SIST EN 10305-2:2003
(Main)Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
This Part of this European Standard specifies the technical delivery conditions for welded cold drawn steel tubes of circular cross section for precision application.
NOTE This Part of this European Standard may also be applicable to other types of cross section.
Tubes according to this Part of this European Standard are characterized by having precisely defined tolerances on dimensions and a specified surface roughness. Typical fields of application are in the vehicle, furniture and general engineering industries.
Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 2: Geschweißte kaltgezogene Rohre
Dieser Teil der EN 10xyz enthält die technischen Lieferbedingungen für geschweißte kaltgezogene Präzisionsrohre mit kreisförmigem Querschnitt aus Stählen nach Tabelle 2. Rohre nach diesem Teil der EN 10xyz sind durch genau definierte Grenzabmaße und eine festgelegte Oberflächenrauheit charakterisiert.
Tubes de précision en acier - Conditions techniques de livraison - Partie 2: Tubes soudés étirés a froid
La présente partie de l'EN 10305 spécifie les conditions techniques de livraison pour les tubes en acier soudés étirés à froid, de section circulaire, destinés aux applications de précision.
NOTE La présente partie de l'EN 10305 peut aussi s'appliquer à d'autres types de section.
Les tubes conformes à la présente partie de l'EN 10305 se caractérisent par des tolérances dimensionnelles précises et par une rugosité spécifiée. Les domaines typiques d'application sont l'automobile, le mobilier et les industries de construction mécanique.
Jeklene cevi za precizno uporabo - Tehnični dobavni pogoji - 2. del: Varjene hladno vlečene cevi
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 2: Geschweißte kaltgezogene RohreTubes de précision en acier - Conditions techniques de livraison - Partie 2: Tubes soudés étirés a froidSteel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 10305-2:2002SIST EN 10305-2:2003en01-april-2003SIST EN 10305-2:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10305-2November 2002ICS 77.140.75English versionSteel tubes for precision applications - Technical deliveryconditions - Part 2: Welded cold drawn tubesTubes de précision en acier - Conditions techniques delivraison - Partie 2: Tubes soudés étirés à froidPräzisionsstahlrohre - Technische Lieferbedingungen - Teil2: Geschweißte kaltgezogene RohreThis European Standard was approved by CEN on 2 October 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10305-2:2002 ESIST EN 10305-2:2003
List of corresponding former symbols for delivery conditions and nationalsteel designations.20Bibliography.21SIST EN 10305-2:2003
1)In preparation, until this document is published as a European Standard a corresponding national standard should beagreed at the time of enquiry and order.SIST EN 10305-2:2003
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.