SIST EN 302 885-3 V1.1.1:2011
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM) - Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC - Part 3: Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive
- Abstract
The present document states the minimum technical characteristics and methods of measurement required for portable Very High Frequency (VHF) radiotelephones with integrated handheld class D DSC operating in certain frequency bands allocated to the maritime mobile service using either 25 kHz channels or 25 kHz and 12,5 kHz channels.
The present document also specifies technical characteristics, methods of measurement and required test results.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.1] (R&TTE Directive) article 3.3(e), which states that radio equipment within the scope of the present document shall be so constructed that:
"it supports certain features ensuring access to emergency services".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [i.1] will apply to equipment within the scope of the present document.
- Status
- Published
- Publication Date
- 16-Oct-2011
- Technical Committee
- MOC - Mobile Communications
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 30-Sep-2011
- Due Date
- 05-Dec-2011
- Completion Date
- 17-Oct-2011
Buy Documents
en_30288503v010101o - Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 3: Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive
en_30288503v010101p - Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 3: Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive
SIST EN 302 885-3 V1.1.1:2011 is the Slovenian standard identical to ETSI EN 302 885-3 V1.1.1, a Harmonized European Standard for portable Very High Frequency (VHF) radiotelephones with integrated handheld class D Digital Selective Calling (DSC) used in the maritime mobile service. It specifies the minimum technical characteristics, measurement methods, and test results needed to support emergency-service access features under article 3.3(e) of the R&TTE Directive.
What does SIST EN 302 885-3 V1.1.1:2011 specify?
SIST EN 302 885-3 V1.1.1:2011 covers portable VHF radiotelephone equipment for maritime use in certain frequency bands, using either 25 kHz channels or 25 kHz and 12,5 kHz channels. It is part 3 of a multi-part deliverable: Part 1 provides the technical characteristics and measurement methods, Part 2 covers article 3.2, and this part covers article 3.3(e).
The document is organized into scope, references, definitions and abbreviations, technical requirements, testing for compliance, and two annexes.
| Annex | What it covers |
|---|---|
| Annex A | HS Requirements and conformance Test specifications Table (HS-RTT) for presumption of conformity with article 3.3(e) |
| Annex B | The EN title in the official languages |
What are the key requirements of SIST EN 302 885-3 V1.1.1:2011?
SIST EN 302 885-3 V1.1.1:2011 uses the requirements and test methods from EN 302 885-1 for most detailed technical points, and it adds the specific conformity checks needed for article 3.3(e). In practice, the document ties emergency-service support to measurable radio, audio, and environmental performance.
Environmental conditions and general obligations
- Clause 4.1 requires testing at representative points within the declared operational environmental profile. This matters because the equipment must be shown to work in the conditions it is intended for, not just in a single lab setting.
- Clauses 4.2.1 and 4.2.2 require the manufacturer to declare compliance with the general/operational requirements and the technical requirements, with relevant documentation. This means the technical file must support the claim.
Environmental robustness
- Clause 4.3 covers the drop test and temperature tests: dry heat, damp heat, and low temperature. Each of these uses the performance check defined in EN 302 885-1.
- Clause 5.3.1 requires environmental tests to be performed before the other requirement tests on the same equipment. That sequence matters because physical stress can change later measurements.
Radio and audio performance
- Clauses 4.4.1 to 4.4.4 cover sensitivity of the modulator including microphone, audio frequency response, audio frequency harmonic distortion of the emission, and residual modulation of the transmitter. These are the core checks on how clearly the unit sends speech and signalling.
- Clauses 4.4.5 to 4.4.10 cover harmonic distortion and rated audio-frequency output power, receiver audio frequency response, receiver noise and hum level, squelch operation, squelch hysteresis, and receiver scanning efficiency. In practice, these tests show whether the receiver and audio path remain usable in marine service.
Test reporting and measurement uncertainty
- Clause 5.2 requires the measured value, the corresponding limit, and the measurement uncertainty to be recorded in the test report. Uncertainty must be calculated in line with TR 100 028-1, and the reported uncertainty must stay within the limits in Table 1.
- Annex A classifies requirements as unconditional or conditional, and test specifications as Essential or Other. For a presumption of conformity, the Essential test suite is the key set to complete.
What terms does SIST EN 302 885-3 V1.1.1:2011 define?
- class D - A VHF DSC class intended to provide minimum facilities for distress, urgency, safety, routine calling, and reception.
- environmental profile - The declared range of environmental conditions under which the equipment must comply with the document.
