SIST EN IEC 60471:2020
(Main)Clevis and tongue couplings of string insulator units - Dimensions (IEC 60471:2020)
Clevis and tongue couplings of string insulator units - Dimensions (IEC 60471:2020)
This international standard applies to string insulator units of the cap and pin type and also of
the long rod type as well as the fittings used with such insulators.
The object of this document is to define the dimensions of a series of clevis and tongue
couplings to permit the assembly of insulators or fittings supplied by different manufacturers.
NOTE 1 IEC 60305 gives the coordination between the standardized dimensions of Table 1 and the strength
classes of cap and pin insulator. IEC 60433 gives the coordination between the standardized dimensions of Table 2
and the strength classes of long rod insulators.
NOTE 2 If the dimensions given in Table 1 are not sufficient, higher strength classes are given in IEC 60305.
Klöppel- und Pfannen-Verbindungen von Isolatorketten - Anschlussmaße (IEC 60471:2020)
Assemblages à chape et tenon des éléments de chaînes d'isolateurs - Dimensions (IEC 60471:2020)
IEC 60471:2020 s’applique aux éléments de chaînes d’isolateurs de type à capot, à tige et également à long fût ainsi qu’aux accessoires métalliques qui leur sont associés. L’objet du présent document est de définir les dimensions d’une série d’assemblages à chape et tenon afin de permettre l’assemblage d’isolateurs ou d’accessoires métalliques fournis par différents fabricants.
Cette troisième édition annule et remplace la deuxième édition parue en 1977. La présente édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
- Selon les résultats du questionnaire (36/424/Q), il est confirmé qu’il n’existe pas de nouveaux assemblages à chape et tenon;
- Concernant les dimensions de tailles d’assemblage normalisées existantes qui caractérisent le même emplacement, le nombre de la taille en vigueur est unifié.
Spojke s stremeni za člene izolatorskih verig - Dimenzije (IEC 60471:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60471:2020
01-december-2020
Spojke s stremeni za člene izolatorskih verig - Dimenzije (IEC 60471:2020)
Clevis and tongue couplings of string insulator units - Dimensions (IEC 60471:2020)
Klöppel- und Pfannen-Verbindungen von Isolatorketten - Anschlussmaße (IEC
60471:2020)
Assemblages à chape et tenon des éléments de chaînes d'isolateurs - Dimensions (IEC
60471:2020)
Ta slovenski standard je istoveten z: EN IEC 60471:2020
ICS:
29.080.10 Izolatorji Insulators
SIST EN IEC 60471:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60471:2020
---------------------- Page: 2 ----------------------
SIST EN IEC 60471:2020
EUROPEAN STANDARD EN IEC 60471
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2020
ICS 29.080.10; 29.240.20
English Version
Clevis and tongue couplings of string insulator units -
Dimensions
(IEC 60471:2020)
Assemblages à chape et tenon des éléments de chaînes Klöppel- und Pfannen-Verbindungen von Isolatorketten -
d'isolateurs - Dimensions Anschlussmaße
(IEC 60471:2020) (IEC 60471:2020)
This European Standard was approved by CENELEC on 2020-08-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60471:2020 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60471:2020
EN IEC 60471:2020 (E)
European foreword
The text of document 36/484/FDIS, future edition 3 of IEC 60471, prepared by IEC/TC 36 "Insulators"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 60471:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-05-13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-08-13
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60471:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60305 NOTE Harmonized as EN 60305
IEC 60383-1 NOTE Harmonized as EN 60383-1
IEC 60433 NOTE Harmonized as EN 60433
IEC 61325 NOTE Harmonized as EN 61325
IEC 62223:2009 NOTE Harmonized as EN 62223:2009 (not modified)
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60471:2020
EN IEC 60471:2020 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-471 2007 International Electrotechnical Vocabulary - - -
Part 471: Insulators
IEC 60120 2020 Ball and socket couplings of string insulator EN IEC 60120 2020
units - Dimensions
3
---------------------- Page: 5 ----------------------
SIST EN IEC 60471:2020
---------------------- Page: 6 ----------------------
SIST EN IEC 60471:2020
IEC 60471
®
Edition 3.0 2020-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Clevis and tongue couplings of string insulator units – Dimensions
Assemblages à chape et tenon des éléments de chaînes d’isolateurs –
Dimensions
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.080.10; 29.240.20 ISBN 978-2-8322-8478-0
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 60471:2020
– 2 – IEC 60471:2020 © IEC 2020
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Couplings . 6
4.1 General . 6
4.2 Couplings with limited movement . 6
4.3 Couplings with unlimited movement . 6
4.4 Designation of couplings . 6
5 Dimensions. 7
Bibliography . 10
Figure 1 – Dimensions of clevis and tongue couplings for cap and pin insulators . 7
Figure 2 – Dimensions of clevis and tongue couplings for long rod insulators . 8
Table 1 – Dimensions of clevis and tongue couplings for cap and pin insulators . 7
Table 2 – Dimensions of clevis and tongue couplings for long rod insulators . 9
---------------------- Page: 8 ----------------------
SIST EN IEC 60471:2020
IEC 60471:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CLEVIS AND TONGUE COUPLINGS OF
STRING INSULATOR UNITS – DIMENSIONS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or in
...
