SIST EN ISO 1483:2011
(Main)Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)
Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)
ISO 1483:2011 specifies the characteristics of slotted raised countersunk (oval) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
Linsensenk-Blechschrauben mit Schlitz (ISO 1483:2011)
Diese Internationale Norm legt die Eigenschaften von Linsensenk-Blechschrauben mit Schlitz mit Gewinde-größen von ST 2,2 bis einschließlich ST 9,5 fest.
Vis à tôle à tête fraisée bombée, fendue (ISO 1483:2011)
L'ISO 1483:2011 spécifie les caractéristiques des vis à tôle à tête fraisée bombée fendue, de diamètre de filetage ST 2,2 à ST 9,5 inclus.
Pločevinski vijaki z zarezano lečasto ugrezno glavo (ISO 1483:2011)
Ta mednarodni standard določa značilnosti pločevinskih vijakov z zarezano lečasto ugrezno glavo z velikostmi navojev od ST 2,2 do vključno ST 9,5.
General Information
- Status
- Published
- Public Enquiry End Date
- 24-Mar-2010
- Publication Date
- 14-Sep-2011
- Technical Committee
- ISEL - Mechanical elements
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 02-Sep-2011
- Due Date
- 07-Nov-2011
- Completion Date
- 15-Sep-2011
Relations
- Effective Date
- 01-Oct-2011
Overview
EN ISO 1483:2011 (adoption of ISO 1483:2011 by CEN) specifies the characteristics of slotted raised countersunk (oval) head tapping screws. The standard covers thread sizes ST 2,2 to ST 9,5 and defines head forms, dimensional limits, material and mechanical requirements, finishes, tolerances and acceptance rules for this family of tapping screws used primarily in sheet‑metal and thin‑section assemblies.
Keywords: EN ISO 1483:2011, slotted raised countersunk (oval) head tapping screws, tapping screws, ST 2,2, ST 9,5, fasteners standard
Key Topics
- Scope and thread range: Applies to slotted raised countersunk (oval) head tapping screws with thread sizes ST 2,2 through ST 9,5 inclusive.
- Head types and forms: Defines head variants (Type C, Type F, Type R) and associated dimensional gauges (see ISO 7721 for head configuration).
- Dimensions and preferred lengths: Specifies nominal and limit dimensions (head geometry, thread pitch, core diameters and preferred screw lengths) for each thread size.
- Materials and mechanical properties:
- Steel tapping screws in accordance with ISO 2702 (heat‑treated steel tapping screws).
- Corrosion‑resistant stainless steel grades per ISO 3506‑4 (A2‑20H, A4‑20H, A5‑20H).
- Product grade and hardness classes referenced in the standard.
- Finishes and coatings: Electroplating per ISO 4042, non‑electrolytically applied zinc‑flake coatings per ISO 10683, and passivation per ISO 16048.
- Tolerances and inspection: Dimensional tolerances per ISO 4759‑1; acceptance inspection criteria referenced to ISO 3269.
- Designation examples: e.g., "Tapping screw ISO 1483 - ST 3,5 × 16 - St - R" or "… - A4‑20H - R" for stainless variants.
Applications
- Used by fastener manufacturers to design and produce standardized tapping screws.
- Specified by mechanical, sheet‑metal and appliance designers for reliable fastening into thin materials.
- Employed by procurement specialists and quality/inspection teams to verify compliance and acceptance of supplied fasteners.
- Useful in industries such as HVAC, white goods, electrical enclosures, light automotive and general engineering where self‑tapping screws with a countersunk/oval head are required.
Related Standards
- ISO 225 - Symbols and descriptions of dimensions for fasteners
- ISO 1478 - Tapping screws thread
- ISO 2702 - Heat‑treated steel tapping screws - Mechanical properties
- ISO 3269 - Fasteners - Acceptance inspection
- ISO 3506‑4 - Stainless steel tapping screws - Mechanical properties
- ISO 4042, ISO 10683, ISO 16048, ISO 4759‑1, ISO 7721, ISO 8992
This concise summary helps engineers, manufacturers and procurement professionals locate and apply EN ISO 1483:2011 requirements for slotted raised countersunk (oval) head tapping screws in product design, specification and quality control.
Frequently Asked Questions
SIST EN ISO 1483:2011 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)". This standard covers: ISO 1483:2011 specifies the characteristics of slotted raised countersunk (oval) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
ISO 1483:2011 specifies the characteristics of slotted raised countersunk (oval) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
SIST EN ISO 1483:2011 is classified under the following ICS (International Classification for Standards) categories: 21.060.10 - Bolts, screws, studs. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 1483:2011 has the following relationships with other standards: It is inter standard links to SIST EN ISO 1483:1996. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 1483:2011 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN ISO 1483:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2011
1DGRPHãþD
SIST EN ISO 1483:1996
3ORþHYLQVNLYLMDNL]]DUH]DQROHþDVWRXJUH]QRJODYR ,62
Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)
Linsensenk-Blechschrauben mit Schlitz (ISO 1483:2011)
Vis à tôle à tête fraisée bombée, fendue (ISO 1483:2011)
Ta slovenski standard je istoveten z: EN ISO 1483:2011
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 1483
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2011
ICS 21.060.10 Supersedes EN ISO 1483:1994
English Version
Slotted raised countersunk (oval) head tapping screws (ISO
1483:2011)
Vis à tôle à tête fraisée bombée fendue (ISO 1483:2011) Linsensenk-Blechschrauben mit Schlitz (ISO 1483:2011)
This European Standard was approved by CEN on 1 July 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1483:2011: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 1483:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2012, and conflicting national standards shall be withdrawn
at the latest by February 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1483:1994.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 1483:2011 has been approved by CEN as a EN ISO 1483:2011 without any modification.
INTERNATIONAL ISO
STANDARD 1483
Second edition
2011-08-01
Slotted raised countersunk (oval) head
tapping screws
Vis à tôle à tête fraisée bombée fendue
Reference number
ISO 1483:2011(E)
©
ISO 2011
ISO 1483:2011(E)
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
ISO 1483:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
T
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...