- Digital Selective Calling (DSC) - The digital calling and distress signalling function used in maritime radio services.
- Global Maritime Distress and Safety System (GMDSS) - The maritime distress and safety framework referenced by the document.
- G2B - Phase modulation with digital information and a sub-carrier for DSC operation.
- G3E - Phase modulation for speech, with 6 dB/octave pre-emphasis.
- Radio and Telecommunications Terminal Equipment (R&TTE) - The EU directive framework named in the scope and annexes.
- Very High Frequency (VHF) - The radio band used by the equipment covered by the standard.
Who uses SIST EN 302 885-3 V1.1.1:2011?
SIST EN 302 885-3 V1.1.1:2011 is used by manufacturers of portable maritime VHF radiotelephones, test laboratories, and compliance teams working on R&TTE-related conformity assessment. It is also useful for quality managers and buyers who need to check that a product has been designed and tested for maritime emergency-service features, environmental stress, and audio/radio performance.
Which standards are used with SIST EN 302 885-3 V1.1.1:2011?
The key normative references are:
- ETSI EN 302 885-1 (V1.1.1) - Provides the base technical characteristics, methods of measurement, limits, and test definitions reused throughout this part.
- ETSI TR 100 028-1 (V1.4.1) - Provides the method for calculating measurement uncertainty used in the test reports.
The document also points to ETSI EG 201 399 for the modular structure used for R&TTE Harmonized Standards.
What does the SIST EN 302 885-3 V1.1.1:2011 document contain?
The document contains clause-by-clause technical requirements, test definitions, test limits, and conformance instructions for the emergency-service-related features covered by article 3.3(e). It includes the measurement conditions, the rule for interpreting test results, and a table of maximum measurement uncertainty values for different parameters.
It also contains the essential radio test suite and the other test suite used to verify receiver and audio performance. Annex A provides the HS-RTT mapping between requirements and test specifications, which is the main cross-reference tool for conformity work.
Annex B gives the title in the official languages.
Buy Documents
en_30288503v010101o - Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 3: Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive
en_30288503v010101p - Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 3: Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive
Get Certified
Connect with accredited certification bodies for this standard
DNV
DNV is an independent assurance and risk management provider.
Lloyd's Register
Lloyd's Register is a global professional services organisation specialising in engineering and technology.
FSC International
Forest Stewardship Council certification.
Sponsored listings
Frequently Asked Questions
SIST EN 302 885-3 V1.1.1:2011 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM) - Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC - Part 3: Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive". This standard covers: The present document states the minimum technical characteristics and methods of measurement required for portable Very High Frequency (VHF) radiotelephones with integrated handheld class D DSC operating in certain frequency bands allocated to the maritime mobile service using either 25 kHz channels or 25 kHz and 12,5 kHz channels. The present document also specifies technical characteristics, methods of measurement and required test results. The present document is intended to cover the provisions of Directive 1999/5/EC [i.1] (R&TTE Directive) article 3.3(e), which states that radio equipment within the scope of the present document shall be so constructed that: "it supports certain features ensuring access to emergency services". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [i.1] will apply to equipment within the scope of the present document.
The present document states the minimum technical characteristics and methods of measurement required for portable Very High Frequency (VHF) radiotelephones with integrated handheld class D DSC operating in certain frequency bands allocated to the maritime mobile service using either 25 kHz channels or 25 kHz and 12,5 kHz channels. The present document also specifies technical characteristics, methods of measurement and required test results. The present document is intended to cover the provisions of Directive 1999/5/EC [i.1] (R&TTE Directive) article 3.3(e), which states that radio equipment within the scope of the present document shall be so constructed that: "it supports certain features ensuring access to emergency services". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [i.1] will apply to equipment within the scope of the present document.
