SIST EN 13564-3:2004
(Main)Anti-flooding devices for buildings - Part 3: Quality assurance
Anti-flooding devices for buildings - Part 3: Quality assurance
This European Standard specifies the requirements for anti-flooding devices for buildings to ensure conformity of these products with EN 13564-1.
Rückstauverschlüsse für Gebäude - Teil 3: Güteüberwachung
Diese Europäische Norm legt Anforderungen für die Güteüberwachung von Rückstauverschlüssen für Gebäude fest, um die Übereinstimmung dieser Produkte mit EN 13564-1 sicherzustellen.
Clapets anti-retour pour les bâtiments - Partie 3: Maîtrise de la qualité
La présente norme prescrit les exigences relatives aux clapets anti-retour pour les bâtiments, de manière à garantir la conformité de ces produits avec l'EN 13564-1..
Naprave za preprečevanje poplav v stavbah - 3. del: Zagotavljanje kakovosti
General Information
Overview
EN 13564-3:2003 - "Anti-flooding devices for buildings - Part 3: Quality assurance" (CEN) defines the quality assurance requirements for anti-flooding devices to ensure conformity with EN 13564-1. It complements EN 13564-1 (requirements) and EN 13564-2 (test methods) by specifying how manufacturers must control production, document processes and demonstrate ongoing compliance. Annex A recommends third‑party control procedures.
Key topics and requirements
- Scope and references
- Links directly to EN 13564-1:2002 (product requirements) and EN 13564-2:2002 (test methods).
- Quality assurance elements
- Two mandatory pillars:
- Type testing: Manufacturer keeps full drawings; test three production specimens per EN 13564-2. If design or materials change, repeat three-specimen tests. Retain full test reports.
- Factory production control (FPC): Continuous control to ensure production meets EN 13564-1. FPC may be organized per EN ISO 9001.
- Two mandatory pillars:
- Factory production control minimum items (from Table 1)
- Materials (supplier certificates)
- Appearance (visual inspection)
- Dimensions (measurement)
- Tightness (tests per EN 13564-2)
- Marking
- Note: For device types 4 and 5, inspections also include items in EN 1253-3.
- Documentation and organization
- Maintain document control, non-conforming product procedures, complaint handling, calibration of test equipment, an organizational scheme, skilled personnel, and a quality plan specifying inspection methods and frequencies.
- Third‑party control (Annex A, informative)
- Recommended independent certification covering approval of type testing, evaluation of production/testing facilities and staff, review of FPC, and independent testing.
- Unannounced inspector visits: normally twice a year, reducible to once a year after two years without failures.
- Failure handling and retesting procedures: if a unit fails, test three more; on continued failures, production may be suspended and a reassessment (six units) is required before resuming deliveries.
Applications and who uses it
- Manufacturers of anti‑flooding devices (design, production control and certification)
- Certification and testing laboratories implementing EN 13564-2 test methods
- Third‑party certification bodies assessing factory production control
- Specifiers, consultants, building owners, and regulators requiring proof of conformity with EN 13564 series
- Installers and procurement teams needing documented quality assurance for flood‑protection products
Related standards
- EN 13564-1:2002 - Anti-flooding devices - Part 1: Requirements
- EN 13564-2:2002 - Anti-flooding devices - Part 2: Test methods
- EN 1253-3 - Gullies for buildings - Part 3: Quality Control (referenced for certain device types)
- EN ISO 9001 - Quality management systems - Requirements
Keywords: EN 13564-3:2003, anti-flooding devices, quality assurance, factory production control, type testing, third‑party control, CEN, EN 13564-1, EN 13564-2.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Rückstauverschlüsse für Gebäude - Teil 3: GüteüberwachungClapets anti-retour pour les bâtiments - Partie 3: Maîtrise de la qualitéAnti-flooding devices for buildings - Part 3: Quality assurance91.140.80Drenažni sistemiDrainage systemsICS:Ta slovenski standard je istoveten z:EN 13564-3:2003SIST EN 13564-3:2004en01-maj-2004SIST EN 13564-3:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13564-3November 2003ICS 91.140.80English versionAnti-flooding devices for buildings - Part 3: Quality assuranceClapets anti-retour pour les bâtiments - Partie 3: Maîtrisede la qualitéRückstauverschlüsse für Gebäude - Teil 3:GüteüberwachungThis European Standard was approved by CEN on 1 September 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13564-3:2003 ESIST EN 13564-3:2004
Control by third party (third party control).7A.1General.7A.2Procedure of the third party control.7A.3Report by third party.8A.4Retesting.8Bibliography.9SIST EN 13564-3:2004
...
Frequently Asked Questions
SIST EN 13564-3:2004 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Anti-flooding devices for buildings - Part 3: Quality assurance". This standard covers: This European Standard specifies the requirements for anti-flooding devices for buildings to ensure conformity of these products with EN 13564-1.
This European Standard specifies the requirements for anti-flooding devices for buildings to ensure conformity of these products with EN 13564-1.
SIST EN 13564-3:2004 is classified under the following ICS (International Classification for Standards) categories: 91.140.80 - Drainage systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13564-3:2004 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 13564-3:2004 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...