iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60079-28:2015/A11:2024

(Amendment)

Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

Creating an amendment on European level to mirror the IEC interpretation sheet of IEC 60079-28:2015/ISH1:2019 which is still active at IEC.

Explosionsgefährdete Bereiche - Teil 28: Schutz von Geräten und Übertragungssystemen, die mit optischer Strahlung arbeiten

Atmosphères explosives - Partie 28: Protection du matériel et des systèmes de transmission utilisant le rayonnement optique

Eksplozivne atmosfere - 28. del: Zaščita opreme, ki uporablja optično sevanje, in sistemov za prenos optičnega sevanja

General Information

Status
Published
Publication Date
13-May-2024
ICS
29.260.20 - Electrical apparatus for explosive atmospheres
Technical Committee
EXP - Electrical apparatus for explosive atmospheres
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
25-Jan-2024
Due Date
31-Mar-2024
Completion Date
14-May-2024
Ref Project
EN 60079-28:2015/A11:2024 - Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

Relations

Amends
SIST EN 60079-28:2015 - Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation (IEC 60079-28:2015)
Effective Date
01-Mar-2022

Buy Standard

EN 60079-28:2015/A11:2024EN 60079-28:2015/A11:2024
PreviousNext
Amendment
EN 60079-28:2015/A11:2024
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60079-28:2015/A11:2024
01-junij-2024
Eksplozivne atmosfere - 28. del: Zaščita opreme, ki uporablja optično sevanje, in
sistemov za prenos optičnega sevanja
Explosive atmospheres - Part 28: Protection of equipment and transmission systems
using optical radiation
Explosionsgefährdete Bereiche - Teil 28: Schutz von Geräten und
Übertragungssystemen, die mit optischer Strahlung arbeiten
Atmosphères explosives - Partie 28: Protection du matériel et des systèmes de
transmission utilisant le rayonnement optique
Ta slovenski standard je istoveten z: EN 60079-28:2015/A11:2024
ICS:
29.260.20 Električni aparati za Electrical apparatus for
eksplozivna ozračja explosive atmospheres
SIST EN 60079-28:2015/A11:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 60079-28:2015/A11:2024

---------------------- Page: 2 ----------------------
SIST EN 60079-28:2015/A11:2024


EUROPEAN STANDARD EN 60079-28:2015/A11

NORME EUROPÉENNE

EUROPÄISCHE NORM January 2024
ICS 29.260.20

English Version
Explosive atmospheres - Part 28: Protection of equipment and
transmission systems using optical radiation
Atmosphères explosives - Partie 28: Protection du matériel Explosionsgefährdete Bereiche - Teil 28: Schutz von
et des systèmes de transmission utilisant le rayonnement Geräten und Übertragungssystemen, die mit optischer
optique Strahlung arbeiten
This amendment A11 is only for the clarification of the European Standard EN 60079-28:2015; it was approved by CENELEC on 2024-01-
16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60079-28:2015/A11:2024 E

---------------------- Page: 3 ----------------------
SIST EN 60079-28:2015/A11:2024
EN 60079-28:2015/A11:2024 (E)
European foreword
This document (EN 60079-28:2015/A11:2024) consists of the text of IEC 60079-28:2015/ISH1:2019, prepared
by IEC/TC 31 "Equipment for explosive atmospheres".
The following dates are fixed:
• latest date by which this document has to be (dop) 2025-01-16
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2027-01-16
conflicting with this document have to be
withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60079-28:2015/ISH1:2019 was approved by CENELEC as a
European Standard without any modification.

2

---------------------- Page: 4 ----------------------
SIST EN 60079-28:2015/A11:2024
IEC 60079-28:2015/ISH1:2019 – 1 –
 IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

IEC 60079-28
Edition 2.0  2015-05


EXPLOSIVE ATMOSPHERES –

Part 28: Protection of equipment and
transmission systems using optical radiation


INTERPRETATION SHEET 1



This interpretation sheet has been prepared by IEC technical committee 31: Equipment for
explosive atmospheres.
The text of this interpretation sheet is based on the following documents:
DISH Report on voting
31/1496/DISH 31/1508/RVDISH