SIST EN 302 885-3 V1.1.1:2011 is classified under the following ICS (International Classification for Standards) categories: 33.060.20 - Receiving and transmitting equipment; 33.100.01 - Electromagnetic compatibility in general; 47.020.70 - Navigation and control equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 302 885-3 V1.1.1:2011 is associated with the following European legislation: EU Directives/Regulations: 1999/5/EC, TRRTP124. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 302 885-3 V1.1.1:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
Final draft ETSI EN 302 885-3 V1.1.1 (2011-05)
Harmonized European Standard
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Portable Very High Frequency (VHF) radiotelephone
equipment for the maritime mobile service operating
in the VHF bands with integrated handheld class D DSC;
Part 3: Harmonized EN covering the essential requirements
of article 3.3(e) of the R&TTE Directive
2 Final draft ETSI EN 302 885-3 V1.1.1 (2011-05)
Reference
DEN/ERM-TG26-086-3
Keywords
DSC, maritime, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Final draft ETSI EN 302 885-3 V1.1.1 (2011-05)
Contents
Intellectual Property Rights . 6
Foreword . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions and abbreviations . 8
3.1 Definitions . 8
3.2 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 General, operational and technical requirements . 9
4.2.1 General and operational requirements . 9
4.2.1.1 Requirements . 9
4.2.1.2 Conformance . 9
4.2.2 Technical requirements . 9
4.2.2.1 Requirements . 9
4.2.2.2 Conformance . 9
4.3 Environmental requirements . 9
4.3.1 Drop test . 9
4.3.1.1 Definition . 9
4.3.1.2 Requirement . 9
4.3.1.3 Conformance . 9
4.3.2 Temperature tests . 9
4.3.2.1 Definition . 9
4.3.2.2 Dry heat . 9
4.3.2.2.1 Definition. 9
4.3.2.2.2 Requirement . 10
4.3.2.2.3 Conformance . 10
4.3.2.3 Damp heat . 10
4.3.2.3.1 Definition. 10
4.3.2.3.2 Requirement . 10
4.3.2.3.3 Conformance . 10
4.3.2.4 Low temperature . 10
4.3.2.4.1 Definition. 10
4.3.2.4.2 Requirement . 10
4.3.2.4.3 Conformance . 10
4.4 Conformance requirements . 10
4.4.1 Sensitivity of the modulator, including microphone . 10
4.4.1.1 Definition . 10
4.4.1.2 Limit . 10
4.4.1.3 Conformance . 10
4.4.2 Audio frequency response . 11
4.4.2.1 Definition . 11
4.4.2.2 Limit . 11
4.4.2.3 Conformance . 11
4.4.3 Audio frequency harmonic distortion of the emission . 11
4.4.3.1 Definition . 11
4.4.3.2 Limit . 11
4.4.3.3 Conformance . 11
4.4.4 Residual modulation of the transmitter . 11
4.4.4.1 Definition . 11
ETSI
4 Final draft ETSI EN 302 885-3 V1.1.1 (2011-05)
4.4.4.2 Limit . 11
4.4.4.3 Conformance . 11
4.4.5 Harmonic distortion and rated audio-frequency output power . 11
4.4.5.1 Definition . 11
4.4.5.2 Limit . 11
4.4.5.3 Conformance . 11
4.4.6 Receiver audio frequency response . 12
4.4.6.1 Definition . 12
4.4.6.2 Limit . 12
4.4.6.3 Conformance . 12
4.4.7 Receiver noise and hum level . 12
4.4.7.1 Definition . 12
4.4.7.2 Limit . 12
4.4.7.3 Conformance . 12
4.4.8 Squelch operation . 12
4.4.8.1 Definition . 12
4.4.8.2 Limit . 12
4.4.8.3 Conformance . 12
4.4.9 Squelch hysteresis . 12
4.4.9.1 Definition . 12
4.4.9.2 Limit . 12
4.4.9.3 Conformance . 12
4.4.10 Receiver scanning efficiency . 13
4.4.10.1 Definition . 13
4.4.10.2 Limit . 13
4.4.10.3 Conformance . 13
5 Testing for compliance with technical requirements . 13
5.1 Test conditions, power supply and ambient temperatures . 13
5.2 Interpretation of the measurement results . 13
5.3 Essential radio test suites . 14
5.3.1 Environmental tests. 14
5.3.1.1 Introduction . 14
5.3.1.2 Procedure . 14
5.3.1.3 Performance check . 14
5.3.1.4 Drop test . 14
5.3.1.4.1 Definition. 14
5.3.1.4.2 Limit . 14
5.3.1.4.3 Conformance . 14
5.3.1.5 Temperature tests . 15
5.3.1.5.1 Dry heat . 15
5.3.1.5.1.1 Definition . 15
5.3.1.5.1.2 Limit . 15
5.3.1.5.1.3 Confor ma nce . 15
5.3.1.5.2 Damp heat . 15
5.3.1.5.2.1 Definition . 15
5.3.1.5.2.2 Limit . 15
5.3.1.5.2.3 Confor ma nce . 15
5.3.1.5.3 Low temperature . 15
5.3.1.5.3.1 Definition . 15
5.3.1.5.3.2 Limit . 15
5.3.1.5.3.3 Confor ma nce . 15
5.3.2 Conformance tests . 15
5.3.2.1 Sensitivity of the modulator, including microphone . 15
5.3.2.2 Audio frequency response . 15
5.3.2.3 Audio frequency harmonic distortion of the emission . 16
5.3.2.4 Residual modulation of the transmitter . 16
5.4 Other test suites . 16
5.4.1 General . 16
5.4.2 Harmonic distortion and rated audio-frequency output power . 16
5.4.3 Receiver audio frequency response . 16
5.4.4 Receiver noise and hum level . 16
ETSI
5 Final draft ETSI EN 302 885-3 V1.1.1 (2011-05)
5.4.5 Squelch operation . 16
5.4.6 Squelch hysteresis . 16
5.4.7 Receiver scanning efficiency . 16
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 17
Annex B (informative): The EN title in the official languages . 19
History . 20
ETSI
6 Final draft ETSI EN 302 885-3 V1.1.1 (2011-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This final draft Harmonized European Standard (EN) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the ETSI standards
One-step Approval Procedure.
