Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method

This European Standard specifies a method for determining the tensile properties of a bituminous binder, in particular those of polymer-modified bitumens by means of a force ductility test.
The work done during the force ductility test is a criterion for assessing the quality of these materials.
WARNING — The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Bitumen und bitumenhaltige Bindemittel - Bestimmung der Streckeigenschaften von modifiziertem Bitumen mit dem Kraft-Duktilitäts-Verfahren

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Streckeigenschaften von bitumenhaltigen
Bindemitteln, insbesondere solchen von polymermodifiziertem Bitumen, mit einer Kraft-Duktilitäts-Prüfung fest.
Die bei der Kraft-Duktilitäts-Prüfung geleistete Arbeit ist ein Kriterium zur Bestimmung der Qualität dieser
Materialien.
WARNUNG - Die Anwendung dieser Europäischen Norm kann gefährliche Substanzen, Arbeitsgänge
und Ausrüstung einschließen. In dieser Europäischen Norm werden nicht alle Sicherheitsprobleme
angesprochen, die mit der Anwendung verbunden sind. Es liegt in der Verantwortung des Anwenders
der vorliegenden Europäischen Norm, geeignete Sicherheits- und Gesundheitsmaßnahmen vorzusehen
und vorher zu klären, ob einschränkende Vorschriften zu berücksichtigen sind.

Bitumes et liants bitumineux - Détermination des caractéristiques de traction des bitumes modifiés par la méthode de force-ductilité

La présente Norme européenne prescrit une méthode permettant de déterminer les caractéristiques de
traction des liants bitumineux, en particulier celles des bitumes modifiés par des polymères, au moyen d'un
essai de force-ductilité.
Le travail effectué pendant l‘essai de force-ductilité est un critère permettant d’évaluer la qualité de ces
matériaux.
AVERTISSEMENT - L'utilisation de la présente Norme européenne implique l'intervention de
produits, d'opérations et d'équipements à caractère dangereux. La présente Norme européenne n'est
pas censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la
responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées
et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.

Bitumen in bitumenska veziva - Določevanje nateznih lastnosti modificiranih bitumnov - Metoda določanja sile pri merjenju duktilnosti

General Information

Status
Withdrawn
Publication Date
06-Aug-2008
Withdrawal Date
29-Aug-2018
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
24-Aug-2018
Due Date
16-Sep-2018
Completion Date
30-Aug-2018

Relations

Buy Standard

Standard
EN 13589:2008
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LILFLUDQLKBitumen und bitumenhaltige Bindemittel - Bestimmung der Streckeigenschaften von modifiziertem Bitumen mit dem Kraft-Duktilitäts-VerfahrenBitumes et liants bitumineux - Détermination des caractéristiques de traction des bitumes modifiés par la méthode de force-ductilitéBitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13589:2008SIST EN 13589:2008en,fr,de01-september-2008SIST EN 13589:2008SLOVENSKI
STANDARDSIST EN 13589:20041DGRPHãþD



SIST EN 13589:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13589March 2008ICS 91.100.50Supersedes EN 13589:2003
English VersionBitumen and bituminous binders - Determination of the tensileproperties of modified bitumen by the force ductility methodBitumes et liants bitumineux - Détermination descaractéristiques de traction des bitumes modifiés par laméthode de force-ductilitéBitumen und bitumenhaltige Bindemittel - Bestimmung derStreckeigenschaften von modifiziertem Bitumen mit demKraft-Duktilitäts-VerfahrenThis European Standard was approved by CEN on 21 January 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13589:2008: ESIST EN 13589:2008



EN 13589:2008 (E) 2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.5 5 Apparatus.5 6 Preparation and conservation of samples for testing.6 7 Procedure.7 8 Expression of results.7 9 Precision.7 10 Test report.7 Bibliography.9
SIST EN 13589:2008



EN 13589:2008 (E) 3 Foreword This document (EN 13589:2008) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2008, and conflicting national standards shall be withdrawn at the latest by September 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13589:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 13589:2008



EN 13589:2008 (E) 4
1 Scope This European Standard specifies a method for determining the tensile properties of a bituminous binder, in particular those of polymer-modified bitumens by means of a force ductility test. The work done during the force ductility test is a criterion for assessing the quality of these materials. WARNING — The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 58, Bitumen and bituminous binders – Sampling bituminous binders EN 1431, Bitumen and bituminous binders – Determination of recovered binder and oil distillate from bitumen emulsions by distillation EN 12594, Bitumen and bituminous binders – Preparation of test samples EN 13074, Bitumen and bituminous binders – Recovery of binder from bitumen emulsions by evaporation EN 13398, Bitumen and bituminous binders – De
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.