največ 16 A na fazo pri motečih frekvencah največ 2 kHz (za omrežja s frekvenco 50 Hz) ter 2,4 kHz (za omrežja s frekvenco 60 Hz) za harmonike in medharmonike v nizkonapetostnih električnih omrežjih. Ne uporablja se za električno in elektronsko opremo, povezano z omrežjem 16 2/3 Hz ali 400 Hz (izmenični tok). Preskusi za ta omrežja bodo zajeti v prihodnjih standardih. Namen tega standarda je določiti skupno referenco za ocenjevanje funkcionalne odpornosti električne in elektronske opreme pri izpostavljenosti harmonikom in medharmonikom ter frekvencam napetostnih signalov v omrežju. Preskusna metoda, dokumentirana v tem delu standarda IEC 61000, opisuje skladno metodo za oceno odpornosti opreme ali sistema proti opredeljenemu pojavu. To je osnovna objava o elektromagnetni združljivosti, ki jo uporabljajo tehnični odbori v okviru Mednarodne elektrotehniške komisije (IEC), kot je opisano v vodilu 107 Mednarodne elektrotehniške komisije. Poleg tega je v vodilu 107 navedeno, da so tehnični odbori v okviru Mednarodne elektrotehniške komisije odgovorni za določitev morebitne uporabe tega standarda s preskusom odpornosti, v primeru uporabe pa so odgovorni za določitev ustreznih preskusnih ravni in meril učinkovitosti. Odbor TC 77 in njegovi pododbori so pripravljeni za sodelovanje s tehničnimi odbori pri vrednotenju posameznih preskusov odpornosti za ustrezne izdelke. Preverjanje zanesljivosti električnih komponent (npr. kondenzatorjev, filtrov itd.) je zunaj področja uporabe trenutnega standarda. Ta standard ne obravnava dolgoročnih toplotnih učinkov (več kot 15 min).
Predlagane ravni so bolj prilagojene za stanovanjska, poslovna in manj zahtevna industrijska okolja. Za zahtevna industrijska okolja so tehnični odbori odgovorni za določitev razreda X s potrebnimi ravnmi. Za svoje potrebe lahko določijo tudi bolj zapletene valovne oblike. Vendar v številnih omrežjih (ravna krivulja pogosteje za enofazni sistem) in tudi industrijskih omrežjih (zaobljena krivulja pogosteje za trifazne sisteme) je bilo mogoče opaziti v glavnem predlagane preproste valovne oblike.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61000-4-13:2003/A2:2016
01-maj-2016
(OHNWURPDJQHWQD]GUXåOMLYRVW (0& GHO 3UHVNXVQHLQPHULOQHWHKQLNH
+DUPRQLNLLQPHGKDUPRQLNLYNOMXþQR]QDSHWRVWQLPLVLJQDOLYRPUHåMXQDYKRGX
]DL]PHQLþQRQDSDMDQMH QL]NRIUHNYHQþQLSUHVNXVRGSRUQRVWL'RSROQLOR$
Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques -
Harmonics and interharmonics including mains signalling at a.c. power port, low
frequency immunity tests
Elektromagnetische Verträglichkeit (EMV) - Teil 4-13: Prüf- und Messverfahren -
Prüfungen der Störfestigkeit am Wechselstrom-Netzanschluss gegen
Oberschwingungen und Zwischenharmonische einschließlich leitungsgeführter
Störgrößen aus der Signalübertragung auf elektrischen Niederspannungsnetzen
Compatibilité électromagnétique (CEM) - Partie 4-13: Techniques d'essai et de mesure -
Essais d'immunité basse fréquence aux harmoniques et inter-harmoniques incluant les
signaux transmis sur le réseau électrique alternatif
Ta slovenski standard je istoveten z: EN 61000-4-13:2002/A2:2016
ICS:
33.100.20 Imunost Immunity
SIST EN 61000-4-13:2003/A2:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61000-4-13:2003/A2:2016
---------------------- Page: 2 ----------------------
SIST EN 61000-4-13:2003/A2:2016
EUROPEAN STANDARD EN 61000-4-13:2002/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2016
ICS 33.100.20
English Version
Electromagnetic compatibility (EMC) - Part 4-13: Testing and
measurement techniques - Harmonics and interharmonics
including mains signalling at a.c. power port, low frequency
immunity tests
(IEC 61000-4-13:2002/A2:2015)
Compatibilité électromagnétique (CEM) - Partie 4-13: Elektromagnetische Verträglichkeit (EMV) - Teil 4-13: Prüf-
Techniques d'essai et de mesure - Essais d'immunité basse und Messverfahren - Prüfungen der Störfestigkeit am
fréquence aux harmoniques et inter-harmoniques incluant Wechselstrom-Netzanschluss gegen Oberschwingungen
les signaux transmis sur le réseau électrique alternatif und Zwischenharmonische einschließlich leitungsgeführter
(IEC 61000-4-13:2002/A2:2015) Störgrößen aus der Signalübertragung auf elektrischen
Niederspannungsnetzen
(IEC 61000-4-13:2002/A2:2015)
This amendment A2 modifies the European Standard EN 61000-4-13:2002; it was approved by CENELEC on 2016-01-18. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61000-4-13:2002/A2:2016 E
---------------------- Page: 3 ----------------------
SIST EN 61000-4-13:2003/A2:2016
EN 61000-4-13:2002/A2:2016
European foreword
The text of document 77A/904/FDIS, future IEC 61000-4-13:2002/A2, prepared by SC 77A, "EMC -Low-
frequency phenomena", of IEC TC 77, "Electromagnetic compatibility" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61000-4-13:2002/A2:2016.
The following dates are fixed:
• latest date by which the document has (dop) 2016-10-18
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2019-01-18
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61000-4-13:2002/A2:2015 was approved by CENELEC as a
European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 61000-4-13:2003/A2:2016
IEC 61000-4-13
®
E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.