SIST EN 2591-708:2004
(Main)Aerospace series - Elements of electrical and optical connection - Test methods - Part 708: Electrical elements - Measurement of surface transfer impedance of couplers
Aerospace series - Elements of electrical and optical connection - Test methods - Part 708: Electrical elements - Measurement of surface transfer impedance of couplers
This standard specifies a method of measuring the surface transfer impedance of couplers.
It shall be used together with EN 2591-100.
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 708: Elektrische Elemente - Messung des Schirmkopplungswiderstandes von Kopplern
Diese Norm legt ein Verfahren zum Messen des Schirmkopplungswiderstandes von Kopplern fest.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 708 : Organes électriques - Mesure de l'impédance de transfert de surface de coupleurs
La présente norme spécifie une méthode pour mesurer l'impédance de transfert de surface de coupleurs.
Elle doit etre utilisée conjointement avec EN 2591-100.
Aerospace series - Elements of electrical and optical connection - Test methods - Part 708: Electrical elements - Measurement of surface transfer impedance of couplers
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 708: Electrical elements - Measurement of surface transfer impedance of couplersLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 708: Elektrische Elemente - Messung des Schirmkopplungswiderstandes von KopplernSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 708 : Organes électriques - Mesure de l'impédance de transfert de surface de coupleursAerospace series - Elements of electrical and optical connection - Test methods - Part 708: Electrical elements - Measurement of surface transfer impedance of couplers49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-708:2001SIST EN 2591-708:2004en01-maj-2004SIST EN 2591-708:2004SLOVENSKI
STANDARD
SIST EN 2591-708:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-708November 2001ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 708: Electrical elements - Measurement ofsurface transfer impedance of couplersSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 708: Organesélectriques - Mesure de l'impédance de transfert de surfacede coupleursLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 708:Elektrische Elemente - Messung desSchirmkopplungswiderstandes von KopplernThis European Standard was approved by CEN on 4 June 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.