Full information on the voting for the approval of this interpr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60079-31:2024(Main)
Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" (IEC 60079-31:2022 + COR1:2023)
EN IEC 60079-31:2024

IEC 60079-31:2022 is available as IEC 60079-31:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60079-31:2022 is applicable to equipment protected by enclosure and surface temperature limitation for use in explosive dust atmospheres. It specifies requirements for design, construction and testing of Ex Equipment and Ex Components. This document supplements and modifies the general requirements of IEC 60079-0. Where a requirement of this document conflicts with a requirement of IEC 60079-0, the requirement of this document takes precedence. This document does not apply to dusts of explosives, which do not require atmospheric oxygen for combustion, or to pyrophoric substances. This document does not apply to Ex Equipment or Ex Components intended for use in underground parts of mines as well as those parts of surface installations of such mines endangered by firedamp and/or combustible dust. This document does not take account of any risk due to an emission of flammable or toxic gas from the dust. This third edition cancels and replaces the second edition published in 2013. This edition constitutes a technical revision. Main significant changes from the previous edition are:
1) Document has been restructured from edition 2
2) Fault current rating of interrupting contacts in clauses 4.3.1 and 4.4.1, major change type C1
3) Cells and batteries in clauses 4.3.5.1 and 4.4.5.1, major change type C2
4) Overload or malfunction condition for the determination of temperature class for "tb" converter fed rotating electric machines, major change type C3
5) Additional requirements for entry devices with dust ignition protection by enclosure "t", major change type C4
Information about the background of ‘Major Technical Changes’
C1 – Ex Equipment having Level of Protection "ta" shall be rated for connection to a circuit with a prospective short circuit current of not greater than 1.5 kA. For Ex Equipment having Level of Protection "tb" or "tc" which is intended for mains connection and intended to interrupt fault current above 10kA, the equipment shall have a rated maximum short circuit withstand current, be tested according to 6.1.1.1, and be marked according to Clause 7.
C2 – For Ex Equipment having Level of Protection "ta" which contains a cell or battery, only a sealed cell or battery shall be used. For Ex Equipment having Level of Protection "tb" and "tc" where there are sparking contacts or hot surfaces, and which contains a cell or battery, only a sealed cell or battery shall be used.
C3 – Table 2 now includes malfunction conditions for temperature class determination of Level of Protection "tb" converter-fed electric machines.
C4 – Annex A added for entry devices with Type of Protection "t" including cable transit devices.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60079-0:2018/A11:2024(Amendment)
Explosive atmospheres - Part 0: Equipment - General requirements
EN IEC 60079-0:2018/A11:2024

Creating an amendment on European level to mirror the IEC interpretation sheet of IEC 60079-0:2017/ISH1:2019 and IEC 60079-0:2017/ISH2:2019 which are both active at IEC.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-7:2016/A11:2024(Amendment)
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
EN 60079-7:2015/A11:2024

Creating an amendment on European level to mirror the IEC interpretation sheet of IEC 60079-7:2015/ISH1:2016 which is still active at IEC.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-1:2015/A11:2024(Amendment)
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 60079-1:2014/A11:2024

Creating an amendment on European level to mirror the IEC interpretation sheet of IEC 60079-1:2014/ISH1:2020 which is still active at IEC.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60079-17:2024(Main)
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance (IEC 60079-17:2023)
EN IEC 60079-17:2024

This part of the IEC 60079 series applies to users and covers only those factors directly related to the inspection and maintenance of electrical installations specifically designed for hazardous areas, where the hazard may be caused by explosive gas or explosive dust atmospheres.
It does not include:
- other fundamental installation and inspection requirements for electrical installations;
- the verification of electrical equipment;
- protection or ventilation of rooms;
- gas detection systems;
- the repair and overhaul of explosion protected equipment (see IEC 60079-19).
While this standard does not include inspection of safety devices such as used in ventilated rooms (see 60079-13), this standard does include the requirements for inspection and maintenance of individual items of equipment that will be part of such systems, for example motors or sensors.
This standard supplements the requirements for inspection and testing in non-hazardous areas in IEC 60364-6.
NOTE 1 Standards applied at the date of installation might not have been IEC standards.
This standard is intended to be applied where there can be a risk due to the presence of explosive gas or dust mixtures with air or combustible dust layers under normal atmospheric conditions. It does not apply to:
- underground mining areas,
- dusts of explosives,
- pyrophoric substances.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50724:2024(Main)
Fixed Ultrasonic Gas Leak Detectors (UGLD) - General requirements and test methods
EN 50724:2023

