oSIST prEN 3545-003:2025

SLOVENSKI STANDARD
01-januar-2025
Aeronavtika - Konektorji, električni, pravokotni, s tesnilno kapo ali brez nje,
plastičnim ohišjem, zapornim mehanizmom, z delovno temperaturo med –55 °C in
175 °C - 003. del: Konektorji z ženskim kontaktom - Standard za proizvod
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear,
plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 003:
Connectors with female contacts - Product standard
Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere
Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von -55 °C bis
175 °C - Teil 003: Steckverbinder mit Buchsenkontakten - Produktnorm
Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches
à l’arrière, à boîtier en plastique, à verrouillage, températures d’utilisation -55 °C à 175
°C - Partie 003 : Connecteurs à contacts femelles - Norme de produit
Ta slovenski standard je istoveten z: prEN 3545-003
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2024
ICS 49.060 Will supersede EN 3545-003:2005
English Version
Aerospace series - Connectors, electrical, rectangular, with
sealed and non-sealed rear, plastic housing, locking device,
operating temperatures -55 °C to 175 °C - Part 003:
Connectors with female contacts - Product standard
Série aérospatiale - Connecteurs électriques, Luft- und Raumfahrt - Elektrische
rectangulaires, étanches et non étanches à l'arrière, à Rechtecksteckverbinder mit und ohne hintere
boîtier en plastique, à verrouillage, températures Abdichtung, Plastikgehäuse, Verriegelungssystem,
d'utilisation -55 °C à 175 °C - Partie 003 : Connecteurs Betriebstemperaturen von -55 °C bis 175 °C - Teil 003:
à contacts femelles - Norme de produit Steckverbinder mit Buchsenkontakten - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3545-003:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Dimensions, mass . 4
4.2 Recommended panel cut-out for connectors fitted with male coding and attachment
system . 7
4.3 Main general characteristics . 7
5 Designation . 8
6 Delivery conditions . 9
7 Marking . 9
8 Technical specification . 9
Bibliography . 10

European foreword
This document (prEN 3545-003:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 3545-003:2005.
This document includes the following significant technical changes with respect to EN 3545-003:2005:
— Clause 5 Designation: differentiation between cadmium plated and zinc-nickel plated connectors and
introduction of corresponding coding;
— ed
...