SIST EN ISO 28721-3:2011

SLOVENSKI STANDARD
01-junij-2011
1DGRPHãþD
SIST EN 15159-3:2006
6WHNODVWLLQNHUDPLþQLHPDMOL(PDMOLUDQHQDSUDYH]DSURFHVQRRSUHPRGHO
2GSRUQRVWSURWLWRSORWQHPXXGDUX,62
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 3:
Thermal shock resistance (ISO 28721-3:2008)
Emails und Emaillierungen - Emaillierte Apparate für verfahrenstechnische Anlagen - Teil
3: Temperaturschockbeständigkeit (ISO 28721-3:2008)
Émaux vitrifiés - Appareils émaillés pour les installations industrielles - Partie 3:
Résistance au choc thermique (ISO 28721-3:2008)
Ta slovenski standard je istoveten z: EN ISO 28721-3:2011
ICS:
25.220.50 Emajlne prevleke Enamels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 28721-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2011
ICS 25.220.50 Supersedes EN 15159-3:2006
English Version
Vitreous and porcelain enamels - Glass-lined apparatus for
process plants - Part 3: Thermal shock resistance (ISO 28721-
3:2008)
Émaux vitrifiés - Appareils émaillés pour les installations Emails und Emaillierungen - Emaillierte Apparate für
industrielles - Partie 3: Résistance au choc thermique (ISO verfahrenstechnische Anlagen - Teil 3:
28721-3:2008) Temperaturschockbeständigkeit (ISO 28721-3:2008)
This European Standard was approved by CEN on 17 March 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28721-3:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO 28721-3:2008 has been prepared by Technical Committee ISO/TC 107 “Metallic and other
inorganic coatings” of the International Organization for Standardization (ISO) and has been taken over as
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at
the latest by October 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 15159-3:2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 28721-3:2008 has been approved by CEN as a EN ISO 28721-3:2011 without any
modification.
INTERNATIONAL ISO
STANDARD 28721-3
First edition
2008-12-01
Vitreous and porcelain enamels —
Glass-lined apparatus for process
plants —
Part 3:
Thermal shock resistance
Émaux vitrifiés — Appareils émaillés pour les installations
industrielles —
Partie 3: Résistance au choc thermique

Reference number
ISO 28721-3:2008(E)
©
ISO 2008
ISO 28721-3:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved

ISO 28721-3:2008(E)
Contents Page
Foreword. iv
1 Scope . 1
2 Terms and definitions. 1
3 Thermal shock diagram . 2
4 Heating/cooling diagram. 4
5 Quality designation. 6
Annex A (informative) Explanatory notes. 7
Bibliography . 8

ISO 28721-3:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 28721-3 was prepared by the European Committee for Standardization (CEN) (as EN 15159-3) and was
adopted, under a special “fast-track procedure”, by Technical Committee ISO/TC 107, Metallic and other
inorganic coatings, in parallel with its approval by the ISO member bodies.
ISO 28721 consists of the following parts, under the gener
...