SIST EN ISO 4608:2024
(Main)Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:2023)
Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:2023)
This document specifies a method for determining the plasticizer absorption at room temperature. It is applicable to PVC general-purpose resins and filler resins designated "G" and "F" in ISO 24024-1.
This document can be used to determine the quantity of plasticizer absorbed by a resin at room temperature to give a dry mixture.
Kunststoffe - Vinylchlorid (VC)-Homopolymere und Copolymere für allgemeine Anwendungen - Bestimmung der Weichmacheraufnahme bei Raumtemperatur (ISO 4608:2023)
Dieses Dokument legt ein Verfahren für die Bestimmung der Weichmacheraufnahme bei Raumtemperatur fest. Es ist anwendbar auf PVC für allgemeine Anwendungen und Extender Harze, bezeichnet mit „G“ und „F“ in ISO 24024 1 [1].
Dieses Dokument kann zur Bestimmung der Weichmachermenge, die ein Polymerisat bei Raumtemperatur unter Bildung einer trockenen Mischung aufnimmt, angewendet werden.
Plastiques - Résines d'homopolymères et de copolymères de chlorure de vinyle à usages généraux - Détermination de la prise de plastifiant à température ambiante (ISO 4608:2023)
Le présent document spécifie une méthode pour la détermination de la prise de plastifiant à la température ambiante. Il est applicable aux résines PVC à usages généraux et aux résines chargées désignées «G» et «F» dans l’ISO 24024-1.
Le présent document peut être utilisé pour déterminer la quantité de plastifiant qu’une résine absorbe à température ambiante pour donner un mélange sec.
Polimerni materiali - Homo- in kopolimeri vinilklorida za splošno uporabo - Določanje absorpcije mehčal pri sobni temperaturi (ISO 4608:2023)
Ta dokument določa metodo za ugotavljanje absorpcije mehčal pri sobni temperaturi. Uporablja se za smole iz polivinilklorida za splošno uporabo in polnilne smole z oznako »G« in »F« iz standarda ISO 24024-1.
Ta dokument je mogoče uporabiti za določanje količine mehčala, ki ga absorbira smola pri sobni temperaturi, da nastane suha mešanica.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4608:2024
01-februar-2024
Polimerni materiali - Homo- in kopolimeri vinilklorida za splošno uporabo -
Določanje absorpcije mehčal pri sobni temperaturi (ISO 4608:2023)
Plastics - Homopolymer and copolymer resins of vinyl chloride for general use -
Determination of plasticizer absorption at room temperature (ISO 4608:2023)
Kunststoffe - Vinylchlorid (VC)-Homopolymere und Copolymere für allgemeine
Anwendungen - Bestimmung der Weichmacheraufnahme bei Raumtemperatur (ISO
4608:2023)
Plastiques - Résines d'homopolymères et de copolymères de chlorure de vinyle à
usages généraux - Détermination de la prise de plastifiant à température ambiante (ISO
4608:2023)
Ta slovenski standard je istoveten z: EN ISO 4608:2023
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 4608:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4608:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 4608:2024
EN ISO 4608
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2023
EUROPÄISCHE NORM
ICS 83.080.20 Supersedes EN ISO 4608:1998
English Version
Plastics - Homopolymer and copolymer resins of vinyl
chloride for general use - Determination of plasticizer
absorption at room temperature (ISO 4608:2023)
Plastiques - Résines d'homopolymères et de Kunststoffe - Vinylchlorid (VC)-Homopolymere und
copolymères de chlorure de vinyle à usages généraux - Copolymere für allgemeine Anwendungen -
Détermination de la prise de plastifiant à température Bestimmung der Weichmacheraufnahme bei
ambiante (ISO 4608:2023) Raumtemperatur (ISO 4608:2023)
This European Standard was approved by CEN on 20 November 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4608:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4608:2024
EN ISO 4608:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4608:2024
EN ISO 4608:2023 (E)
European foreword
This document (EN ISO 4608:2023) has been prepared by Technical Committee ISO/TC 61 "Plastics" in
collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2024, and conflicting national standards shall be
withdrawn at the latest by May 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4608:1998.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spai
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.