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.2] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1].
See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.1] are summarised in annex A.
The present document is part 3 of a multi-part deliverable covering the Electromagnetic compatibility and Radio
spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile
service operating in the VHF bands with integrated handheld class D DSC, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Di
...
Harmonized European Standard
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Portable Very High Frequency (VHF) radiotelephone
equipment for the maritime mobile service operating
in the VHF bands with integrated handheld class D DSC;
Part 3: Harmonized EN covering the essential requirements
of article 3.3(e) of the R&TTE Directive
2 ETSI EN 302 885-3 V1.1.1 (2011-09)
Reference
DEN/ERM-TG26-086-3
Keywords
DSC, maritime, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 302 885-3 V1.1.1 (2011-09)
Contents
Intellectual Property Rights . 6
Foreword . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions and abbreviations . 8
3.1 Definitions . 8
3.2 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 General, operational and technical requirements . 9
4.2.1 General and operational requirements . 9
4.2.1.1 Requirements . 9
4.2.1.2 Conformance . 9
4.2.2 Technical requirements . 9
4.2.2.1 Requirements . 9
4.2.2.2 Conformance . 9
4.3 Environmental requirements . 9
4.3.1 Drop test . 9
4.3.1.1 Definition . 9
4.3.1.2 Requirement . 9
4.3.1.3 Conformance . 9
4.3.2 Temperature tests . 9
4.3.2.1 Definition . 9
4.3.2.2 Dry heat . 9
4.3.2.2.1 Definition. 9
4.3.2.2.2 Requirement . 10
4.3.2.2.3 Conformance . 10
4.3.2.3 Damp heat . 10
4.3.2.3.1 Definition. 10
4.3.2.3.2 Requirement . 10
4.3.2.3.3 Conformance . 10
4.3.2.4 Low temperature . 10
4.3.2.4.1 Definition. 10
4.3.2.4.2 Requirement . 10
4.3.2.4.3 Conformance . 10
4.4 Conformance requirements . 10
4.4.1 Sensitivity of the modulator, including microphone . 10
4.4.1.1 Definition . 10
4.4.1.2 Limit . 10
4.4.1.3 Conformance . 10
4.4.2 Audio frequency response . 11
4.4.2.1 Definition . 11
4.4.2.2 Limit . 11
4.4.2.3 Conformance . 11
4.4.3 Audio frequency harmonic distortion of the emission . 11
4.4.3.1 Definition . 11
4.4.3.2 Limit . 11
4.4.3.3 Conformance . 11
4.4.4 Residual modulation of the transmitter . 11
4.4.4.1 Definition . 11
ETSI
4 ETSI EN 302 885-3 V1.1.1 (2011-09)
4.4.4.2 Limit . 11
4.4.4.3 Conformance . 11
4.4.5 Harmonic distortion and rated audio-frequency output power . 11
4.4.5.1 Definition . 11
4.4.5.2 Limit . 11
4.4.5.3 Conformance . 11
4.4.6 Receiver audio frequency response . 12
4.4.6.1 Definition . 12
4.4.6.2 Limit . 12
4.4.6.3 Conformance . 12
4.4.7 Receiver noise and hum level . 12
4.4.7.1 Definition . 12
4.4.7.2 Limit . 12
4.4.7.3 Conformance . 12
4.4.8 Squelch operation . 12
4.4.8.1 Definition . 12
4.4.8.2 Limit . 12
4.4.8.3 Conformance . 12
4.4.9 Squelch hysteresis . 12
4.4.9.1 Definition . 12
4.4.9.2 Limit . 12
4.4.9.3 Conformance . 12
4.4.10 Receiver scanning efficiency . 13
4.4.10.1 Definition . 13
4.4.10.2 Limit . 13
4.4.10.3 Conformance . 13
5 Testing for compliance with technical requirements . 13
5.1 Test conditions, power supply and ambient temperatures . 13
5.2 Interpretation of the measurement results . 13
