SIST EN ISO 10893-10:2011/A1:2020

SLOVENSKI STANDARD
SIST EN ISO 10893-10:2011/A1:2020
01-november-2020
Neporušitveno preskušanje jeklenih cevi - 10. del: Avtomatizirano ultrazvočno
preskušanje in odkrivanje vzdolžnih in/ali prečnih nepravilnosti po celotnem
obodu nevarjenih in varjenih jeklenih cevi (razen obločno varjenih pod praškom) -
Dopolnilo A1: Sprememba preskusne ultrazvočne frekvence - sprememba meril
sprejemljivosti (ISO 10893-10:2011/Amd 1:2020)
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic
testing of seamless and welded (except submerged arc-welded) steel tubes for the
detection of longitudinal and/or transverse imperfections - Amendment 1: Change of
ultrasonic test frequency - change of acceptance criteria (ISO 10893-10:2011/Amd
1:2020)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 10: Automatisierte Ultraschallprüfung
nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) Stahlrohre über
den gesamten Rohrumfang zum Nachweis von Unvollkommenheiten in Längs- und/oder
Querrichtung - Änderung 1: Änderung der Ultraschall Prüffrequenz der Prüfköpfe;
Änderung der Zulässigkeitskriterien (ISO 10893-10:2011/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 10893-10:2011/A1:2020
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
SIST EN ISO 10893-10:2011/A1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10893-10:2011/A1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 10893-10:2011/A1:2020


EN ISO 10893-
EUROPEAN STANDARD
10:2011/A1
NORME EUROPÉENNE

EUROPÄISCHE NORM

July 2020
ICS 77.140.75; 77.040.20; 23.040.10
English Version
Non-destructive testing of steel tubes - Part 10: Automated full
peripheral ultrasonic testing of seamless and welded (except
submerged arc-welded) steel tubes for the detection of
longitudinal and/or transverse imperfections - Amendment 1:
Change of ultrasonic test frequency; change of acceptance criteria
(ISO 10893-10:2011/Amd 1:2020)
Essais non destructifs des tubes en acier - Partie 10: Zerstörungsfreie Prüfung von Stahlrohren - Teil 10:
Contrôle automatisé par ultrasons sur toute la Automatisierte Ultraschallprüfung nahtloser und
circonférence des tubes en acier sans soudure et geschweißter (ausgenommen
soudés (sauf à l'arc immergé sous flux en poudre) pour unterpulvergeschweißter) Stahlrohre über den
la détection des imperfections longitudinales et/ou gesamten Rohrumfang zum Nachweis von
transversales - Amendement 1: Changement de la Unvollkommenheiten in Längs- und/oder
fréquence ultrasonore de l'essai; changement des Querrichtung - Änderung 1 (ISO 10893-10:2011/Amd
critères d'acceptation (ISO 10893-10:2011/Amd 1:2020)
1:2020)
This amendment A1 modifies the European Standard EN ISO 10893-10:2011; it was approved by CEN on 11 May 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10893-10:2011/A1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 10893-10:2011/A1:2020
EN ISO 10893-10:2011/A1:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 10893-10:2011/A1:2020
EN ISO 10893-10:2011/A1:2020 (E)
European foreword
This document (EN ISO 10893-10:2011/A1:2020) has been prepared by Technical Committee ISO/TC
17 "Steel" in collaboration with Technical Committee CEN/TC 459/SC 10 “Steel tubes, and iron and
steel fittings” the secretariat of which is held by UNI.
This Amendment to the European Standard EN ISO 10893-10:2011 shall be given the status of a
national standard, either by publication of an identical text or by endorsement, at the latest by January
2021, and conflicting national standards shall be withdrawn at the latest by January 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Sloven
...