SIST EN 1425:2012
(Main)Bitumen and bituminous binders - Characterization of perceptible properties
Bitumen and bituminous binders - Characterization of perceptible properties
This European Standard specifies a method for the determination of the perceptible properties of bituminous binders at ambient temperature prior to testing for other properties.
WARNING - The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Feststellung der äßeren Beschaffenheit
Diese Europäische Norm legt ein Verfahren zur Feststellung der äußeren Beschaffenheit von bitumenhaltigen Bindemitteln bei Raumtemperatur vor der Prüfung anderer Eigenschaften fest. WARNUNG - Die Anwendung dieser Norm kann den Umgang mit gefährlichen Substanzen und Aus-rüstungsteilen und die Ausführung gefährlicher Arbeitsgänge einschließen. Diese Norm erhebt nicht den Anspruch, alle mit ihrer Anwendung verbundenen Sicherheitsprobleme anzusprechen. Es liegt in der Verantwortung des Anwenders dieser Norm, geeignete Verhaltensregeln zur Sicherheit und Ge-sundheit festzulegen und vor der Anwendung zu klären, ob einschränkende Vorschriften zu berück-sichtigen sind.
Bitumes et liants bitumineux - Caractérisation des propriétés sensorielles
La présente norme européenne prescrit une méthode pour la détermination des propriétés sensorielles des liants bitumineux à température ambiante, préalablement à la détermination des autres propriétés.
AVERTISSEMENT L'utilisation de la présente norme européenne peut impliquer l'intervention de produits, d'opérations et d'équipements à caractère dangereux. Cette norme n'est pas censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de cette norme de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Ugotavljanje vidnih lastnosti
Ta evropski standard določa metodo za ugotavljanje vidnih lastnosti bitumenskih veziv pri temperaturi okolja pred preskušanjem v zvezi z drugimi lastnostmi.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen in bitumenska veziva - Ugotavljanje vidnih lastnostiBitumen und bitumenhaltige Bindemittel - Feststellung der äßeren BeschaffenheitBitumes et liants bitumineux - Caractérisation des propriétés sensoriellesBitumen and bituminous binders - Characterization of perceptible properties91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 1425:2012SIST EN 1425:2012en,fr,de01-september-2012SIST EN 1425:2012SLOVENSKI
STANDARDSIST EN 1425:2000/A1:2006SIST EN 1425:20001DGRPHãþD
SIST EN 1425:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1425
May 2012 ICS 75.140; 91.100.50 Supersedes EN 1425:1999English Version
Bitumen and bituminous binders - Characterization of perceptible properties
Bitumes et liants bitumineux - Caractérisation des propriétés sensorielles
Bitumen und bitumenhaltige Bindemittel - Feststellung der äußeren Beschaffenheit This European Standard was approved by CEN on 30 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1425:2012: ESIST EN 1425:2012
EN 1425:2012 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .53 Terms and definitions .54 Apparatus .55 Sampling .56 Procedure .57 Test report .6 SIST EN 1425:2012
EN 1425:2012 (E) 3 Foreword This document (EN 1425:2012) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR/BNPé. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2012, and conflicting national standards shall be withdrawn at the latest by November 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1425:1999.1 Compared with EN 1425:1999 the following changes have been made: a) Contents added; b) container removed from Apparatus; c) Clause 6 re-structured and Note added in 6.1; d) requirements c) and d) added in Clause 7. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ire
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen in bitumenska veziva - Ugotavljanje vidnih lastnostiBitumen und bitumenhaltige Bindemittel - Feststellung der äßeren BeschaffenheitBitumes et liants bitumineux - Caractérisation des propriétés sensoriellesBitumen and bituminous binders - Characterization of perceptible properties91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:FprEN 1425kSIST FprEN 1425:2011en,fr,de01-december-2011kSIST FprEN 1425:2011SLOVENSKI
STANDARD
kSIST FprEN 1425:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 1425
September 2011 ICS 75.140; 91.100.50 Will supersede EN 1425:1999English Version
Bitumen and bituminous binders - Characterization of perceptible properties
Bitumes et liants bitumineux - Caractérisation des propriétés sensorielles
Bitumen und bitumenhaltige Bindemittel - Feststellung der äußeren Beschaffenheit This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 336.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 1425:2011: EkSIST FprEN 1425:2011
FprEN 1425:2011 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .53 Terms and definitions .54 Apparatus .55 Sampling .56 Procedure .57 Test report .6 kSIST FprEN 1425:2011
FprEN 1425:2011 (E) 3 Foreword This document (FprEN 1425:2011) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 1425:1999. kSIST FprEN 1425:2011
FprEN 1425:2011 (E) 4 Introduction The properties of bituminous binders
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.