5.3 Essential radio test suites . 14
5.3.1 Environmental tests. 14
5.3.1.1 Introduction . 14
5.3.1.2 Procedure . 14
5.3.1.3 Performance check . 14
5.3.1.4 Drop test . 14
5.3.1.4.1 Definition. 14
5.3.1.4.2 Limit . 14
5.3.1.4.3 Conformance . 14
5.3.1.5 Temperature tests . 15
5.3.1.5.1 Dry heat . 15
5.3.1.5.1.1 Definition . 15
5.3.1.5.1.2 Limit . 15
5.3.1.5.1.3 Confor ma nce . 15
5.3.1.5.2 Damp heat . 15
5.3.1.5.2.1 Definition . 15
5.3.1.5.2.2 Limit . 15
5.3.1.5.2.3 Confor ma nce . 15
5.3.1.5.3 Low temperature . 15
5.3.1.5.3.1 Definition . 15
5.3.1.5.3.2 Limit . 15
5.3.1.5.3.3 Confor ma nce . 15
5.3.2 Conformance tests . 15
5.3.2.1 Sensitivity of the modulator, including microphone . 15
5.3.2.2 Audio frequency response . 15
5.3.2.3 Audio frequency harmonic distortion of the emission . 16
5.3.2.4 Residual modulation of the transmitter . 16
5.4 Other test suites . 16
5.4.1 General . 16
5.4.2 Harmonic distortion and rated audio-frequency output power . 16
5.4.3 Receiver audio frequency response . 16
5.4.4 Receiver noise and hum level . 16
ETSI
5 ETSI EN 302 885-3 V1.1.1 (2011-09)
5.4.5 Squelch operation . 16
5.4.6 Squelch hysteresis . 16
5.4.7 Receiver scanning efficiency . 16
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 17
Annex B (informative): The EN title in the official languages . 19
History . 20
ETSI
6 ETSI EN 302 885-3 V1.1.1 (2011-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.2] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1].
See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.1] are summarised in annex A.
The present document is part 3 of a multi-part deliverable covering the Electromagnetic compatibility and Radio
spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile
service operating in the VHF bands with integrated handheld class D DSC, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive".
National transposition dates
Date of ad
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM) - Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC - Part 3: Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive47.020.70Navigacijska in krmilna opremaNavigation and control equipment33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 302 885-3 Version 1.1.1SIST EN 302 885-3 V1.1.1:2011en01-november-2011SIST EN 302 885-3 V1.1.1:2011SLOVENSKI
STANDARD
Harmonized European Standard SIST EN 302 885-3 V1.1.1:2011
ETSI ETSI EN 302 885-3 V1.1.1 (2011-09) 2
Reference DEN/ERM-TG26-086-3 Keywords DSC, maritime, radio, VHF ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 885-3 V1.1.1:2011
ETSI ETSI EN 302 885-3 V1.1.1 (2011-09) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Introduction . 6 1 Scope . 7 2 References . 7 2.1 Normative references . 7 2.2 Informative references . 7 3 Definitions and abbreviations . 8 3.1 Definitions . 8 3.2 Abbreviations . 8 4 Technical requirements specifications . 8 4.1 Environmental profile . 8 4.2 General, operational and technical requirements . 9 4.2.1 General and operational requirements . 9 4.2.1.1 Requirements . 9 4.2.1.2 Conformance . 9 4.2.2 Technical requirements . 9 4.2.2.1 Requirements . 9 4.2.2.2 Conformance . 9 4.3 Environmental requirements . 9 4.3.1 Drop test . 9 4.3.1.1 Definition . 9 4.3.1.2 Requirement . 9 4.3.1.3 Conformance . 9 4.3.2 Temperature tests . 