ETSI EN 302 885-3 V1.1.1 (2011-09)

Harmonized European Standard
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Portable Very High Frequency (VHF) radiotelephone
equipment for the maritime mobile service operating
in the VHF bands with integrated handheld class D DSC;
Part 3: Harmonized EN covering the essential requirements
of article 3.3(e) of the R&TTE Directive

2 ETSI EN 302 885-3 V1.1.1 (2011-09)

Reference
DEN/ERM-TG26-086-3
Keywords
DSC, maritime, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2011.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 302 885-3 V1.1.1 (2011-09)
Contents
Intellectual Property Rights . 6
Foreword . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions and abbreviations . 8
3.1 Definitions . 8
3.2 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 General, operational and technical requirements . 9
4.2.1 General and operational requirements . 9
4.2.1.1 Requirements . 9
4.2.1.2 Conformance . 9
4.2.2 Technical requirements . 9
4.2.2.1 Requirements . 9
4.2.2.2 Conformance . 9
4.3 Environmental requirements . 9
4.3.1 Drop test . 9
4.3.1.1 Definition . 9
4.3.1.2 Requirement . 9
4.3.1.3 Conformance . 9
4.3.2 Temperature tests . 9
4.3.2.1 Definition . 9
4.3.2.2 Dry heat . 9
4.3.2.2.1 Definition. 9
4.3.2.2.2 Requirement . 10
4.3.2.2.3 Conformance . 10
4.3.2.3 Damp heat . 10
4.3.2.3.1 Definition. 10
4.3.2.3.2 Requirement . 10
4.3.2.3.3 Conformance . 10
4.3.2.4 Low temperature . 10
4.3.2.4.1 Definition. 10
4.3.2.4.2 Requirement . 10
4.3.2.4.3 Conformance . 10
4.4 Conformance requirements . 10
4.4.1 Sensitivity of the modulator, including microphone . 10
4.4.1.1 Definition . 10
4.4.1.2 Limit . 10
4.4.1.3 Conformance . 10
4.4.2 Audio frequency response . 11
4.4.2.1 Definition . 11
4.4.2.2 Limit . 11
4.4.2.3 Conformance . 11
4.4.3 Audio frequency harmonic distortion of the emission . 11
4.4.3.1 Definition . 11
4.4.3.2 Limit . 11
4.4.3.3 Conformance . 11
4.4.4 Residual modulation of the transmitter . 11
4.4.4.1 Definition . 11
ETSI
4 ETSI EN 302 885-3 V1.1.1 (2011-09)
4.4.4.2 Limit . 11
4.4.4.3 Conformance . 11
4.4.5 Harmonic distortion and rated audio-frequency output power . 11
4.4.5.1 Definition . 11
4.4.5.2 Limit . 11
4.4.5.3 Conformance . 11
4.4.6 Receiver audio frequency response . 12
4.4.6.1 Definition . 12
4.4.6.2 Limit . 12
4.4.6.3 Conformance . 12
4.4.7 Receiver noise and hum level . 12
4.4.7.1 Definition . 12
4.4.7.2 Limit . 12
4.4.7.3 Conformance . 12
4.4.8 Squelch operation . 12
4.4.8.1 Definition . 12
4.4.8.2 Limit . 12
4.4.8.3 Conformance . 12
4.4.9 Squelch hysteresis . 12
4.4.9.1 Definition . 12
4.4.9.2 Limit . 12
4.4.9.3 Conformance . 12
4.4.10 Receiver scanning efficiency . 13
4.4.10.1 Definition . 13
4.4.10.2 Limit . 13
4.4.10.3 Conformance . 13
5 Testing for compliance with technical requirements . 13
5.1 Test conditions, power supply and ambient temperatures . 13
5.2 Interpretation of the measurement results . 13
5.3 Essential radio test suites . 14
5.3.1 Environmental tests. 14
5.3.1.1 Introduction . 14
5.3.1.2 Procedure . 14
5.3.1.3 Performance check . 14
5.3.1.4 Drop test . 14
5.3.1.4.1 Definition. 14
5.3.1.4.2 Limit . 14
5.3.1.4.3 Conformance . 14
5.3.1.5 Temperature tests . 15
5.3.1.5.1 Dry heat . 15
5.3.1.5.1.1 Definition . 15
5.3.1.5.1.2 Limit . 15
5.3.1.5.1.3 Confor ma nce . 15
5.3.1.5.2 Damp heat . 15
5.3.1.5.2.1 Definition . 15
5.3.1.5.2.2 Limit . 15
5.3.1.5.2.3 Confor ma nce . 15
5.3.1.5.3 Low temperature . 15
5.3.1.5.3.1 Definition . 15
5.3.1.5.3.2 Limit . 15
5.3.1.5.3.3 Confor ma nce . 15
5.3.2 Conformance tests . 15
5.3.2.1 Sensitivity of the modulator, including microphone . 15
5.3.2.2 Audio frequency response . 15
5.3.2.3 Audio frequency harmonic distortion of the emission . 16
5.3.2.4 Residual modulation of the transmitter . 16
5.4 Other test suites . 16
5.4.1 General . 16
5.4.2 Harmonic distortion and rated audio-frequency output power . 16
5.4.3 Receiver audio frequency response . 16
5.4.4 Receiver noise and hum level . 16
ETSI
5 ETSI EN 302 885-3 V1.1.1 (2011-09)
5.4.5 Squelch operation . 16
5.4.6 Squelch hysteresis . 16
5.4.7 Receiver scanning efficiency . 16
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 17
Annex B (informative): The EN title in the official languages . 19
History . 20

