EN IEC 60471:2020

SLOVENSKI STANDARD
01-december-2020
Spojke s stremeni za člene izolatorskih verig - Dimenzije (IEC 60471:2020)
Clevis and tongue couplings of string insulator units - Dimensions (IEC 60471:2020)
Klöppel- und Pfannen-Verbindungen von Isolatorketten - Anschlussmaße (IEC
60471:2020)
Assemblages à chape et tenon des éléments de chaînes d'isolateurs - Dimensions (IEC
60471:2020)
Ta slovenski standard je istoveten z: EN IEC 60471:2020
ICS:
29.080.10 Izolatorji Insulators
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60471

NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2020
ICS 29.080.10; 29.240.20
English Version
Clevis and tongue couplings of string insulator units -
Dimensions
(IEC 60471:2020)
Assemblages à chape et tenon des éléments de chaînes Klöppel- und Pfannen-Verbindungen von Isolatorketten -
d'isolateurs - Dimensions Anschlussmaße
(IEC 60471:2020) (IEC 60471:2020)
This European Standard was approved by CENELEC on 2020-08-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60471:2020 E
European foreword
The text of document 36/484/FDIS, future edition 3 of IEC 60471, prepared by IEC/TC 36 "Insulators"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-05-13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-08-13
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60471:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60305 NOTE Harmonized as EN 60305
IEC 60383-1 NOTE Harmonized as EN 60383-1
IEC 60433 NOTE Harmonized as EN 60433
IEC 61325 NOTE Harmonized as EN 61325
IEC 62223:2009 NOTE Harmonized as EN 62223:2009 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-471 2007 International Electrotechnical Vocabulary - - -
Part 471: Insulators
IEC 60120 2020 Ball and socket couplings of string insulator EN IEC 60120 2020
units - Dimensions
IEC 60471 ®
Edition 3.0 2020-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Clevis and tongue couplings of string insulator units – Dimensions

Assemblages à chape et tenon des éléments de chaînes d’isolateurs –

Dimensions
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.080.10; 29.240.20 ISBN 978-2-8322-8478-0

– 2 – IEC 60471:2020 © IEC 2020
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Couplings . 6
4.1 General . 6
4.2 Couplings with limited movement . 6
4.3 Couplings with unlimited movement . 6
4.4 Designation of couplings . 6
5 Dimensions. 7
Bibliography . 10

Figure 1 – Dimensions of clevis and tongue couplings for cap and pin insulators . 7
Figure 2 – Dimensions of clevis and tongue couplings for long rod insulators . 8

Table 1 – Dimensions of clevis and tongue couplings for cap and pin insulators . 7
Table 2 – Dimensions of clevis and tongue couplings for long rod insulators . 9

IEC 60471:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CLEVIS AND TONGUE COUPLINGS OF
STRING INSULATOR UNITS – DIMENSIONS

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or in
...