iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1093-6:2000

(Main)

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet

This European Standard specifies a test rig method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet, operating under defined conditions. The method shall apply to systems that clean air of aerosols (smoke, dust, fume, mist), vapour or gas.  Measurement of the separation efficiency by mass of an air cleaning system for an intended use can serve for the:   a)  evaluation of the performance of an air cleaning system;   b) evaluation of the improvement of the air cleaning system;    c) comparison of air cleaning systems;   d) ranking of air cleaning systems according to their separation efficiency by mass;   e) determination of the state of the art of air cleaning systems of the same intended use with respect to their separation efficiency by mass.

Sicherheit von Maschinen - Bewertung der Emission von luftgetragenen Gefahrstoffen - Teil 6: Masseabscheidegrad, diffuser Auslaß

Diese Europäische Norm legt ein Prüfstandverfahren zur Messung des Masseabscheidegrades von Luftreinigungssystemen mit diffusem Auslaß fest, wobei die Maschinen unter festgelegten Bedingungen betrieben werden. Das Verfahren wird für Systeme angewendet, die die Luft von Aerosolen (Stäuben, Rauchen, Nebel), Dämpfen, oder Gasen reinigen. Die Messung des Masseabscheidegrades eines Luftreinigungssystems für eine bestimmungsgemäße Verwendung kann dienen: a) zur Bewertung des Betriebsverhaltens eines Luftreinigungssystems; b) zur Bewertung von Verbesserungsmaßnahmen an einem Luftreinigungssystem;...

Sécurité des machines - Evaluation de l'émission de substances dangereuses véhiculées par l'air - Partie 6: Efficacité massique de séparation, sortie libre

Cette norme européenne spécifie une méthode de mesurage sur banc d'essai de l'efficacité massique de séparation des épurateurs d'air fonctionnant dans des conditions définies. Cette méthode doit s'appliquer aux séparateurs d'aérosols (poussieres, fumées, brouillards), de vapeurs ou de gaz. Le mesurage de de l'efficacité massique de séparation d'un épurateur d'air pour une utilisation normale peut etre utilisé pour: a) l'évaluation des performances d'un épurateur; b) l'évaluation des améliorations apportées a cet épurateur; c) la comparaison de différents épurateurs;...

Varnost strojev - Vrednotenje emisije nevarnih snovi, ki jih prenaša zrak - 6. del: Učinkovitost ločitve po masi, nekanaliziran izpuh

General Information

Status
Withdrawn
Publication Date
31-May-2000
Withdrawal Date
02-Nov-2008
ICS
13.040.40 - Stationary source emissions
13.110 - Safety of machinery
Technical Committee
VSN - Safety of machinery
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
30-Oct-2008
Due Date
22-Nov-2008
Completion Date
03-Nov-2008
Directive
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
EN 1093-6:1998 - Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet

Relations

Consolidated By
SIST EN 1093-6:2000+A1:2008 - Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet
Effective Date
18-Jan-2023
Consolidated By
SIST EN 1093-6:2000+A1:2008 - Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet
Effective Date
19-Jan-2023
Consolidated By
SIST EN 1093-6:2000+A1:2008 - Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet
Effective Date
01-Dec-2008

Buy Standard

EN 1093-6:2000EN 1093-6:2000
PreviousNext
Standard
EN 1093-6:2000
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Maschinen - Bewertung der Emission von luftgetragenen Gefahrstoffen - Teil 6: Masseabscheidegrad, diffuser AuslaßSécurité des machines - Evaluation de l'émission de substances dangereuses véhiculées par l'air - Partie 6: Efficacité massique de séparation, sortie libreSafety of machinery - Evaluation of the emission of airborne hazardous substan
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1093-1:2009(Main)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
EN 1093-1:2008

This European Standard specifies parameters which can be used for the assessment of the emission of pollutants from machines or the performance of the pollution control systems integrated in machines. It gives guidance on the selection of appropriate test methods according to their various fields of applications and types of machines including the effects of measures to reduce exposures to pollutants. The test methods are given in additional parts of this standard (see Table 1 and Annex A).
This European Standard is not applicable for certain types of off-the-road vehicles powered by internal combustion engines which are also subject to the Machinery Directive.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1093-9:2000+A1:2008(Main)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method
EN 1093-9:1998+A1:2008

This European Standard specifies a room method for the measurement of the pollutant concentration parameter of a specified airborne hazardous substance from machines, located in a test room and operating the machines under defined conditions.
This method can only be used for machines with a local exhaust ventilation with an air flow rate ³ 500 m3/h and machines without recirculated air.
Measurement of the pollutant concentration parameter of a machine can serve for the:
a)   evaluation of the performance of a machine;
b)   evaluation of the improvement of the machine;
c)   comparison of machines within groups of machines with the same intended use (groups are defined by the function and materials processed);
d)   ranking of machines from the same group according to their pollutant concentration parameters;
e)   determination of the state of the art of machines with respect to their pollutant concentration parameter.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1093-7:2000+A1:2008(Main)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet
EN 1093-7:1998+A1:2008

