iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60454-3-10:1998

(Main)

Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive

Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive

Contains requirements for pressure-sensitive adhesive tapes made ofcellulose-acetate-butyrate film with rubber thermosetting adhesive.

Selbstklebende Bänder für elektrotechnische Anwendungen -- Teil 3: Bestimmungen für einzelne Materialien -- Blatt 10: Anforderungen für Zelluloseacetat-butyrat-Bänder mit wärmehärtendem Kautschuk-Klebstoff

Rubans adhésifs sensibles à la pression à usages électriques -- Partie 3: Spécifications pour matériaux particuliers -- Feuille 10: Prescriptions relatives aux rubans d'acétate-butyrate de cellulose avec un adhésif en caoutchouc thermodurcissable

Contient les prescriptions relatives aux rubans adhésifs sensibles à la pression, constitués de rubans d'acétate-butyrate de cellulose avec un adhésif en caoutchouc thermodurcissable.

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive (IEC 60454-3-10:1995)

General Information

Status
Withdrawn
Publication Date
31-May-1998
Withdrawal Date
12-Sep-2011
ICS
29.035.01 - Insulating materials in general
Technical Committee
IIZS - Insulating materials and systems
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
08-Sep-2011
Due Date
01-Oct-2011
Completion Date
13-Sep-2011
Ref Project
EN 60454-3-10:1995 - Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive

Buy Standard

EN 60454-3-10:1998EN 60454-3-10:1998
PreviousNext
Standard
EN 60454-3-10:1998
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60454-3-10:1998
01-junij-1998
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications
for individual materials - Sheet 10: Requirements for cellulose-acetate-butyrate
film tapes with rubber thermosetting adhesive (IEC 60454-3-10:1995)
Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for
individual materials -- Sheet 10: Requirements for cellulose-acetate-butyrate film tapes
with rubber thermosetting adhesive
Selbstklebende Bänder für elektrotechnische Anwendungen -- Teil 3: Bestimmungen für
einzelne Materialien -- Blatt 10: Anforderungen für Zelluloseacetat-butyrat-Bänder mit
wärmehärtendem Kautschuk-Klebstoff
Rubans adhésifs sensibles à la pression à usages électriques -- Partie 3: Spécifications
pour matériaux particuliers -- Feuille 10: Prescriptions relatives aux rubans d'acétate-
butyrate de cellulose avec un adhésif en caoutchouc thermodurcissable
Ta slovenski standard je istoveten z: EN 60454-3-10:1995
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
SIST EN 6
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62631-3-1:2023(Main)
Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method (IEC 62631-3-1:2023)
EN IEC 62631-3-1:2023

This part of IEC 62631 covers a method of test for the determination of volume resistance and volume resistivity of electrical insulating materials by applying a DC voltage.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60216-6:2023(Main)
Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTI) of an insulating material using the fixed time frame method (IEC 60216-6:2022)
EN IEC 60216-6:2023

This part of IEC 60216 specifies the experimental and calculation procedures for deriving the thermal endurance characteristics, temperature index (TI) and relative temperature index (RTI) of an electrical insulating material (EIM) using the "fixed time frame method (FTFM)".
In this protocol, the ageing takes place for a small number of fixed times, using the appropriate number of ageing temperatures throughout each time, the properties of the specimens being measured at the end of the relevant time interval. This differs from the procedure of IEC 60216-1, where ageing is conducted at a small number of fixed temperatures, property measurement taking place after ageing times dependent on the progress of ageing.
The diagnostic tests employed in the fixed time frame method are restricted to destructive tests. The method has not yet been applied to non-destructive or proof test procedures.
Both the TI and the RTI determined according to the FTFM protocol are derived from experimental data obtained in accordance with the instructions of IEC 60216-1 and IEC 60216-2 as modified in this part of IEC 60216. The calculation procedures and statistical tests are modified from those of IEC 60216-3 and IEC 60216-5.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60216-5:2023(Main)
Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative temperature index (RTI) of an insulating material (IEC 60216-5:2022)
EN IEC 60216-5:2022

This part of IEC 60216 specifies the experimental and calculation procedures to be used for
deriving the relative temperature index of a material from experimental data obtained in
accordance with the instructions of IEC 60216-1 and IEC 60216-2. The calculation procedures
are supplementary to those of IEC 60216-3.
Guidance is also given for assessment of thermal ageing after a single fixed time and
temperature, without extrapolation.
The experimental data can in principle be obtained using destructive, non-destructive or proof
tests, although destructive tests have been much more extensively employed. Data obtained
from non-destructive or proof tests can be “censored”, in that measurement of times taken to
reach the endpoint have been terminated at some point after the median time but before all
specimens have reached end-point (see IEC 60216-1).
Guidance is given for preliminary assignment of a thermal class for an electrical insulating
material (EIM), based upon the thermal ageing performance.
While the thermal classification of an EIM is not directly related to the thermal classification of
an electrical insulation system (EIS), the thermal classification of an EIS follows the same
concepts as presented in this part of the 60216 series. The calculation procedures of this
standard apply to the determination of the thermal class of an EIS when the thermal stress is
the prevailing ageing factor.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60544-5:2022(Main)
Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service (IEC 60544-5:2022)
EN IEC 60544-5:2022

