Respiratory protective devices - Powered filtering devices incorporating a loose fitting respiratory interface - Requirements, testing, marking

This document specifies minimum requirements for powered filtering Respiratory Protective Devices (RPD) incorporating a loose fitting respiratory interface (RI). It does not cover devices designed for use in circumstances where there is or might be an oxygen deficiency (concentration in oxygen less than a volume fraction of 17 %).
Escape RPD are not covered by this document.
Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

Atemschutzgeräte - Gebläsefiltergeräte mit einem Atemanschluss ohne Dichtsitz (Haube) - Anforderungen, Prüfung, Kennzeichnung

Dieses Dokument legt Mindestanforderungen für Atemschutzgeräte (ASG) mit Gebläsefiltergerät und Atemanschluss ohne Dichtsitz (RI, en: respiratory interface) fest. Es gilt nicht für Geräte, die für die Verwendung bei möglichem Sauerstoff-Mangel (Sauerstoff-Konzentration weniger als 17 % Volumenanteil) vorgesehen sind.
Fluchtgeräte (Atemschutzgeräte zu Fluchtzwecken) werden von diesem Dokument nicht abgedeckt.
Laborprüfungen und praktische Leistungsprüfungen sind enthalten, um die Übereinstimmung mit den Anforderungen feststellen zu können.

Appareils de protection respiratoire - Appareils filtrants à ventilation assistée avec interface respiratoire à ajustement lâche - Exigences, essais, marquage

Le président document spécifie les caractéristiques minimales exigées des appareils de protection respiratoire (APR) filtrants à assistance motorisée avec interface respiratoire (IR) à ajustement lâche. Il ne s'applique pas aux appareils destinés à être utilisés dans des circonstances présentant ou susceptibles de présenter un défaut d'oxygène (concentration en oxygène inférieure, en fraction volumique, à 17 %).
Les APR pour l’évacuation ne sont pas couverts par le présent document.
Il comporte des essais de laboratoire et des essais pratiques de performance pour évaluer la conformité aux exigences.

Oprema za varovanje dihal - Napajana oprema za filtriranje z vgrajenim ohlapno prilegajočim dihalnim vmesnikom - Zahteve, preskušanje, označevanje

Dokument določa minimalne zahteve za napajano opremo za filtriranje z vgrajenim ohlapno prilegajočim dihalnim vmesnikom. Ne zajema naprav, ki so zasnovane za uporabo v okoliščinah, kjer obstaja ali se lahko pojavi pomanjkanje kisika (koncentracija kisika, manjša od deleža prostornine 17 %).
Ta dokument ne zajema opreme za varovanje dihal za izhod v sili.
Vključeni so tudi laboratorijski in praktični preskusi za ocenjevanje skladnosti z zahtevami.

General Information

Status
Published
Public Enquiry End Date
19-Feb-2017
Publication Date
10-Mar-2024
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
24-Jan-2024
Due Date
30-Mar-2024
Completion Date
11-Mar-2024

Relations

Buy Standard

Standard
EN 12941:2024
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12941:2024
01-april-2024
Nadomešča:
SIST EN 12941:1999
SIST EN 12941:1999/A1:2004
SIST EN 12941:1999/A2:2009
Oprema za varovanje dihal - Napajana oprema za filtriranje z vgrajenim ohlapno
prilegajočim dihalnim vmesnikom - Zahteve, preskušanje, označevanje
Respiratory protective devices - Powered filtering devices incorporating a loose fitting
respiratory interface - Requirements, testing, marking
Atemschutzgeräte - Gebläsefiltergeräte mit einem Atemanschluss ohne Dichtsitz
(Haube) - Anforderungen, Prüfung, Kennzeichnung
Appareils de protection respiratoire - Appareils filtrants à ventilation assistée avec
interface respiratoire à ajustement lâche - Exigences, essais, marquage
Ta slovenski standard je istoveten z: EN 12941:2023
ICS:
13.340.30 Varovalne dihalne naprave Respiratory protective
devices
SIST EN 12941:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12941:2024

---------------------- Page: 2 ----------------------
SIST EN 12941:2024


EN 12941
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2023
EUROPÄISCHE NORM
ICS 13.340.30 Supersedes EN 12941:1998
English Version

Respiratory protective devices - Powered filtering devices
incorporating a loose fitting respiratory interface -
Requirements, testing, marking
Appareils de protection respiratoire - Appareils Atemschutzgeräte - Gebläsefiltergeräte mit einem
filtrants à ventilation assistée avec interface Atemanschluss ohne Dichtsitz (Haube) -
respiratoire à ajustement lâche - Exigences, essais, Anforderungen, Prüfung, Kennzeichnung
marquage
This European Standard was approved by CEN on 9 August 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12941:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 12941:2024
EN 12941:2023 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions, description and symbols . 5
3.1 Terms and definitions . 5
3.2 Description . 6
3.3 Symbols . 7
4 Classification . 7
5 Requirements . 8
5.1 General . 8
5.2 Values and tolerances .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.