iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 15974:2002

(Main)

Closed end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15974:2000)

Closed end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15974:2000)

Migrated from Progress Sheet (TC Comment) (2000-07-10): WIs 189-200 are the result of the splitting of WI 165 (TC res 104/1997)

Geschlossene Blindniete mit Sollbruchdorn und Senkkopf -AlA/ St (ISO 15974:2000)

Diese Internationale Norm legt Maße und mechanische Eigenschaften sowie Anwendungsdaten für geschlossene Blindniete mit Sollbruchdorn und Senkkopf, mit einer Niethülse aus Aluminiumlegierung und einem Nietdorn aus Stahl und mit Nenndurchmessern von 3,2 mm bis 4,8 mm fest.

Rivets aveugles a rupture de tige a corps fermé, a tete fraisée -AlA/ St (ISO 15974:2000)

La présente Norme internationale spécifie les caractéristiques dimensionnelles et mécaniques ainsi que les données d'application pour les rivets aveugles à rupture de tige à corps fermé, à tête fraisée, avec un corps en alliage d'aluminium (AIA) et une tige en acier (St), de diamètres nominaux compris entre 3,2 mm et 4,8 mm inclus.

Slepe polne kovice z zarezanim zakovnim trnom in ugrezno glavo (ISO 15974:2000)

General Information

Status
Published
Publication Date
30-Jun-2002
ICS
21.060.40 - Rivets
Technical Committee
ISEL - Mechanical elements
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jul-2002
Due Date
01-Jul-2002
Completion Date
01-Jul-2002
Ref Project
EN ISO 15974:2000 - Closed end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15974:2000)

Buy Standard

EN ISO 15974:2002EN ISO 15974:2002
PreviousNext
Standard
EN ISO 15974:2002
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Slepe polne kovice z zarezanim zakovnim trnom in ugrezno glavo (ISO 15974:2000)Geschlossene Blindniete mit Sollbruchdorn und Senkkopf -AlA/ St (ISO 15974:2000)Rivets aveugles a rupture de tige a corps fermé, a tete fraisée -AlA/ St (ISO 15974:2000)Closed end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15974:2000)21.060.40KoviceRivetsI
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 15978:2003(Main)
Open end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15978:2002)
EN ISO 15978:2002

ISO 15978 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy body and a steel mandrel with nominal diameters from 2,4 mm up to and including 5 mm.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15975:2003(Main)
Closed end blind rivets with break pull mandrel and protrudiing head - AI/AIA (ISO 15975:2002)
EN ISO 15975:2002

ISO 15975 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a commercially pure aluminium body (Al) and an aluminium alloy mandrel (AlA) and with nominal diameters from 3,2 mm up to and including 4,8 mm.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15981:2003(Main)
Open end blind rivets with break pull mandrel and protruding head - AIA/AIA (ISO 15981:2002)
EN ISO 15981:2002

ISO 15981 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AlA) and an aluminium alloy mandrel (AlA) and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15980:2003(Main)
Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002)
EN ISO 15980:2002

ISO 15980 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a steel body and a steel mandrel and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15983:2003(Main)
Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002)
EN ISO 15983:2002

ISO 15983 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal diameters from 3 mm up to and including 5 mm.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16582:2003(Main)
Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)
EN ISO 16582:2002

ISO 16582 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters from 3 mm up to and including 4,8 mm.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16583:2003(Main)
Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002)
EN ISO 16583:2002

ISO 16583 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters from 3 mm up to and including 4,8 mm.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15977:2003(Main)
Open end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15977:2002)
EN ISO 15977:2002

ISO 15977 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body and a steel mandrel and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16585:2003(Main)
Closed end blind rivets with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)
EN ISO 16585:2002

ISO 16585 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an austenitic stainless-steel body (A2) and a stainless-steel mandrel (SSt) and with nominal diameters from 3,2 mm up to and including 6,4 mm.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15979:2003(Main)
Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002)
EN ISO 15979:2002

ISO 15979 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a steel body and a steel mandrel and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day