This part of IEC 60544 covers ageing assessment methods which can be applied to components based on polymeric materials (e.g. cable insulation and jackets, elastomeric seals, polymeric coatings, gaiters) which are used in environments where they are exposed to radiation.
The object of this standard is aimed at providing methods for the assessment of ageing in service. The approaches discussed in the following clauses cover ageing assessment programs based on condition monitoring (CM), the use of sample deposits in severe environments and sampling of real-time aged components.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62631-2-2:2022(Main)
Dielectric and resistive properties of solid insulating materials - Part 2-2: Relative permittivity and dissipation factor - High frequencies (1 MHz to 300 MHz) - AC methods (IEC 62631-2-2:2022)
EN IEC 62631-2-2:2022

This part of IEC 62631 describes test methods for determination of permittivity and dissipation factor properties of solid insulating materials in a high frequencies range from 1 MHz to 300 MHz.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60587:2022(Main)
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion (IEC 60587:2022)
EN IEC 60587:2022

This standard describes two test methods for the evaluation of electrical insulating materials for use under severe ambient conditions at power frequencies (45 Hz to 65 Hz) by the evaluation of the resistance to tracking and erosion, using a liquid contaminant and inclined plane specimens. The two methods are:
- Method 1: test at constant voltage,
- Method 2: test at stepwise increased voltage.
Method 1 is the most widely used method as there is less need for continual inspection.
The test conditions are designed to accelerate the production of the effects, but do not reproduce all the conditions encountered in service.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60455-3-8:2021(Main)
Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories (IEC 60455-3-8:2021)
EN IEC 60455-3-8:2021

This part of IEC 60455 gives the requirements for resins for power cable accessories that
conform to this specification and meet established levels of performance. However, the
selection of a material by a user for a specific application will be based on the actual
requirements necessary for adequate performance in that application and not on this
specification alone.
These materials are designed to be used in low and medium voltage cable accessories and as
such, electrical performance is proven as part of the assembly. Examples of this are described
in EN 50393 and IEC 60502-4.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60216-3:2021(Main)
Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics (IEC 60216-3:2021)
EN IEC 60216-3:2021

This part of IEC 60216 specifies the calculation procedures used for deriving thermal
endurance characteristics from experimental data obtained in accordance with the instructions
of IEC 60216-1 and IEC 60216-2 [1]1, using fixed ageing temperatures and variable ageing
times.
The experimental data can be obtained using non-destructive, destructive or proof tests. Data
obtained from non-destructive or proof tests can be incomplete, in that it is possible that
measurement of times taken to reach the end-point will have been terminated at some point
after the median time but before all specimens have reached end-point.
The procedures are illustrated by worked examples, and suitable computer programs are
recommended to facilitate the calculations.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60112:2021(Main)
Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2020)
EN IEC 60112:2020

This document specifies the method of test for the determination of the proof and comparative
tracking indices of solid insulating materials on pieces taken from parts of equipment and on
plaques of material using alternating voltage.
This document provides a procedure for the determination of erosion when required.
NOTE 1 The proof tracking index is used as an acceptance criterion as well as a means for the quality control of
materials and fabricated parts. The comparative tracking index is mainly used for the basic characterization and
comparison of the properties of materials.
This test method evaluates the composition of the material as well as the surface of the
material being evaluated. Both the composition and surface condition directly influence the
results of the evaluation and are considered when using the results in material selection
process.
Test results are not directly suitable for the evaluation of safe creepage distances when
designing electrical apparatus.
NOTE 2 This is in compliance with IEC 60664-1, Insulation coordination for equipment within low-voltage
systems – Part 1: Principles, requirements and tests.
NOTE 3 This test discriminates between materials with relatively poor resistance to tracking, and those with
moderate or good resistance, for use in equipment which can be used under moist conditions. More severe tests of
longer duration are available for the assessment of performance of materials for outdoor use, utilizing higher
voltages and larger test specimens (see the inclined plane test of IEC 60587). Other test methods such as the
inclined method can rank materials in a different order from the drop test given in this document.
This basic safety publication focusing on a safety test method is primarily intended for use by
technical committees in the preparation of safety publications in accordance with the
principles laid down in IEC Guide 104 and lSO/lEC Guide 51.
One of the responsibilities of a technical committee is, wherever applicable, to make use of
basic safety publications in the preparation of its publications.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62677-3-103:2019(Main)
Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications (IEC 62677-3-103:2019)
EN IEC 62677-3-103:2019

This part of IEC 62677 is applicable to heat shrinkable low and medium voltage moulded shapes, conductive, in a range of configurations suitable for environmental sealing, mechanical protection, strain relief for power cable terminations, joints and stop ends. These moulded shapes have been found suitable for use for temperatures between −40 ºC and 100 ºC.
The moulded shapes can be supplied with a pre-coated adhesive. A guide to adhesive compatibility and temperature performance is given in Annex A. The manufacturers/suppliers can be consulted for options.
Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will need to be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.
The tests specified are designed to control the quality of the moulded shapes but it is recognized that they are designed to be used in low and medium voltage cable accessories and as such electrical performance will be proven as part of the assembly. Examples of this are described in EN 50393, HD 629 and IEC 60502 (all parts).

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day