9 4.3.2.1 Definition . 9 4.3.2.2 Dry heat . 9 4.3.2.2.1 Definition. 9 4.3.2.2.2 Requirement . 10 4.3.2.2.3 Conformance . 10 4.3.2.3 Damp heat . 10 4.3.2.3.1 Definition. 10 4.3.2.3.2 Requirement . 10 4.3.2.3.3 Conformance . 10 4.3.2.4 Low temperature . 10 4.3.2.4.1 Definition. 10 4.3.2.4.2 Requirement . 10 4.3.2.4.3 Conformance . 10 4.4 Conformance requirements . 10 4.4.1 Sensitivity of the modulator, including microphone . 10 4.4.1.1 Definition . 10 4.4.1.2 Limit . 10 4.4.1.3 Conformance . 10 4.4.2 Audio frequency response . 11 4.4.2.1 Definition . 11 4.4.2.2 Limit . 11 4.4.2.3 Conformance . 11 4.4.3 Audio frequency harmonic distortion of the emission . 11 4.4.3.1 Definition . 11 4.4.3.2 Limit . 11 4.4.3.3 Conformance . 11 4.4.4 Residual modulation of the transmitter . 11 4.4.4.1 Definition . 11 SIST EN 302 885-3 V1.1.1:2011
ETSI ETSI EN 302 885-3 V1.1.1 (2011-09) 4 4.4.4.2 Limit . 11 4.4.4.3 Conformance . 11 4.4.5 Harmonic distortion and rated audio-frequency output power . 11 4.4.5.1 Definition . 11 4.4.5.2 Limit . 11 4.4.5.3 Conformance . 11 4.4.6 Receiver audio frequency response . 12 4.4.6.1 Definition . 12 4.4.6.2 Limit . 12 4.4.6.3 Conformance . 12 4.4.7 Receiver noise and hum level . 12 4.4.7.1 Definition . 12 4.4.7.2 Limit . 12 4.4.7.3 Conformance . 12 4.4.8 Squelch operation . 12 4.4.8.1 Definition . 12 4.4.8.2 Limit . 12 4.4.8.3 Conformance . 12 4.4.9 Squelch hysteresis . 12 4.4.9.1 Definition . 12 4.4.9.2 Limit . 12 4.4.9.3 Conformance . 12 4.4.10 Receiver scanning efficiency . 13 4.4.10.1 Definition . 13 4.4.10.2 Limit . 13 4.4.10.3 Conformance . 13 5 Testing for compliance with technical requirements . 13 5.1 Test conditions, power supply and ambient temperatures . 13 5.2 Interpretation of the measurement results . 13 5.3 Essential radio test suites . 14 5.3.1 Environmental tests. 14 5.3.1.1 Introduction . 14 5.3.1.2 Procedure . 14 5.3.1.3 Performance check . 14 5.3.1.4 Drop test . 14 5.3.1.4.1 Definition. 14 5.3.1.4.2 Limit . 14 5.3.1.4.3 Conformance . 14 5.3.1.5 Temperature tests . 15 5.3.1.5.1 Dry heat . 15 5.3.1.5.1.1 Definition . 15 5.3.1.5.1.2 Limit . 15 5.3.1.5.1.3 Conformance . 15 5.3.1.5.2 Damp heat . 15 5.3.1.5.2.1 Definition . 15 5.3.1.5.2.2 Limit . 15 5.3.1.5.2.3 Conformance . 15 5.3.1.5.3 Low temperature . 15 5.3.1.5.3.1 Definition . 15 5.3.1.5.3.2 Limit . 15 5.3.1.5.3.3 Conformance . 15 5.3.2 Conformance tests . 15 5.3.2.1 Sensitivity of the modulator, including microphone . 15 5.3.2.2 Audio frequency response . 15 5.3.2.3 Audio frequency harmonic distortion of the emission . 16 5.3.2.4 Residual modulation of the transmitter . 16 5.4 Other test suites . 16 5.4.1 General . 16 5.4.2 Harmonic distortion and rated audio-frequency output power . 16 5.4.3 Receiver audio frequency response . 16 5.4.4 Receiver noise and hum level . 16 SIST EN 302 885-3 V1.1.1:2011
ETSI ETSI EN 302 885-3 V1.1.1 (2011-09) 5 5.4.5 Squelch operation . 16 5.4.6 Squelch hysteresis . 16 5.4.7 Receiver scanning efficiency . 16 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 17 Annex B (informative): The EN title in the official languages . 19 History . 20
ETSI ETSI EN 302 885-3 V1.1.1 (2011-09) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.2] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1]. See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to
...