SLOVENSKI STANDARD
oSIST prEN IEC 60471:2019
01-december-2019
Mere spojk s stremeni za člene izolatorskih verig
Dimensions of clevis and tongue couplings of string insulator units
Dimensions des assemblages à chape et tenon des éléments de chaînes d'isolateurs
Ta slovenski standard je istoveten z: prEN IEC 60471:2019
ICS:
29.080.10 Izolatorji Insulators
oSIST prEN IEC 60471:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 60471:2019
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60471:2019
36/466/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60471 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2019-10-04 2019-12-27
SUPERSEDES DOCUMENTS:
36/454/CD,36/462/CC
IEC TC 36 : INSULATORS
SECRETARIAT: SECRETARY:
Australia Ms Manjoo Lalwani
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Dimensions of clevis and tongue couplings of string insulator units
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
Copyright © 2019 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60471:2019
60471/Ed.3/CDV © IEC(E) 2 36/466/CDV
1 CONTENTS
2
3 FOREWORD . 3
4 1 Scope and object . 5
5 2 Normative references . 5
6 3 Terms and definitions . 5
7 4 Designation . 6
8 5 Couplings . 6
9 6 Dimensions . 7
10
11
---------------------- Page: 4 ----------------------
oSIST prEN IEC 60471:2019
60471/Ed.3/CDV © IEC(E) 3 36/466/CDV
12 INTERNATIONAL ELECTROTECHNICAL COMMISSION
13 ____________
14
15 DIMENSIONS OF CLEVIS AND TONGUE COUPLINGS OF STRING
16 INSULATOR UNITS
17
18 FOREWORD
19 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
20 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
21 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
22 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
23 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
24 Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
25 in the subject dealt with may participate in this preparatory work. International, governmental and non-
26 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
27 with the International Organization for Standardization (ISO) in accordance with conditions determined by
28 agreement between the two organizations.
29 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
30 consensus of opinion on the relevant subjects since each technical committee has representation from all
31 interested IEC National Committees.
32 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
33 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
34 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
35 misinterpretation by any end user.
36 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
37 transparently to the maximum extent possible in their national and regional publications. Any divergence
38 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
39 the latter.
40 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
41 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
42 services carried out by independent certification bodies.
43 6) All users should ensure that they have the latest edition of this publication.
44 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
45 members of its technical committees and IEC National Committees for any personal injury, property damage or
46 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
47 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
48 Publications.
49 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
50 indispensable for the correct application of this publication.
51 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
52 patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
53 International Standard IEC 60471 has been prepared by IEC technical committee 36: Insulator.
54 This 3rd edition cancels and replaces the 2nd edition published in 1977. This edition
55 constitutes a technical revision.
56 This edition includes the following significant technical changes with respect to the previous
57 edition:
58 a) According to the results of the questionnaire(36/424/Q), it is confirmed that there is no
59 new clevis and tongue couplings;
60 b) For the dimensions of the existing designated size of couplings that characterize the same
61 location, the effective number of the size is unified.
62 The text of this International Standard is based on the following documents:
FDIS Report on voting
XX/XX/FDIS XX/XX/RVD
---------------------- Page: 5 ----------------------
oSIST prEN IEC 60471:2019
60471/Ed.3/CDV © IEC(E) 4 36/466/CDV
63
64 Full information on the voting for the approval of this International Standard can be found in
65 the report on voting indicated in the above table.
66 This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
67 The committee has decided that the contents of this document will remain unchanged until the
68 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
69 the specific document. At this date, the document will be
70 • reconfirmed,
71 • withdrawn,
72 • replaced by a revised edition, or
73 • amended.
74
---------------------- Page: 6 ----------------------
oSIST prEN IEC 60471:2019
60471/Ed.3/CDV © IEC(E) 5 36/466/CDV
75 DIMENSIONS OF CLEVIS AND TONGUE COUPLINGS OF STRING
76 INSULATOR UNITS
77
78
79
80 1 Scope and object
81 This standard applies to string insulator units of the cap and pin type and also of the long rod
82 type as well as the fittings used with such insulators.
83 The object of this
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.