SIST EN 12596:2014
(Main)Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary
Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary
This European Standard specifies a method for the determination of the dynamic viscosity of bituminous binders by means of a vacuum capillary viscometer at 60 °C in a range between 0,003 6 Pa . s to over 580 000 Pa . s. Bituminous emulsions are not within the scope of this method.
NOTE 1 Emulsions containing bituminous binders are not considered to be covered by this method. This method can be used for anhydrous binders obtained from emulsions (stabilised and/or recovered binders).
NOTE 2 The viscosity behaviour of some polymer modified bitumens (PMB) is not demonstrated in a vacuum capillary viscometer. Other methods are more relevant.
WARNING - Use of this European Standard can involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der dynamischen Viskosität mit Vakuum-Kapillaren
Diese Europäische Norm legt ein Verfahren zur Bestimmung der dynamischen Viskosität von bitumenhaltigen Bindemitteln mit Hilfe eines Vakuum-Kapillar-Viskosimeters bei 60 °C im Bereich von 0,003 6 Pa s bis über 580 000 Pa s fest. Dieses Verfahren gilt nicht für Bitumenemulsionen.
ANMERKUNG 1 Emulsionen, die bitumenhaltige Bindemittel enthalten, gelten als von diesem Verfahren nicht betroffen. Das Verfahren kann auf wasserfreie Bindemittel angewendet werden, die aus Emulsionen erhalten wurden (stabilisierte und/oder rückgewonnene Bindemittel).
ANMERKUNG 2 Das Viskositätsverhalten von einigen polymermodifizierten Bitumensorten (PmB) lässt sich mit einem Vakuum-Kapillar-Viskosimeter nicht darstellen. Andere Verfahren sind besser geeignet.
WARNUNG — Die Anwendung dieser Europäischen Norm kann den Umgang mit gefährlichen Substanzen und Ausrüstungsteilen und die Ausführung gefährlicher Arbeitsgänge einschließen. Diese Europäische Norm erhebt nicht den Anspruch, alle mit ihrer Anwendung verbundenen Sicherheitsprobleme anzusprechen. Es liegt in der Verantwortung des Anwenders dieser Europäischen Norm, geeignete Verhaltensregeln zur Sicherheit und Gesundheit festzulegen und die Anwendbarkeit ein¬schränkender Vorschriften vor der Anwendung zu bestimmen.
Bitumes et liants bitumineux - Détermination de la viscosité dynamique par viscosimètre capillaire sous vide
La présente Norme européenne prescrit une méthode pour la détermination de la viscosité dynamique de liants bitumineux au moyen d’un viscosimètre capillaire sous vide à 60 °C dans un intervalle de 0,003 6 Pa•s à plus de 580 000 Pa•s. Le domaine d'application de la présente méthode ne comprend pas les émulsions bitumineuses.
NOTE 1 La présente méthode est considérée comme ne s’appliquant pas aux émulsions contenant des liants bitumineux. Elle peut être utilisée pour les liants anhydres obtenus à partir d’émulsions (liants stabilisés et/ou récupérés).
NOTE 2 Le comportement visqueux particulier de certains bitumes modifiés par des polymères (BMP) n’est pas mis en évidence dans un viscosimètre capillaire sous vide. D’autres méthodes sont plus appropriées.
AVERTISSEMENT — L'utilisation de la présente Norme européenne peut nécessiter des produits, des opérations et des équipements dangereux. La présente Norme européenne n'est pas censée aborder tous les problèmes de sécurité concernés par son utilisation. Il est de la responsabilité de l'utilisateur de la présente Norme européenne d'établir des pratiques de sécurité et d'hygiène appropriées et de déterminer si des restrictions réglementaires sont applicables avant son utilisation.