This European Standard specifies a test rig method for the measurement of the separation efficiency by mass of air cleaning systems, operating under defined conditions. The method shall apply to systems that clean air of aerosols (smoke, dust, fume, mist), vapour or gas with defined air inlet and air outlet which can be connected to measurement ducts.
Measurement of the separation efficiency by mass of an air cleaning system for an intended use can serve for the:
a)   evaluation of the performance of an air cleaning system;
b)   evaluation of the improvement of the air cleaning system;
c)   comparison of air cleaning systems;
d)   ranking of air cleaning systems according to their separation efficiency by mass;
e)   determination of the state of the art of air cleaning systems of the same intended use with respect to their separation efficiency by mass.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1093-8:2000+A1:2008(Main)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method
EN 1093-8:1998+A1:2008

This European Standard specifies a test bench method for the measurement of the pollutant concentration parameter of a specified airborne hazardous substance from machines using a test bench under specified operating conditions.
This method is only applicable for the determination of emitted gases, vapours and respirable particles.
The determination of the emission rate in a test bench (see EN 1093-3) shall be used when possible.
Measurement of the pollutant concentration parameter of a machine can serve for the:
a)   evaluation of the performance of a machine;
b)   evaluation of the improvement of the machine;
c)   comparison of machines within groups of machines with the same intended use (groups are defined by the function and materials processed),
d)   ranking of machines from the same group according to their pollutant concentration parameters;
e)   determination of the state of the art of machines with respect to their pollutant concentration parameter.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1093-11:2002+A1:2008(Main)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index
EN 1093-11:2001+A1:2008

This standard describes a method for the measurement of the decontami¬nation index of pollution con¬trol systems e. g. capture devices including local exhaust ventilation, water spray systems and, when appropriate, separation equipment installed on a machine. This method uses the real pollutant (see 4.2 of EN 1093-1 : 1998 “ Safety of machinery — Evaluation of the emission of airborne  hazardous substances — Part 1: Selection of test methods”) and can be operated in room or field environments.
It should be observed that during the test, especially during the shutdown or the removal of the pollution control system, the concentration of hazardous substances , if present, can reach levels which are liable to incur a risk to the health of the operators or other occupants present in the room.
Warning: This standard does not deal with the protective measures required to control these risks.
Measurement of the decontamination index of pollution control system can serve for the:
–   evaluation of the performance of a pollution control system of a machine;
–   evaluation of the improvement of a pollution control system;
–   comparison of pollution control systems for machines of similar design;
–   ranking of pollution control systems according to their decontamination efficiency;
–   determination of the air flow rate in the case of an exhaust system to achieve a given level;
–   determination of the state of the art of pollution control systems for machines with respect to the decontamina¬tion efficiency.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1093-6:2000+A1:2008(Main)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet
EN 1093-6:1998+A1:2008

This European Standard specifies a test rig method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet, operating under defined conditions. The method shall apply to systems that clean air of aerosols (smoke, dust, fume, mist), vapour or gas.
Measurement of the separation efficiency by mass of an air cleaning system for an intended use can serve for the:
a)   evaluation of the performance of an air cleaning system;
b)   evaluation of the improvement of the air cleaning system;
c)   comparison of air cleaning systems;
d)   ranking of air cleaning systems according to their separation efficiency by mass;
e)   determination of the state of the art of air cleaning systems of the same intended use with respect to their separation efficiency by mass.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1093-3:2007+A1:2008(Main)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
EN 1093-3:2006+A1:2008

This European Standard specifies a test bench method for the measurement of the emission rate of a given airborne hazardous substance from machines using a test bench under specified operating conditions of the machine. The measurement of the emission rates of a given pollutant emitted from machines can serve for: a) the evaluation of the performance of a machine; b) the evaluation of the reduction of pollutant emissions of the machine; c) the comparison of machines within groups of machines with the same intended use (groups are defined by the function and materials processed); d) the ranking of machines from the same group according to their emission rates; e) the determination of the state of the art of machines with respect to their emission rates.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1093-4:1998+A1:2008(Main)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method
EN 1093-4:1996+A1:2008

This standard describes a method for the measurement of the capture efficiency of an exhaust system installed on a machine. This method is based on a tracer technique and may be operated in all types of test environment (bench, room and field, see ENV 1093-1). This technique is applicable only if the tracer shows aerodynamic behaviour comparable with the real pollutant (see 7.1.1). The measurement of the capture efficiency of an exhaust system can serve for: a) The evaluation of the performance of an exhaust system of a machine; b) The evaluation of the improvement of an exhaust system c) The comparison of exhaust systems for machines of similar design; d) The ranking of exhaust systems according to their capture efficiency; e) The determination of the air flow rate of an exhaust system to achieve a given level of capture efficiency; f) The determination of the state of the art of exhaust systems for machines with respect to the capture efficiency.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1093-2:2007+A1:2008(Main)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
EN 1093-2:2006+A1:2008

This European Standard specifies a method to enable measurements of the emission rates of gaseous
substances from a single machine, whose operation can be controlled, using tracer gas techniques.
This European Standard is not applicable to machinery which is manufactured before the date of its
publication as an EN.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1093-1:2009(Main)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
EN 1093-1:2008

This European Standard specifies parameters which can be used for the assessment of the emission of pollutants from machines or the performance of the pollution control systems integrated in machines. It gives guidance on the selection of appropriate test methods according to their various fields of applications and types of machines including the effects of measures to reduce exposures to pollutants. The test methods are given in additional parts of this standard (see Table 1 and Annex A).
This European Standard is not applicable for certain types of off-the-road vehicles powered by internal combustion engines which are also subject to the Machinery Directive.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day