SIST EN 13589:2004
(Main)Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method
Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method
This European Standard specifies a method for determining the tensil properties of a bituminous binder, in particular those of polymer-modified bitumens by means of a force ductility test. NOTE: The tensile properties, more particularly the tensile strength and elongation, at the yield point and on fracture, are customarily used as a criterion for assessing the quality of these materials.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Streckeigenschaften von modifizierten Bitumen mit dem Kraft-Duktilitäts-Verfahren
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Streckeigenschaften von bitumenhaltigen Bindemitteln, insbesondere solchen von polymermodifiziertem Bitumen, mit einer Kraft-Duktilitäts-Prüfung fest. ANMERKUNG: Die Streckeigenschaften, insbesondere Zugfestigkeit und Dehnung an der Streckgrenze und beim Bruch, werden üblicherweise als ein Kriterium für die Qualität dieses Materials verwendet.
Bitumes et liants bitumineux - Détermination des caractéristiques de traction des bitumes modifiés par la méthode de force ductilité
La présente Norme européenne prescrit une méthode permettant de déterminer les caractéristiques de traction des liants bitumineux, en particulier celles des bitumes modifiés par des polymeres, au moyen d'un essai de force-ductilité.
Le travail effectué pendant l'essai de force-ductilité est un critere de jugement de la qualité de ces matériaux.
AVERTISSEMENT - L'utilisation de la présente Norme européenne implique l'intervention de produits, d'opérations et d'équipements a caractere dangereux. La présente Norme européenne n'est pas censée aborder tous les problemes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des regles de sécurité et d'hygiene appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določevanje nateznih lastnosti modificiranih bitumnov - Metoda določanja sile pri merjenju duktilnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13589:2004
01-september-2004
%LWXPHQLQELWXPHQVNDYH]LYD'RORþHYDQMHQDWH]QLKODVWQRVWLPRGLILFLUDQLK
ELWXPQRY0HWRGDGRORþDQMDVLOHSULPHUMHQMXGXNWLOQRVWL
Bitumen and bituminous binders - Determination of the tensile properties of modified
bitumen by the force ductility method
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Streckeigenschaften von
modifizierten Bitumen mit dem Kraft-Duktilitäts-Verfahren
Bitumes et liants bitumineux - Détermination des caractéristiques de traction des bitumes
modifiés par la méthode de force ductilité
Ta slovenski standard je istoveten z: EN 13589:2003
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 13589:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13589:2004
---------------------- Page: 2 ----------------------
SIST EN 13589:2004
EUROPEAN STANDARD
EN 13589
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2003
ICS 91.100.50
English version
Bitumen and bituminous binders - Determination of the tensile
properties of modified bitumen by the force ductility method
Bitumes et liants bitumineux - Détermination des Bitumen und bitumenhaltige Bindemittel - Bestimmung der
caractéristiques de traction des bitumes modifiés par la Streckeigenschaften von modifizierten Bitumen mit dem
méthode de force ductilité Kraft-Duktilitäts-Verfahren
This European Standard was approved by CEN on 21 November 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13589:2003 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13589:2004
EN 13589:2003 (E)
Contents page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Principle.5
5 Apparatus .5
5.1 Ductilometer .5
5.1.1 Traction device.5
5.1.2 Water bath.5
5.2 Recording device .5
5.3 Specimen moulding equipment.5
6 Preparation and conservation of samples for testing .6
7 Procedure .6
8 Expression of results .7
9 Precision.7
10 Test report .7
2
---------------------- Page: 4 ----------------------
SIST EN 13589:2004
EN 13589:2003 (E)
Foreword
This document EN 13589:2003 has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by June 2004, and conflicting national standards shall be withdrawn at the latest by
June 2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard : Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,
Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 13589:2004
EN 13589:2003 (E)
1 Scope
This European Standard specifies a method for determining the tensile properties of a bituminous binder, in
particular those of polymer-modified bitumens by means of a force ductility test.
The work done during the force ductility test is a criterion for assessing the quality of these materials.
WARNING — The use of this European Standard may involve hazardous materials, operati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.