SIST EN 300 440-2 V1.1.2:2005

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.NYHQþQHP577(Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 300 440-2 Version 1.1.2SIST EN 300 440-2 V1.1.2:2005en01-februar-2005SIST EN 300 440-2 V1.1.2:2005SLOVENSKI
STANDARD
ETSI ETSI EN 300 440-2 V1.1.2 (2004-07) 2
Reference REN/ERM-TG28-0414 Keywords radio, regulation, SRD, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editor@etsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2004. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 300 440-2 V1.1.2:2005

ETSI ETSI EN 300 440-2 V1.1.2 (2004-07) 3
Contents Intellectual Property Rights.4 Foreword.4 Introduction.5 1 Scope.7 2 References.8 3 Definitions, symbols and abbreviations.8 3.1 Definitions.8 3.2 Symbols.8 3.3 Abbreviations.8 4 Technical requirements specifications.8 4.1 Transmitter requirements.8 4.1.1 Equivalent isotropically radiated power.8 4.1.2 Permitted range of operating frequencies.9 4.1.3 Spurious emissions.9 4.1.4 Duty cycle.9 4.2 Receiver requirements.9 4.2.1 Adjacent channel selectivity-in-band.9 4.2.2 Adjacent band selectivity.9 4.2.3 Blocking or desensitization.9 4.2.4 Spurious radiations.9 4.3 Power limits for 2,45 GHz RFID systems.9 5 Testing for compliance with technical requirements.10 5.1 Essential radio test suites.10 5.1.1 Environmental conditions for testing.10 5.1.1.1 Normal and extreme test-conditions.10 5.1.1.2 Test power source.10 5.1.2 Choice of samples for test suites.10 5.1.3 Transmitter test suites.10 5.1.3.1 Equivalent isotropically radiated power.10 5.1.3.2 Permitted range of operation frequencies.10 5.1.3.3 Spurious emissions.10 5.1.4 Receiver test suites.11 5.1.4.1 Spurious radiations.11 5.2 Other test specifications.11 6 Interpretation of measurement results.11 History.13
ETSI ETSI EN 300 440-2 V1.1.2 (2004-07) 4
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [2] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive"). The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range, as identified below: Part 1: "Technical characteristics and test methods"; Part 2: "Harmonized EN under article 3.2 of the R&TTE Directive".
National transposition dates Date of latest announcement of this EN (doa): 31 October 2004 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 April 2005 Date of withdrawal of any conflicting National Standard (dow): 30 April 2006
ETSI ETSI EN 300 440-2 V1.1.2 (2004-07) 5
Introduction The present document is part of a set of standards designed to fit in a modular structure to cover all radio and telecommunications terminal equipment under the R&TTE Directive [1]. Each standard is a module in the structure. The modular structure is shown in figure 1. New standard for Health for radio (if needed) Use of spectrum * If needed Scoped by
equipment
class or type Scoped by frequency and/or equipment type Disability* Privacy* Fraud* No harm to the network* Emergency* Interworking via
the network* Interworking with the network Non-radio Radio (RE) Non-TTE TTE 3.1a/b 3.2 3.3c 3.3b 3.3a 3.3d 3.3e 3.3f Radio product EMC Proposed single standard Standards notified under EMC Directive Standards notified under LVD Directive ( incl
acoustic safety if needed)
Figure 1: Modular structure for the various standards used under the R&TTE Directive [1] SIST EN 300 440-2 V1.1.2:2005

ETSI ETSI EN 300 440-2 V1.1.2 (2004-07) 6
The left hand edge of the figure shows the different clauses of article 3 of the Directive. The vertical boxes show the standards under article 3.2 for the use of the radio spectrum. The scopes of these standards are specified either by frequency (normally in the case where frequency bands are harmonized) or by radio equipment type. For article 3.3 various horizontal boxes are shown. Their dotted lines indicate that essential requirements in these areas have to be adopted by the Commission. If such essential requirements are adopted, and as far and as long as they are applicable, they will justify individual standards whose scope is likely to be specified by functi
...