iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1038:1998

(Main)

Identification card systems - Telecommunication applications - Integrated circuit(s) card payphone

Identification card systems - Telecommunication applications - Integrated circuit(s) card payphone

This European Standard specifies the application dependent, IC card characteristics for a payphone application. This European Standard does not define the application independent characteristics. They are defined and described in EN 726-3 and EN 726-4. This European Standard defines the operating procedures and the minimal cardphone requirements for the card related part of the payphone application.

Identifikationskartensysteme - Telekommunikationsanwendungen - Telefone mit Bezahlfunktion mittels Chipkarten

Systemes de cartes d'identification - Applications pour les télécommunications - Publiphone a carte a circuit intégré

La présente norme européenne définit les caractéristiques propres a une application publiphone dans une carte a circuit intégré. Elle ne décrit pas les caractéristiques indépendantes des applications. Celles-ci sont définies et décrites dans l'EN 726-3 et l'EN 726-4.  La présente norme européenne définit les procédures opératoires et les exigences minimales des publiphones a cartes pour ce qui est de la partie carte de l'application publiphone.

Identification card systems - Telecommunication applications - Integrated circuit(s) card payphone

General Information

Status
Published
Publication Date
31-May-1998
ICS
35.240.15 - Identification cards. Chip cards. Biometrics
Technical Committee
BFS - Banking and related financial services
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jun-1998
Due Date
01-Jun-1998
Completion Date
01-Jun-1998
Ref Project
EN 1038:1995 - Identification card systems - Telecommunication applications - Integrated circuit(s) card payphone

Buy Standard

EN 1038:1998EN 1038:1998
PreviousNext
Standard
EN 1038:1998
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Identification card systems - Telecommunication applications - Integrated circuit(s) card payphoneIdentifikationskartensysteme - Telekommunikationsanwendungen - Telefone mit Bezahlfunktion mittels ChipkartenSystemes de cartes d'identification - Applications pour les télécommunications - Publiphone a carte a circuit intégréIdentification card systems - Telecommunication applications - Integrated circuit(s) card payphone35.240.15Identifikacijske kart
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1332-5:2006(Main)
Identification card systems - Man-machine interface - Part 5: Raised tactile symbols for differenciation of application on ID-1 cards
EN 1332-5:2006

The scenario addressed by this European Standard is one where the cardholder operates the card accepting equipment (e.g. a cash dispenser, ticket machine, vending machine, mass transportation). It is assumed that the card is a card conforming to ISO/IEC 7810. Increasing use is being made of machine readable plastic cards. However, some potential user groups such as people who are elderly, disabled, blind or visually impaired could have difficulty in using existing card layouts to distinguish between cards with different functions such as a bank, telephone, pre-payment or social security card. This standard addresses the needs of users who have difficulty reading non-embossed information on plastic cards, including persons with special needs, for example older people, minors, disabled people, visually impaired people, those with learning difficulties, first time users, and those not conversant with the local language. The aim of this standard is to specify the design principles necessary for raised tactile symbols to be incorporated into machine readable cards. This proposed standard, in Clause 6, specifies the form, dimensions and location of tactile identifiers for application with ID-1 cards which do not contain other raised symbols. For cards which already contain raised symbols, an alternative system is specified in Clause 7. It is the responsibility of the card issuer to decide which raised symbols to add to identify applications. The alternative system, as specified in Clause 7, should only be used when the system specified in Clause 6 is not suitable (e.g. when the card already contains embossing). Symbols that comply with Clause 7 should be negotiated between cardholder and issuer. Raised symbols could be introduced in multi applications cards only if issuer can assure that each of these applications will still be active during the card life cycle. Annex A specifies the procedure for assigning symbols according to this standard. Raised symbols should only be used on a card after insuring that they will not interfere with the operation of the card (e.g. antenna for contactless card).

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO/IEC 7816-5:2005(Main)
Identification cards -- Integrated circuit cards -- Part 5: Registration of application providers
ISO/IEC 7816-5:2004

ISO/IEC 7816-4 defines how to use an application identifier to ascertain the presence of and/or perform the retrieval of an application in a card.
ISO/IEC 7816-5:2004 shows how to grant the uniqueness of application identifiers through the international registration of a part of this identifier, and defines
the registration procedure,
the authorities in charge thereof,
the availability of the register which links the registered parts of the identifiers and the relevant application providers.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 726-3:2004(Main)
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 3: Application independent card requirements
EN 726-3:1994

This part of EN 726 specifies the application-independent characteristics of multi-application IC-cards and plug-in modules for telecommunication applications in order to ensure interoperability for telecommunication cards with the various systems and terminals. Mono-application cards are considered tobe a subset of multi-application cards. All common characteristics, necessary for the interactions between the card and the external world are defined.

  • Standard
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 726-7:2004(Main)
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 7: Security module
EN 726-7:1999

This part of EN 726 specifies :  - the minimum security requirements for a Security Module (SM) ;  - the general card related functions embedded in the SM - terminal protocols including minimum data exchange ; The data elements and cryptographic processing described in annex A for the case where the SM is an ICC should be supported if the SM is not an ICC or the configuration of the system, e.g. where the SM handles more than one terminal/user card.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1332-2:2004(Main)
Identification card systems - Man-machine interface - Part 2: Dimensions and location of a tactile identifier for ID-1 cards
EN 1332-2:1998

This European Standard specifies the form, dimensions and location of an edge indentation for a single standard tactile identifier, when applied to ID-1 cards. This edge indentation will appear at the option of the card issuer.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 726-5:2004(Main)
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 5: Payment methods
EN 726-5:1999

This part of EN726 specifies payment methods for telecommunication applications, using ICcards. These payment methods are not necessarily linked to the applications which use them, and they can be used by more than one application. This part of EN 726 gives guidance on the interface between the ICcard and the external world, using the tools given in EN 726-3:1994 and prEN 726-7. This part of EN726 considers an open system, in which the payment methods will be used. A closed system is a special case of the open system.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 726-1:1998(Main)
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 1: Systems overview
EN 726-1:1994

EN 726 defines the requirements for Integrated Circuit (IC) cards and card terminals for telecommunication use in Europe. These requirements are to be used as a European standard to cover multi-application cards to be used for services available on the public telecommunications network via card operated terminals provided by the telecommunication industry. EN 726 specifies a security framework for cards and card terminals for telecommunication use.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1867:1998(Main)
Machine-readable cards - Health care applications - Numbering system and registration procedure for issuer identifiers
EN 1867:1997

This European Standard specifies the application and registration procedures for numbers assignated to issuers of cards used for health care, health care coverage or health care entitlement, that comply with prEN 1387.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 726-6:1998(Main)
Identification card system - Telecommunications integrated circuit(s) cards and terminals - Part 6: Telecommunication features
EN 726-6:1995

This part of EN 726 defines telecommunication features using IC cards. These telecommunication features may be used by more than one application. This part of EN 726 describes the card-terminal interface. However, when needed the system is considered as well. This part of EN 726 describes the following telecommunication features: - Abbreviated Dialling; - Last Number Dialling (stored within the card); - Fixed Number Dialling.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1387:1998(Main)
Machine readable cards - Health care applications - Cards: General characteristics
EN 1387:1996

This European Standard specifies directly or by reference the requirements for cards used for health care, health care coverage or health care entitlement. This European Standard specifies the physical characteristics of cards and the recording techniques, but not the security requirements. It defines the area on each side of the surface of the card allocated to each type of media.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day