SIST EN 15837:2010
(Main)Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Inductively coupled plasma optical emission spectrometric direct method
Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Inductively coupled plasma optical emission spectrometric direct method
This European Standard specifies an inductively coupled plasma optical emission spectrometry (ICP OES) method for the direct determination of elements content in ethanol, namely phosphorus in the range (0,13 to 1,90) mg/kg, copper in the range (0,050 to 0,300) mg/kg, and sulfur in the range (2,0 to 15,0) mg/kg.
Ethanol zum Blendung in Benzin - Bestimmung des Gehalts von Fosfor, Kupfer und Schwefel - Induktiv gekoppeltes Plasma Optisch-Emissionspektrometrisches direktes Prüfverfahren
Diese Europäische Norm legt ein Verfahren zur direkten Bestimmung von Elementen in Ethanol, und zwar
Phosphor im Bereich (0,13 bis 1,90) mg/kg, Kupfer im Bereich (0,050 bis 0,300) mg/kg und Schwefel im
Bereich (2,0 bis 15,0) mg/kg mittels optischer Emissionsspektrometrie mit induktiv gekoppeltem Plasma
(ICP OES) fest.
WARNUNG — Die Anwendung dieses Verfahrens kann den Einsatz gefährlicher Stoffe, Arbeitsgänge
und Geräte mit sich bringen. Diese Norm gibt nicht vor, alle mit ihrer Anwendung verbundenen
Sicherheitsprobleme anzusprechen. Der Anwender dieser Norm ist dafür verantwortlich, vorher
angemessene Maßnahmen hinsichtlich Sicherheit und Gesundheit zu ergreifen und die Anwendbarkeit
einschränkender Vorschriften zu ermitteln.
ANMERKUNG Für die Zwecke dieses Dokuments wird zur Angabe des Massenanteils einer Substanz der Ausdruck
„% (m/m)“ und für den Volumenanteil einer Substanz der Ausdruck „% (V/V)“ verwendet.
Ethanol comme constituant d'essence - Détermination de la teneur de fosfore, coupre et sulphur - Méthode spectrometrique optique directe par inductiv-couple plasme
La présente Norme européenne prescrit une méthode par spectrométrie d’émission atomique par plasma à couplage inductif (ICP-OES) pour la détermination directe de la teneur en éléments dans l’éthanol, les teneurs notamment en phosphore, dans la plage comprise entre (0,13 et 1,90) mg/kg, en cuivre, dans la plage comprise entre (0,050 et 0,300) mg/kg, et en soufre, dans la plage comprise entre (2,0 et 15,0) mg/kg.
AVERTISSEMENT - L'utilisation de la présente Norme européenne peut impliquer l'intervention de produits, d'opérations et d'équipements à caractère dangereux. La présente norme européenne n'est pas censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
NOTE Pour les besoins du présent document, les termes "% (m/m)" et "% (V/V)" représentent la fraction massique (w) et la fraction volumique (.
Etanol kot komponenta za dodajanje motornemu bencinu - Določevanje fosforja, bakra in žvepla - Metoda z direktno spektrometrijo optične emisije z induktivno sklopljeno plazmo
Ta evropski standard opredeljuje metodo z direktno spektrometrijo optične emisije z induktivno sklopljeno plazmo (ICP OES) za neposredno določevanje vsebnosti elementov v etanolu, od tega fosforja v razponu (0,13 do 1,90) mg/kg, bakra v razponu (0,050 do 0,300) mg/kg in žvepla v razponu (2,0 do 15,0) mg/kg.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ethanol zum Blendung in Benzin - Bestimmung des Gehalts von Fosfor, Kupfer und Schwefel - Induktiv gekoppeltes Plasma Optisch-Emissionspektrometrisches direktes PrüfverfahrenEthanol comme constituant d'essence - Détermination de la teneur de fosfore, coupre et sulphur - Méthode spectrometrique optique directe par inductiv-couple plasmeEthanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Inductively coupled plasma optical emission spectrometric direct method75.160.20Liquid fuels71.080.60Alkoholi. EtriAlcohols. EthersICS:Ta slovenski standard je istoveten z:EN 15837:2009SIST EN 15837:2010en,fr,de01-marec-2010SIST EN 15837:2010SLOVENSKI
STANDARD
SIST EN 15837:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15837
December 2009 ICS 75.160.20 English Version
Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
Ethanol comme base de mélange à l'essence - Détermination de la teneur en phosphore, en cuivre et en soufre - Méthode directe par spectrométrie d'émission atomique par plasma à couplage inductif (ICP OES)
Ethanol zur Verwendung als Blendkomponente in Ottokraftstoff - Bestimmung des Gehalts an Phosphor, Kupfer und Schwefel - Direktes Verfahren durch optische Emissionsspektrometrie mit induktiv gekoppeltem Plasma (ICP OES) This European Standard was approved by CEN on 7 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15837:2009: ESIST EN 15837:2010
EN 15837:2009 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Principle .44Reagents .45Apparatus .56Sampling .67Preparation of calibration solutions .68Calibration .68.1Preparation of the instrumentation .68.2Execution of the calibration .68.3Check of calibration .79Sample analysis .710Calculation .811Expression of results .812Precision .812.1General .812.2Repeatability, r .812.3Reproducibility, R .913Test report .9Annex A (normative)
Ethanol density . 10Bibliography . 11 SIST EN 15837:2010
EN 15837:2009 (E) 3 Foreword This document (EN 15837:2009) has been prepared by Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010 and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 15837:2010
EN 15837:2009 (E) 4 1 Scope This European Standard specifies an inductively coupled plasma optical emission spectrometry (ICP OES) method for the direct determination of elements content in ethanol, namely phosphorus in the range (0,13 to 1,90) mg/kg, copper in the range (0,050 to 0,300) mg/kg, and sulfur in the range (2,0 to 15,0) mg/kg. WARNING — The use of this method may involve hazardous equipment, materials and operations. This method does not purport to address to all of the safety problems associated with its use, but it is the responsibility of the user to search and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. NOTE For the purposes of this document, the terms “% (m/m)” and "% (V/V)" are used to represent respectively the mass fraction (w) and volume fraction (ϕ). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 3170, Petroleum liquids — Manual sampling (ISO 3170:2004) EN ISO 3675, Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method (ISO 3675:1998) EN ISO 3696, Water for analytical laboratory use — Specification and test methods (ISO 3696:1987) EN ISO 12185, Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method (ISO 12185:1996) 3 Principle A portion of a sample is directly injected into the spray-chamber of an inductively coupled plasma emission spectrometer. The element content is determined by comparing the emission of the element in the test portion with the emission of the calibration solutions at the same wavelength. The calibration solutions are prepared from suitable compounds dissolved in ethanol. 4 Reagents Use only reagents of recognized analytical grade, unless otherwise specified. 4.1 Phosphorus standard solution, ready-made commercially available phosphorus aqueous standard solution, 1 000 mg/l. 4.2 Copper standard solution, ready-made commercially available copper aqueous standard solution, 1 000 mg/l. 4.3 Sulfur standard solution, which shall be either 4.3.1 or 4.3.2. 4.3.1 Sulfur standard solution, ready-made commercially available sulfur aqueous standard solution, 1 000 mg/l, or
SIST EN 15837:2010
EN 15837:2009 (E) 5 4.3.2 Tetrabutylammonium hydrogen -sulfate (CH3CH2CH2CH2)4N(HSO4), (MW 339,53 g/mol). If tetrabutylammonium hydrogen sulfate is used, weigh 264,5 mg in a 25 ml volumetric flask (5.3). Bring to the mark with ethanol (4.5) and homog
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.