SIST EN ISO 15483:2001

Overview

EN ISO 15483:1999 (adopted as SIST EN ISO 15483:2001) is the European adoption of ISO 15483:1999 and specifies requirements for cross recessed raised countersunk head drilling screws with tapping screw thread. The document defines the standardized product family and provides a common technical basis for manufacture, procurement and quality assessment of these self‑drilling/tapping fasteners. It is indexed under ICS 21.060.10 (bolts, screws, studs).

Key topics

The standard covers the essential characteristics and conformity aspects typically required for fastener specification and control:

• Product designation and terminology for cross‑recessed, raised countersunk head drilling screws with tapping thread.
• Geometry and head form definitions to ensure consistent fit with mating drivers and countersunk surfaces.
• Thread and drilling features that distinguish drilling screws (self‑drilling point) and tapping screw threads.
• Dimensional tolerances and acceptable variations for manufacturing control (general treatment rather than specific proprietary sizes).
• Material and surface treatment considerations to achieve corrosion resistance and mechanical performance (normative references rather than prescriptive material lists).
• Quality assurance and testing principles used to verify compliance with the standard (e.g., visual, dimensional and functional checks).
• Marking, packaging and documentation practices to support traceability and correct application.

Applications

EN ISO 15483 applies where a single-component fastener must both drill a pilot hole and form its own thread in sheet or thin-section materials. Typical practical uses include:

• Fastening sheet metal components in building façades, roofing and cladding systems.
• Assembly of metal enclosures, HVAC ducts and light-gauge steel framing.
• General sheet‑metal fabrication and on-site construction work where rapid, reliable fastening is required.

Use of the standard helps ensure compatibility with standard drivers and predictable performance in mechanical and corrosion environments.

Who uses this standard

• Fastener manufacturers and tool designers for consistent product specification and production control.
• Product designers and engineers who select self-drilling/tapping screws for assemblies.
• Procurement and quality assurance teams specifying acceptance criteria and supplier conformity.
• Test laboratories and certification bodies performing inspections and compliance checks.

Related standards

• EN ISO 15483 is intended to be published alongside EN ISO 10666 (see document scope note), and users should consult related ISO/CEN fastener standards for complementary dimensions, testing methods and materials guidance.

Keywords: EN ISO 15483, ISO 15483:1999, cross recessed raised countersunk head drilling screws, tapping screw thread, self‑drilling screws, fasteners standard.