ETSI
6 ETSI EN 302 885-3 V1.1.1 (2011-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.2] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1].
See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.1] are summarised in annex A.
The present document is part 3 of a multi-part deliverable covering the Electromagnetic compatibility and Radio
spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile
service operating in the VHF bands with integrated handheld class D DSC, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive".

National transposition dates
Date of ad
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM) - Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC - Part 3: Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive47.020.70Navigacijska in krmilna opremaNavigation and control equipment33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 302 885-3 Version 1.1.1SIST EN 302 885-3 V1.1.1:2011en01-november-2011SIST EN 302 885-3 V1.1.1:2011SLOVENSKI
STANDARD
Harmonized European Standard SIST EN 302 885-3 V1.1.1:2011

ETSI ETSI EN 302 885-3 V1.1.1 (2011-09) 2
Reference DEN/ERM-TG26-086-3 Keywords DSC, maritime, radio, VHF ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 885-3 V1.1.1:2011

ETSI ETSI EN 302 885-3 V1.1.1 (2011-09) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Introduction . 6 1 Scope . 7 2 References . 7 2.1 Normative references . 7 2.2 Informative references . 7 3 Definitions and abbreviations . 8 3.1 Definitions . 8 3.2 Abbreviations . 8 4 Technical requirements specifications . 8 4.1 Environmental profile . 8 4.2 General, operational and technical requirements . 9 4.2.1 General and operational requirements . 9 4.2.1.1 Requirements . 9 4.2.1.2 Conformance . 9 4.2.2 Technical requirements . 9 4.2.2.1 Requirements . 9 4.2.2.2 Conformance . 9 4.3 Environmental requirements . 9 4.3.1 Drop test . 9 4.3.1.1 Definition . 9 4.3.1.2 Requirement . 9 4.3.1.3 Conformance . 9 4.3.2 Temperature tests . 9 4.3.2.1 Definition . 9 4.3.2.2 Dry heat . 9 4.3.2.2.1 Definition. 9 4.3.2.2.2 Requirement . 10 4.3.2.2.3 Conformance . 10 4.3.2.3 Damp heat . 10 4.3.2.3.1 Definition. 10 4.3.2.3.2 Requirement . 10 4.3.2.3.3 Conformance . 10 4.3.2.4 Low temperature . 10 4.3.2.4.1 Definition. 10 4.3.2.4.2 Requirement . 10 4.3.2.4.3 Conformance . 10 4.4 Conformance requirements . 10 4.4.1 Sensitivity of the modulator, including microphone . 10 4.4.1.1 Definition . 10 4.4.1.2 Limit . 10 4.4.1.3 Conformance . 10 4.4.2 Audio frequency response . 11 4.4.2.1 Definition . 11 4.4.2.2 Limit . 11 4.4.2.3 Conformance . 11 4.4.3 Audio frequency harmonic distortion of the emission . 11 4.4.3.1 Definition . 11 4.4.3.2 Limit . 11 4.4.3.3 Conformance . 11 4.4.4 Residual modulation of the transmitter . 11 4.4.4.1 Definition . 11 SIST EN 302 885-3 V1.1.1:2011