This document will refer to UGLD for ultrasonic gas leak detectors.
This standard specifies general requirements for construction, testing and performance, and describes test methods that apply to UGLD.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50104:2020/A1:2023(Amendment)
Electrical equipment for the detection and measurement of oxygen - Performance requirements and test methods
EN 50104:2019/A1:2023

This document specifies general requirements for design, testing and performance, and describes the test methods that apply to portable, transportable and fixed equipment for the measurement of the oxygen concentration in gas mixtures indicating up to 25 % (v/v).

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60079-25:2022/AC:2023(Corrigendum)
Explosive atmospheres - Part 25: Intrinsically safe electrical systems (IEC 60079-25:2020/COR2:2022)
EN IEC 60079-25:2022/AC:2022-12

IEC Corrected version

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62990-1:2023/A11:2023(Amendment)
Workplace Atmospheres - Part 1: Gas detectors - Performance requirements of detectors for toxic gases
EN IEC 62990-1:2022/A11:2022

This part of IEC 62990 specifies general requirements for design, function and performance, and describes the test methods that apply to portable, transportable, and fixed equipment for the detection and concentration measurement of toxic gases and vapours in workplace atmospheres and other industrial and commercial applications. This document is applicable to continuously sensing equipment whose primary purpose is to provide an indication, alarm and/or other output function the purpose of which is to indicate the presence of a toxic gas or vapour in the atmosphere and in some cases to initiate automatic or manual protective action(s). It is applicable to equipment in which the sensor generates an electrical signal when gas is present.
This document applies to two types of equipment:
• Type HM (Health Monitoring) ‘occupational exposure’ equipment: For occupational exposure measurement, the performance requirements are focused on uncertainty of measurement of gas concentrations in the region of Occupational Exposure Limit Values (OELV). The upper limit of measurement will be defined by the manufacturer in accordance with 4.2.1.
• Type SM (Safety Monitoring) ‘general gas detection’ equipment: For general gas detection applications (e.g. safety warning, leak detection), the performance requirements are focused on alarm signalling. The upper limit of measurement will be defined by the manufacturer according to the intended use of the equipment. In general, the requirements for accuracy will be higher for Type HM equipment than for Type SM equipment. The same equipment may meet the requirements of both Type HM and Type SM. For equipment used for sensing the presence of multiple gases this document applies only to the detection of toxic gas or vapour.
This document is not applicable to equipment:
- with samplers and concentrators such as sorbents or paper tape having an irreversible indication;
- used for the measurement of gases and vapours related to the risk of explosion;
- used for the measurement of oxygen; – used only in laboratories for analysis or measurement;
- used only for process measurement purposes;
- used in the domestic environment;
- used in environmental air pollution monitoring;
- used for open-path (line of sight) area gas measurement;
- used for ventilation control in car parks or tunnels.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60079-25:2022(Main)
Explosive atmospheres - Part 25: Intrinsically safe electrical systems (IEC 60079-25:2020 + COR1:2020)
EN IEC 60079-25:2022

This part of IEC 60079 contains the specific requirements for design, construction and
assessment of intrinsically safe systems, Type of Protection “i”, intended for use, as a whole or
in part, in locations in which the use of Group I, II or III Ex Equipment is required.
NOTE 1 This standard is intended for use by the designer of the system e.g. a person who could be a manufacturer,
a specialist consultant or a member of the end-user’s staff.
This document supplements and modifies the general requirements of IEC 60079-0 and the
intrinsic safety standard IEC 60079-11. Where a requirement of this standard conflicts with a
requirement of IEC 60079-0 or IEC 60079-11, the requirement of this standard takes
precedence.
The installation requirements of Group II or Group III systems designed in accordance with this
standard are specified in IEC 60079-14.
NOTE 2 Group I installation requirements are presently not provided in IEC 60079-14. Installation requirements for
Group I are being considered.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day