Bitumen in bitumenska veziva - Določanje dinamične viskoznosti z metodo kapilare z vakuumom
Ta evropski standard določa metodo za določanje dinamične viskoznosti bitumenskih veziv z vakuumskim kapilarnim viskozimetrom pri 60 °C v razponu od 0.003 6 Pa . s do 580 000 Pa . s. Bitumenske emulzije niso zajete v tej metodi.
OPOMBA 1 Emulzij z bitumenskimi vezivi ta metoda ne zajema. Ta metoda se lahko uporablja za brezvodna veziva, pridobljena iz emulzij (stabilizirana in/ali ponovno pridobljena veziva).
OPOMBA 2 Viskoznost nekaterih veziv, modificiranih s polimeri (PMB) ni prikazana v vakuumskem kapilarnem viskozimetru. Druge metode so ustreznejše.
OPOZORILO – pri uporabi tega evropskega standarda so lahko prisotni nevarni materiali, postopki in oprema. Ta evropski standard ne obravnava vseh varnostnih težav, ki se nanašajo na njegovo uporabo. Za vzpostavitev ustreznih varnostnih in zdravstvenih praks ter za določitev uporabnosti regulativnih omejitev pred uporabo je odgovoren uporabnik tega evropskega standarda.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PHWRGRBitumen und bitumenhaltige Bindemittel - Bestimmung der dynamischen Viskosität mit Vakuum-KapillarenBitumes et liants bitumineux - Détermination de la viscosité dynamique par viscosimètre capillaire sous videBitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 12596:2014SIST EN 12596:2014en,fr,de01-december-2014SIST EN 12596:2014SLOVENSKI
STANDARDSIST EN 12596:20071DGRPHãþD
SIST EN 12596:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12596
November 2014 ICS 75.140; 91.100.50 Supersedes EN 12596:2007English Version
Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary
Bitumes et liants bitumineux - Détermination de la viscosité dynamique par viscosimètre capillaire sous vide
Bitumen und bitumenhaltige Bindemittel - Bestimmung der dynamischen Viskosität mit Vakuum-Kapillaren This European Standard was approved by CEN on 16 August 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12596:2014 ESIST EN 12596:2014
EN 12596:2014 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Principle .5 5 Apparatus .5 6 Preparation of test samples .7 7 Procedure .7 8 Calculation .8 9 Expression of results .8 10 Precision .8 11 Test report .9 Annex A (normative)
Specifications of viscometers . 10 Annex B (informative)
Calibration of viscometers . 16 Annex C (informative)
Characteristics of thermometer. 18 Bibliography .
...
SLOVENSKI STANDARD
oSIST prEN 12596:2013
01-april-2013
%LWXPHQLQELWXPHQVNDYH]LYD'RORþDQMHGLQDPLþQHYLVNR]QRVWL]PHWRGR
NDSLODUH]YDNXXPRP
Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum
capillary
Bitumen und bitumenhaltige Bindemittel - Bestimmung der dynamischen Viskosität mit
Vakuum-Kapillaren
Bitumes et liants bitumineux - Détermination de la viscosité dynamique par viscosimètre
capillaire sous vide
Ta slovenski standard je istoveten z: prEN 12596
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
oSIST prEN 12596:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12596:2013
---------------------- Page: 2 ----------------------
oSIST prEN 12596:2013
EUROPEAN STANDARD
DRAFT
prEN 12596
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2013
ICS 75.140; 91.100.50 Will supersede EN 12596:2007
English Version
Bitumen and bituminous binders - Determination of dynamic
viscosity by vacuum capillary
Bitumes et liants bitumineux - Détermination de la viscosité Bitumen und bitumenhaltige Bindemittel - Bestimmung der
dynamique par viscosimètre capillaire sous vide dynamischen Viskosität mit Vakuum-Kapillaren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 336.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12596:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12596:2013
prEN 12596:2013 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle .5
5 Apparatus .5
6 Preparation of test samples .7
7 Procedure .7
8 Calculation .8
9 Expression of results .8
10 Precision .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.