ETSI ETSI EN 302 885-3 V1.1.1 (2011-09) 4 4.4.4.2 Limit . 11 4.4.4.3 Conformance . 11 4.4.5 Harmonic distortion and rated audio-frequency output power . 11 4.4.5.1 Definition . 11 4.4.5.2 Limit . 11 4.4.5.3 Conformance . 11 4.4.6 Receiver audio frequency response . 12 4.4.6.1 Definition . 12 4.4.6.2 Limit . 12 4.4.6.3 Conformance . 12 4.4.7 Receiver noise and hum level . 12 4.4.7.1 Definition . 12 4.4.7.2 Limit . 12 4.4.7.3 Conformance . 12 4.4.8 Squelch operation . 12 4.4.8.1 Definition . 12 4.4.8.2 Limit . 12 4.4.8.3 Conformance . 12 4.4.9 Squelch hysteresis . 12 4.4.9.1 Definition . 12 4.4.9.2 Limit . 12 4.4.9.3 Conformance . 12 4.4.10 Receiver scanning efficiency . 13 4.4.10.1 Definition . 13 4.4.10.2 Limit . 13 4.4.10.3 Conformance . 13 5 Testing for compliance with technical requirements . 13 5.1 Test conditions, power supply and ambient temperatures . 13 5.2 Interpretation of the measurement results . 13 5.3 Essential radio test suites . 14 5.3.1 Environmental tests. 14 5.3.1.1 Introduction . 14 5.3.1.2 Procedure . 14 5.3.1.3 Performance check . 14 5.3.1.4 Drop test . 14 5.3.1.4.1 Definition. 14 5.3.1.4.2 Limit . 14 5.3.1.4.3 Conformance . 14 5.3.1.5 Temperature tests . 15 5.3.1.5.1 Dry heat . 15 5.3.1.5.1.1 Definition . 15 5.3.1.5.1.2 Limit . 15 5.3.1.5.1.3 Conformance . 15 5.3.1.5.2 Damp heat . 15 5.3.1.5.2.1 Definition . 15 5.3.1.5.2.2 Limit . 15 5.3.1.5.2.3 Conformance . 15 5.3.1.5.3 Low temperature . 15 5.3.1.5.3.1 Definition . 15 5.3.1.5.3.2 Limit . 15 5.3.1.5.3.3 Conformance . 15 5.3.2 Conformance tests . 15 5.3.2.1 Sensitivity of the modulator, including microphone . 15 5.3.2.2 Audio frequency response . 15 5.3.2.3 Audio frequency harmonic distortion of the emission . 16 5.3.2.4 Residual modulation of the transmitter . 16 5.4 Other test suites . 16 5.4.1 General . 16 5.4.2 Harmonic distortion and rated audio-frequency output power . 16 5.4.3 Receiver audio frequency response . 16 5.4.4 Receiver noise and hum level . 16 SIST EN 302 885-3 V1.1.1:2011

ETSI ETSI EN 302 885-3 V1.1.1 (2011-09) 5 5.4.5 Squelch operation . 16 5.4.6 Squelch hysteresis . 16 5.4.7 Receiver scanning efficiency . 16 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 17 Annex B (informative): The EN title in the official languages . 19 History . 20
ETSI ETSI EN 302 885-3 V1.1.1 (2011-09) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.2] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1]. See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to
...